Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
NextGen Adhesives G907-32 Structural Adhesive Description: NGAC G907-32 is a thixotropic, epoxy adhesive system utilized extensively in staking, as well as, other industrial and structural applications.Advantages and Applications: The NGAC G907.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
Complete Cure Cycle |
Northstar Polymers FFM-1 Firm-Grade Flexible Open-Cell Foam This foam formulation is particularly designed to make flexible but firm open-cell foam by either hand-mixing or machine casting. This material may be suitable for products that require some load b.. |
|||
Cure Time | 1440 - 2160 min @Temperature 25.0 °C |
24.0 - 36.0 hour @Temperature 77.0 °F |
Complete Cure Cycle |
Northstar Polymers MPP-A47A Liquid Castable Polyurethane MPP-A47A is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott.. |
|||
Cure Time | 1440 - 2880 min @Temperature 25.0 °C |
24.0 - 48.0 hour @Temperature 77.0 °F |
Complete Cure Cycle |
Northstar Polymers MPP-R02C Semi-rigid Polyurethane Foam Formulation MPP-R02C is semi-rigid foam formulations for molded foam products. It is closed-cell light foam with some structural integrity. Unlike rigid polyurethane foams, the physical properties of a cured pr.. |
|||
Cure Time | 1440 min @Temperature 23.0 °C |
24.0 hour @Temperature 73.4 °F |
M10 steel, full strength |
Permabond HM162 Anaerobic Retainer Permabond® HM162 is a medium viscosity retaining compound that cures when confined between metal parts to form an extremely tough bond. It is best suited for cylindrical parts and where high temper.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
Complete Cure Cycle |
Northstar Polymers MPP-A80E High Performance Polyether This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex.. |
|||
Cure Time | >= 1440 min @Temperature 25.0 °C |
>= 24.0 hour @Temperature 77.0 °F |
|
Lord Adhesives HPC-6B Ethylene Acrylic Elastomer Coating LORD HPC-6B and HPC-6C are one-part, room temperature curing ethylene acrylic elastomer (AEM) coatings which feature robust adhesion and exceptional mechanical properties. These coatings enhance ozo.. |
|||
Cure Time | 1440 - 2160 min @Temperature 23.9 °C |
24.0 - 36.0 hour @Temperature 75.0 °F |
|
Master Bond EP21TDCS Two Component Silver Conductive Epoxy Adhesive Master Bond Polymer System EP21TDCS is a two component, silver filled, electrically conductive adhesive for high performance bonding and sealing formulated to cure at room temperature or more rapidl.. |
|||
Cure Time | 1440 - 2880 min @Temperature 23.9 °C |
24.0 - 48.0 hour @Temperature 75.0 °F |
|
Master Bond Supreme 11ANHT Fast Curing Epoxy Paste System Description: Master Bond Polymer System SUPREME 11ANHT is a two component epoxy resin system for high performance bonding and sealing formulated to cure at room temperature or more rapidly at elevat.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond 216C03 Flexible Plastic Bonder TRA-BOND 216C03 is a flexible thixotropic bonding adhesive designed for bonding all types of plastics including nylon, PVC, polyethylene, acrylic, lexan, polypropylene, kapton or almost any thermopl.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond FDA22BK01 Food and Drug Application Epoxy Adhesive TRA-BOND FDA-22BK01 is a high viscosity epoxy resin system specifically developed for bonding and coating applications in accordance. This two-part black adhesive is easily mixed, used and cured at .. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Duct 916H04 Room Temperature Cure, Conductive Silver Epoxy Adhesive TRA-DUCT 916H04 is an electrically conducting silver-filled epoxy compound recommended for electronic bonding and sealing applications that require a combination of good mechanical and electrical pr.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond RO7 Radio Opaque Epoxy Adhesive TRA-BOND RO-7 is a high viscosity epoxy resin system specifically developed for adhesive and coating applications where radio opacity is required. It can be used as an X-ray marker on in-vitro medic.. |
|||
Cure Time | 1440 min @Temperature 43.0 °C |
24.0 hour @Temperature 109 °F |
Full Chemical |
Chesterton ARC 890 Course Grade Sliding Wear Compound An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at the thickness of 6 mm (1/4”).. |
|||
Cure Time | 1440 min @Temperature 32.0 °C |
24.0 hour @Temperature 89.6 °F |
Full Chemical |
Chesterton ARC S2 Ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% soli.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
Full Load |
Chesterton MRS SD4i Metal Rebuilding System An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10 – 15 mils) per coat. Non-shri.. |
|||
Cure Time | 1440 - 2880 min @Temperature 25.0 °C |
24.0 - 48.0 hour @Temperature 77.0 °F |
|
Cytec (Conap) FR-1273 Conapoxy® Resin / Conacure® Hardener Epoxy Potting and Encapsulating Systems for Electronic ApplicationsHigh technology epoxy resin systems for potting and encapsulation, for the defense, aerospace, electronics, computer, automotive an.. |
|||
Cure Time | 1440 min @Temperature 23.0 °C |
24.0 hour @Temperature 73.4 °F |
minimum |
Epoxy Technology EPO-TEK® 730 Unfilled Black General and Structural Grade Epoxy Material Description: A two component, room temperature curing, general and structural grade epoxy. It can be used for adhesive, sealing, and encapsulating applications in medical, xray device, fil.. |
|||
Cure Time | 1440 - 1800 min @Temperature 10.0 °C |
24.0 - 30.0 hour @Temperature 50.0 °F |
De-Mold Time: 3.5-4 hrs |
3M Scotchcast™ 2130 Flame-Retardant Compound 3M Scotchcast Flame-Retardant Compound 2130 is a two-part polyurethane resin designed to replace the cable jacket when splicing or repairing mine and portable cables. Its unique formulation makes it.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Atom Adhesives AA-BOND 2104 Epoxy Adhesive AA-BOND 2104 is a thixotropic epoxy system recommended for critical electronics, aerospace and industrial bonding, laminating and reinforcing applications requiring an adhesive with high-fill, non-s.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Atom Adhesives AA-BOND 2153 Epoxy Adhesive AA-BOND 2153 is a thixotropic (smooth paste) thermal conductive epoxy system that passes the NASA Outgassing Specification. It is used for staking transistors, diodes, resistors, integrated circuits.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Atom Adhesives AA-BOND 428 Epoxy Adhesive AA-BOND 428 is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength. AA-BOND 428 contains .. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond F114 Optically Clear, Low Viscosity Blush-Free Epoxy Adhesive TRA-BOND F114 is a clear, low viscosity, room temperature cure, epoxy system with good optical properties that contains no solvents, has excellent wicking and wetting characteristics, and adheres st.. |
|||
Cure Time | 1440 min @Temperature 23.0 °C |
24.0 hour @Temperature 73.4 °F |
M10 steel, full strength |
Permabond A025 Anaerobic Retainer Permabond® A025 is an anaerobic adhesive formulated to provide permanent locking and sealing of metal parts such as bearings, gears, studs and other threaded components. It has been designed for ap.. |
|||
Cure Time | 1440 min @Temperature 23.0 °C |
24.0 hour @Temperature 73.4 °F |
M10 steel, full strength |
Permabond A134 Anaerobic Retainer Permabond® A134 is a high-strength anaerobic product designed for the permanent locking and sealing of metal parts. Its 'non-drip' formulation makes it suitable for use on larger fittings, coarse t.. |