Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 288 °C | 550 °F | Fired Heaters |
Paratherm Corporation Paratherm™ GLT™ Heat Transfer Fluid Paratherm GLT™ Heat Transfer Fluid is an alkylated aromatic based heat transfer fluid formulated for closed loop liquid phase heating systems to 550°F using fired heaters and to 575°F in waste-he.. |
|||
Maximum Service Temperature, Air | >= 288 °C | >= 550 °F | Shear Adhesive Failure (polyester failure) |
Dielectric Polymers NT-590DL Protective Film
(discontinued **) Crosslinked silicone adhesive with polyimide film backing.Features: U.L. recognized Class 392°FHigh temperature resistantDie cut disks/shapes remove easily from linerClean tape removalApplications:.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Technetics Group PLASTOLON™ PTFE Outdoor Fiber
(Unverified Data**) Information provided by Technetics Group (formerly Plastomer Technologies) |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Manifattura Cattaneo RULON® 641 Polytetrafluoroethylene Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Manifattura Cattaneo RULON® J Polytetrafluoroethylene Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Manifattura Cattaneo RULON® W2 Polytetrafluoroethylene Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Henkel Hysol EA 9673 (BMI) Film Adhesive Modified BMI film adhesive, superior strength to 550°F / 288°C. Moisture resistant, processes like conventional high temperature epoxies. Minimum order required. Data from 0.10 psf, 500 g / m2.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | Continuous |
Saint-Gobain Rulon® 125 Bearing/Seal PTFE Rulon 125 is used primarily in applications that are not severe such as dryer drum slides and piston rings in pneumatic or hydraulic controls.Information provided by distributor TriStar Plastics Cor.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Saint-Gobain Rulon® 1337 Bearing/Seal PTFE Rulon® 1337 is a tan material made entirely from FDA compliant components. It has excellent physical properties and is chemically compatible with most chemicals, except concentrated sulfuric acid.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Saint-Gobain Rulon® 1410 Grade Bearing/Seal PTFE Description: Rulon® is the Saint-Gobain trade name for their family of proprietary PTFE compounds. This family of materials offers the combination of high compressive strength, low coefficient of.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | Short Term |
Saint-Gobain Rulon® 954 Bearing/Seal PTFE A conductive PTFE material that is available in tape, sheet (extruded) and rod (extruded).Information provided by distributor TriStar Plastics Corp. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | Continuous |
Saint-Gobain Rulon® AMR Bearing/Seal PTFE Same base material as Rulon AR but Rulon AMR contains a percentage of molybdenum disulfide for increased wear resistance and lower coefficient of friction. Typically used as a seal or gasket, Rulon .. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | Continuous |
Saint-Gobain Rulon® DC1042 Bearing/Seal PTFE Can be used in a wide range of sealing and bearing applications. Rulon DC1042 is ideal for applications in which the bearing, seal is in contact with harsh chemicals or in applications where electri.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Saint-Gobain Rulon® LR Grade Bearing/Seal PTFE Description: Rulon® is the Saint-Gobain trade name for their family of proprietary PTFE compounds. This family of materials offers the combination of high compressive strength, low coefficient of.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Saint-Gobain Rulon® XL Grade Bearing/Seal PTFE Description: Rulon® is the Saint-Gobain trade name for their family of proprietary PTFE compounds. This family of materials offers the combination of high compressive strength, low coefficient of.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Saint-Gobain Rulon® AR Bearing/Seal PTFE Rulon® AR is somewhat more flexible than Rulon® LR, hence suitable for seals and bonded coating of slide surfaces. It has many decades of use in automotive shaft seals and fuel metering pump c.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | intermittent |
Thermoseal RG-S160 PTG Gasketing Thermoseal RG-S160 offers exceptional sealability and crush resistance in a wide range of applications. RG-S160 is composed of a blend of aramid, mineral, and cellulose fibers and graphite and other.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
DayGlo GloPrill Hyperdispersed Colorant GloPrill is a high-performance fluorescent colorant developed especially for polyolefins. Designed with the plastics concentrate/masterbatch producer in mind, these supercharged colorants develop br.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | Intermittent |
3M 3615 General Purpose Glass Cloth Tape 3M™ Glass Cloth Tape 3615 is a general purpose, easy unwind tape coated with a silicone adhesive for many applications requiring high-temperature resistance, high adhesion, and a very strong, abras.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Technetics Group PLASTOLON™ PTFE Filtration Sewing Thread
(Unverified Data**) Information provided by Technetics Group (formerly Plastomer Technologies) |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Technetics Group PLASTOLON™ PTFE Weaving Fiber
(Unverified Data**) Information provided by Technetics Group (formerly Plastomer Technologies) |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | Intermittent |
Plasma Coatings 300 Surface Material Information provided by Plasma Coatings |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | Maximum recommended service temperature. |
DuPont Performance Polymers Kalrez® 1050LF FFKM Perfluoroelastomer A general-purpose compound for O-rings, seals, and other parts used in chemical process industries. It has good hot water/steam, excellent amine resistance, and enhanced compression set properties... |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | optimum use range |
Paratherm Corporation Paratherm™ OR Heat Transfer Fluid Description: Paratherm OR® is a sludge-resistant heat transfer fluid that combines substantial oxidation resistance with excellent thermal efficiency, high flash and fire points and extended servic.. |
|||
Maximum Service Temperature, Air | 288 °C | 550 °F | |
Saint-Gobain Rulon® J Grade Bearing/Seal PTFE Description: Rulon® is the Saint-Gobain trade name for their family of proprietary PTFE compounds. This family of materials offers the combination of high compressive strength, low coefficient of f.. |