- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Saint-Gobain Rulon® 1337 Bearing/Seal PTFE
Saint-Gobain Rulon® 1337 Bearing/Seal PTFE
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE |
| Manufacturer | Saint-Gobain Perfomance Plastics |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Saint-Gobain Rulon® 1337 Bearing/Seal PTFE.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Rulon® 1337 is a tan material made entirely from FDA compliant components. It has excellent physical properties and is chemically compatible with most chemicals, except concentrated sulfuric acid. This offers much flexibility in wash-down environments of food and pharmaceutical processing environments. It has a slightly lower coefficient of friction than Rulon J, offering extended life and less abrasion with softer mating surfaces. It is compatible with most commercially available natural lubricants for additional reduction in friction.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.11 g/cc | 0.0762 lb/in³ | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | 17.2 MPa | 2490 psi | ASTM D638 |
| Elongation at Break | 175 % | 175 % | ASTM D638 |
| Compressive Yield Strength | 6.89 MPa | 1000 psi | Max load under tribological use |
| Coefficient of Friction, Dynamic | 0.10 - 0.20 | 0.10 - 0.20 | Dry vs. Steel |
| Coefficient of Friction, Static | 0.10 - 0.20 | 0.10 - 0.20 | Dry vs. Steel |
| Limiting Pressure Velocity | 0.350 MPa-m/sec | 9990 psi-ft/min |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 133 µm/m-°C @Temperature 25.6 - 93.3 °C |
74.0 µin/in-°F @Temperature 78.0 - 200 °F |
Length |
| CTE, linear, Transverse to Flow | 110 µm/m-°C @Temperature 25.6 - 93.3 °C |
61.0 µin/in-°F @Temperature 78.0 - 200 °F |
Diameter |
| Thermal Conductivity | 0.331 W/m-K | 2.30 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 288 °C | 550 °F | |
| Minimum Service Temperature, Air | -240 °C | -400 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Application Environment | Dry | |
| Steam | ||
| Vacuum | ||
| Wet | ||
| Color | Tan |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Wire & Cable JAC32A Polyvinyl Chloride, Flexible (PVC, Flexible)
- S&E Specialty Polymers TufGuard M™ GPP1001VOM-HCO-15 PP, Flame Retardant
- Hybrid Plastics NanoBondâ„¢ UV Curable Adhesive
- Lubriplate FGL 1 Aluminum Complex USP Mineral Oil-Based Food Machinery Grade Grease
- Ineos ABS Lustran® SAN Sparkle Highest-Clarity
- Lucent Polymers POM-100 Acetal Copolymer, General Purpose, Injection Grade
- Solvay MACKADET® SBC--8 Surfactant
- SABIC Innovative Plastics LNP STAT-KON KD000 Acetal Copolymer
- Compuestos Dominicanos Polycom VN-050485 PVC
- BASF Lupragen® N 105 N-Methylmorpholine
Copyright © lookpolymers.com All Rights Reserved