Saint-Gobain RulonÂ® AMR Bearing/Seal PTFE

Category	Polymer , Thermoplastic
Manufacturer	Saint-Gobain Perfomance Plastics
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Saint-Gobain RulonÂ® AMR Bearing/Seal PTFE.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Same base material as Rulon AR but Rulon AMR contains a percentage of molybdenum disulfide for increased wear resistance and lower coefficient of friction. Typically used as a seal or gasket, Rulon AMR is specified in many military and commercial applications for hydraulic and pneumatic controls.Information provided by distributor TriStar Plastics Corp.

Physical Properties	Metric	English	Comments
Density	2.30 g/cc	0.0831 lb/inÂ³

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65	65
Tensile Strength, Yield	10.3 MPa	1500 psi
Elongation at Break	130 %	130 %
Flexural Strength	4.14 MPa	600 psi
Izod Impact, Notched	3.20 J/cm	6.00 ft-lb/in
Coefficient of Friction, Dynamic	0.010	0.010	Dry vs. Steel
Coefficient of Friction, Static	0.025	0.025	Dry vs. Steel
Limiting Pressure Velocity	0.350 MPa-m/sec	10000 psi-ft/min

Thermal Properties	Metric	English	Comments
CTE, linear	128 Âµm/m-Â°C	71.0 Âµin/in-Â°F
Thermal Conductivity	0.331 W/m-K	2.30 BTU-in/hr-ftÂ²-Â°F
Maximum Service Temperature, Air	288 Â°C	550 Â°F	Continuous
	316 Â°C	600 Â°F	Short Term
Deflection Temperature at 1.8 MPa (264 psi)	116 Â°C	240 Â°F
Minimum Service Temperature, Air	-240 Â°C	-400 Â°F	Embrittlement Temp
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm
Dielectric Constant	2.5 @Frequency 1.00e+6 Hz	2.5 @Frequency 1.00e+6 Hz
Dielectric Strength	14.8 kV/mm	375 kV/in	Short Term

Users viewing this material also viewed the following: