Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638 |
Plaskolite West Optix® CA-1000 IG UC Clear High Impact Acrylic Resin High impact acrylic resin, injection molding and extrusion gradeApplications: A premium impact acrylic resin particularly suited for medical and food uses. This resin is suited for Gamma irradiatio.. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638-61T |
Rotuba 860MH 686.4 Ethyl Cellulose Data provided by the manufacturer. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | |
Reliance Industries METABOLIX PHB Information provided by Reliance Industries |
|||
Tensile Strength, Ultimate | 40.0 - 200 MPa @Strain 0.500 - 5.00 % |
5800 - 29000 psi @Strain 0.500 - 5.00 % |
Average value: 93.9 MPa Grade Count:1 |
Overview of materials for Polybutylene Terephthalate (PBT), 30% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), 30% Glass Fiber Filled". Specific grades with glass content between 25.. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638 |
PolyOne Edgetek® AS-1000 SD Unreinforced ABS - Antistatic Protection
(discontinued **) Data provided by PolyOne. |
|||
Tensile Strength, Ultimate | 40.0 - 60.0 MPa | 5800 - 8700 psi | 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 3208/0150 Anti-friction PVDF Compound
(discontinued **) Key features of this grade: Anti-friction, Formulated. Recommended processing is injection. Available as granules.General information about SOLEF® PVDF: SOLEF® PVDF is a fluorinated semi-crysta.. |
|||
Tensile Strength, Ultimate | 40.0 - 119 MPa | 5800 - 17300 psi | Average value: 53.1 MPa Grade Count:32 |
Overview of materials for Phenolic, Novolac, Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Phenolic, Novolac, Mineral Filled". Each property range of values reported is minimum and maximum values.. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM data at 5 mm/min. |
BASF Capron® 8230G HS 6% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron 8230G HS is a heat stabilized, 6% nylon 6 molding compound offering improved stiffness and dimensional stability in thin sections. It exhibits a combination of strength, stiffness and perfor.. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | |
Kraton® G1657 + PA-6 blend (8/12/80) Blending KRATON D and G polymers with PA significantly improves the toughness at both room and low temperatures. KRATON polymers are block segments of styrene and rubber monomers (A-B, A-B-A, or [A.. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638 |
Hannam Chemical Hanalac 795 ABS, Pipe Grade Designed for pipe and bobbin sleeves. Excellent processability and high impact strength. Manufactured to prevent static electricity. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638 |
Solvay Specialty Polymers Algoflon® F 5 Polytetrafluoroethylene (PTFE) Algoflon® F 5 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for filled grades and in particular is recommended for compounds with glass fiber .. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | 20 in/min, at max load; ASTM D412 |
A. Schulman POLYPUR™ FPU 1112 Thermoplastic Polyurethane Compound (15% Glass) Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638 |
Tipco Tipcolite® TG 613 Phenolic Compound, Mineral & Wood Flour, Soft Flow & Good Surface Finish Soft Flow Phenolic Compound, Reinforced with Mineral & Wood FlourApplications: General PurposeProcessing: Compression MoldingInformation provided by the Manufacturer, Tipco Industries Ltd.,
India... |
|||
Tensile Strength, Ultimate | 40.0 - 50.0 MPa | 5800 - 7250 psi | ASTM D638 |
Zeus EFEP Tubing |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | 20 in/min, at max load; ASTM D412 |
A. Schulman POLYPUR™ FPU 1112 Thermoplastic Polyurethane Compound (15% Glass) Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638 |
Plenco 6343 Phenolic, Granular, Compression Molded PLENCO 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recogniz.. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | |
BASF Procom® GC20S 400 Polypropylene Uses: electrical appliance housings (e.g. drills), components requiring high impact and temperature resistance, furniture frames.Data was collected by ISO methods and provided by BASF. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ATSM D638 |
Ashley Polymers Ashlene® P261WO PPO A general purpose V-2 and V-0 rated resin for injection molding.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D412 |
BASF Elastollan® C-64D Polyester Type Polyurethane Elastomer Recommended for injection molding. Elastollan C series of products are polyester-based thermoplastic polyurethanes that exhibit very good hydrolytic stability. They also exhibit excellent oil, fue.. |
|||
Tensile Strength, Ultimate | 40.0 - 100 MPa @Temperature -40.0 - 80.0 °C |
5800 - 14500 psi @Temperature -40.0 - 176 °F |
Average value: 71.0 MPa Grade Count:1 |
Overview of materials for Nylon 66, 20% Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 20% Mineral Filled". Specific grades with primary filler content between 15% and 24% are inclu.. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638 |
Plaskolite West Optix® CA-1000 IG Clear High Impact Acrylic Resin High impact acrylic resin, injection molding and extrusion gradeApplications: A premium impact acrylic resin particularly suited for medical and food uses. This resin is suited for Gamma irradiatio.. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D412 |
Dow PELLETHANE® 2103-75D Film Grade Thermoplastic Polyurethane Elastomer
(discontinued **) Description: PELLETHANE® 2103-75D UV stabilized, polyether based thermoplastic polyurethane elastomer has excellent hydrolytic stability and excellent resistance to micro-organisms. Applications in.. |
|||
Tensile Strength, Ultimate | 40.0 MPa | 5800 psi | ASTM D638 |
Solvay Specialty Polymers Algoflon® F6 PTFE (Polytetrafluoroethylene)
(discontinued **) Data provided by the manufacturer.Type II Classification. Suspension polymer powder grade recommended for compression molding and extrusion. PTFE possesses high inertness, excellent dielectric prope.. |
|||
Tensile Strength, Ultimate | 40.0 - 85.0 MPa @Temperature 60.0 - 90.0 °C |
5800 - 12300 psi @Temperature 140 - 194 °F |
Average value: 78.1 MPa Grade Count:12 |
Overview of materials for Polypropylene, Long Glass Fiber 50% This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Long Glass Fiber 50%". Specific grades with glass content between 45% and 54% are include.. |
|||
Tensile Strength, Ultimate | 40.0 - 175 MPa | 5800 - 25400 psi | Average value: 105 MPa Grade Count:16 |
Overview of materials for Polybutylene Terephthalate (PBT), Carbon Black Filled This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), Carbon Black Filled". Each property range of values reported is minimu.. |