Polymer Property : Film Tensile Strength at Yield, TD = 11.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ISO 527-3
Polimeri Europa Flexirene® FF 25 Butene Copolymer Linear Low Density Polyethylene Flexirene FF 25 is a butene copolymer linear low density polyethylene (C4-LLDPE), with antioxidants, suitable for blown film extrusion.Flexirene FF 25 is characterized by a high elongational viscosi..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ISO 527-3
Polimeri Europa Riblene® FF 20 Low Density Polyethylene - Blown Film Extrusion Riblene FF 20 is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FF 20 is characterized by a good melt strength leading to a good bubble stability..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ISO 527-3
Polimeri Europa Riblene® FL 23 Low Density Polyethylene - Blown Film Extrusion Riblene FL 23 is a low density polyethylene (LDPE) with added slip agent, suitable for blown film extrusion. Riblene FL 23 is characterized by a good balance between processability and mechanical p..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ISO 527-3
Polimeri Europa Riblene® FL 30 Low Density Polyethylene - Blown Film Extrusion Riblene FL 30 is a low density polyethylene (LDPE) ideal for blown film extrusion. Riblene FL 30 is characterized by a good balance between processability, mechanical and optical properties.Films m..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ISO 527-3
Polimeri Europa Riblene® FL 34 E Low Density Polyethylene - Blown Film Extrusion Riblene FL 34 E is a low density polyethylene (LDPE) with added slip and antiblocking agents, suitable for blown film extrusion. Riblene FL 34 E is characterized by a good balance between processab..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
NOVA Chemicals Novapol® TD-9022-C Superhexene LLDPE Puncture value is 60 J/mm. Additive Package: Antiblock.Applications: industrial liners, heavy duty packaging.Film properties are typical of 25 µm blown film extruded at a blow-up ratio of 2.5:1, b..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D 882
NOVA Chemicals Surpass® FPs021-F Octene sLLDPE Film Resin, 75 Micron Film FPs021-F complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food.NOVA Chem..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ISO 527-3
Polimeri Europa Clearflex® CM 406 Hexene Copolymer Linear Low Density Polyethylene Clearflex CM 406 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for cast film extrusion.Films manufactured with Clearflex CM 406 are characterized by h..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
NOVA Chemicals Sclair® 11P4 Butene LLDPE Film Resin (discontinued **) Film Properties. Features: Low gel, excellent sealing characteristics, easy processability.Applications: Specialty lamination, co-extrusion.Data provided by the manufacturer.
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
NOVA Chemicals Novapol® PF-Y821-B Butene LLDPE Film Resin (discontinued **) Film Properties. Features: Good stiffness and machinability, good clarity with LDPE.Applications: General purpose packaging, liners.Data provided by the manufacturer.
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
Eastman D4008-F Polyethylene (discontinued **) Polyethylene D4008-F is a fractional melt formulation designed for film applications. It is suggested for applications requiring toughness and clarityList of Applications: Food packagingFood-contac..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
Eastman E6838-014F Polyethylene (discontinued **) E6838-014F is a low density formulation that contains low slip and medium antiblock levels. It is suggested for film applications that require clarity.List of Applications: Food packagingFood-conta..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
LyondellBasell Montell 16501F6 Butene LLDPE Key Features: butene LLDPE resins for film extrusion applications, easy processing, low gels, good strength, low slip, high antiblockApplications: can liners and trash bags, blends, thin filmsMeets ..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
LyondellBasell Montell 16502F7 Butene LLDPE Key Features: butene LLDPE resins for film extrusion applications, easy processing, low gels, good strength, low slip, medium antiblockApplications: can liners and trash bags, blends, thin filmsMeet..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
LyondellBasell PetrotheneÂ® NA345184 Low Density Polyethylene (Film Extrusion) ApplicationsPETROTHENE NA 345 is a series of homopolymer resins combining premium clarity with strength and stiffness. In addition, NA 345 exhibits good impact strength on both flat and creased fil..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
Iran Petrochemical (PCC) LL0220KJ Linear Low Density Polyethylene LL0220KJ are linear low density polyethylene copolymers containing butane-1 as the comonomer.Applications: shipping sacks, carrier and garbage bags, consumer packaging, high clarity film, agricultu..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ISO R527-1
Iran Petrochemical (PCC) 2004TC37 Low Density Polyethylene LDPE 2004TC37: Light duty film used for very thin films requiring good optical properties for general packaging.Information provided by Iran Petrochemical Commercial Co.
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ISO 1184
SIDPEC EGYPTENEÂ® LL 0220 KJ LLDPE Film Applications: Light and medium duty film.Film properties were measured on 38 micron film extruded at a blow up ratio of 2:1.Information provided by Interchim s.r.l., official distributor of Sidi Ke..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
Total Lotrene® Q1018N Linear Low Density Polyethylene, Blown Film Lotrene® Q1018 Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer. They are designed for blown film applications and can be used in pure..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
Total Lotrene® Q2018H Linear Low Density Polyethylene, Blown Film Lotrene® Q2018 Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer. They are designed for film applications and can be used in pure form ..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
Total Lotrene® Q1018H Linear Low Density Polyethylene, Blown Film Lotrene® Q1018 Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer. They are designed for blown film applications and can be used in pure..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
ExxonMobil Enable™ 20-05HH Metallocene Polyethylene Resin (Asia Pacific Grade) Product Description: Enable 20-05 resins are metallocene ethylene-hexene copolymers. Enable mPE resins offer an outstanding balance between processing and film properties, including tensile, impact ..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
ExxonMobil LD 105.30 Very High Clarity Packaging Film Resin Product Description: LD 105 resins are homopolymer packaging film resins designed for applications requiring outstanding clarity with good stiffness. These resins can be processed in either blown or..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
ExxonMobil LD 105.BR Very High Clarity Packaging Film Resin Product Description: LD 105 resins are homopolymer packaging film resins designed for applications requiring outstanding clarity with good stiffness. These resins can be processed in either blown or..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
ExxonMobil LD 143.26 High Clarity Packaging Film Resin Product Description: LD 143.26 is a homopolymer packaging film resin with excellent clarity and good stiffness. It is suitable for processing in either blown or cast film equipment. In blown film eq..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
ExxonMobil LDPE LD 100AC Low Density Polyethylene Resin Product Description: LD 100 series are LDPE grades, offering a good balance of optical and mechanical properties. Several additive packages are available according to the required surface properties..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
ExxonMobil LDPE LD 185JD Low Density Polyethylene Resin (European Grade) Product Description: LD 185 series offer good optical properties and sealing characteristics. LD 185 is manufactured with narrow specifications to suit the high consistency requirements of laminatio..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
NOVA Chemicals Sclair® 11G1 LLDPE Film Resin (discontinued **) Low gel, Excellent seal characteristics, Easy processabilityApplications: Premium shrink film, Co-extrusionAdditives: Process stabilizer, Polymer process aidFilm properties are typical of blown film..
Film Tensile Strength at Yield, TD	11.0 MPa	1600 psi	ASTM D882
Eastman D4052-F Polyethylene (discontinued **) D4052-F is a fractional-melt low density formulation with low slip and low antiblock. It is suggested for film applications requiring impact strength, outstanding clarity, and good tear resistance...