Category | Polymer , Film , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE)/Butene, Film |
Manufacturer | Total Atofina |
Trade Name | Lotrene® |
Port | Shanghai port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Total Lotrene® Q1018H Linear Low Density Polyethylene, Blown Film.pdf ![]() |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 0.918 g/cc | 0.918 g/cc | ASTM D792 |
Thickness | 40.0 microns | 1.57 mil | |
Melt Flow | 1.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
1.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Antiblock Level | 3200 ppm | 3200 ppm | |
Slip Level | 1500 ppm | 1500 ppm | Erucamide |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Film Tensile Strength at Yield, MD | 11.0 MPa | 1600 psi | ASTM D882 |
Film Tensile Strength at Yield, TD | 11.0 MPa | 1600 psi | ASTM D882 |
Film Elongation at Break, MD | 800 % | 800 % | ASTM D882 |
Film Elongation at Break, TD | 850 % | 850 % | ASTM D882 |
Elmendorf Tear Strength, MD | 7.10 g/micron | 180 g/mil | ASTM D1922 |
Elmendorf Tear Strength, TD | 12.2 g/micron | 310 g/mil | ASTM D1922 |
Dart Drop Test | 150 g | 0.331 lb | F50; ASTM D1709 |
Film Tensile Strength at Break, MD | 38.0 MPa | 5510 psi | ASTM D882 |
Film Tensile Strength at Break, TD | 33.0 MPa | 4790 psi | ASTM D882 |
1% Secant Modulus, MD | 215 MPa | 31200 psi | ASTM D882 |
1% Secant Modulus, TD | 245 MPa | 35500 psi | ASTM D882 |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 122 °C | 252 °F | Crystalline; ISO 11357 |
Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 (A120) |
Optical Properties | Metric | English | Comments |
---|---|---|---|
Haze | 11 % | 11 % | ASTM D1003 |
Gloss | 60 % | 60 % | at 45°; ASTM D2457 |
Processing Properties | Metric | English | Comments |
---|---|---|---|
Processing Temperature | 180 - 220 °C | 356 - 428 °F | Extrusion |
Melt Temperature | 200 °C | 392 °F | |
Die Opening | >= 0.180 cm | >= 0.0709 in | |
Blow-up Ratio (BUR) | 2.0 - 3.0 | 2.0 - 3.0 |