Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Modulus = 2.20 GPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Modulus 2.20 GPa
319 ksi
Plastcom SLOVALEN PH 96 FRD 1 PP, flame retardant
FeaturesDetermined for environment, where contact with water is possible, because the electric properties do not change by conditioning. Application - terminals, coil forms, guides in washing machin..
Tensile Modulus 2.20 GPa
319 ksi
Polycasa Acryl® KR 2015/1 Acrylic, Impact Grade
Medium-impact grade with very good flow behavior, especially mechanically stressed parts with long flow paths; e.g. strip light diffusers. Can be extruded into thin tubes, sheet and film.Data was c..
Tensile Modulus 2.20 GPa
319 ksi
1 mm/min; ISO 527
SABIC Innovative Plastics Lexan® HFD1910 PC Copolymer (Asia Pacific)
55 MFR LEXAN High Flow Ductile Copolymer, Natural colors only
Tensile Modulus 2.20 GPa
319 ksi
ASTM-D638
Ineos ABS Lustran® 256 Extrusion Blending Grade
Lustran® ABS 256 resin is a natural, medium-flow, medium-impact, low-gloss, low-gel extrusion grade of ABS (Acrylonitrile Butadiene Styrene). It is used for blending with other Lustran® ABS vi..
Tensile Modulus 2.20 GPa
319 ksi
ASTM-D638
Ineos ABS Lustran® 633 ABS, Injection Molding Grade
Lustran® ABS 633 is a general-purpose injection molding grade of ABS (Acrylonitrile Butadiene Styrene). It offers a good balance of physical properties, high gloss, and good moldability. Typical ..
Tensile Modulus 2.20 GPa
319 ksi
ISO 527-1/-2
Mitsubishi Xantar® C CM 406 FD C CM 406 Polycarbonate/ABS Blend (European Grade)
Xantar® materials are engineered for performance, consistency and reliability. This makes Xantar® resins ideal for interior automotive components, electrical equipment and consumer appliances ..
Tensile Modulus 2.20 GPa
319 ksi
ISO 527-1/-2
Mitsubishi Xantar® C CM 406 FD Polycarbonate/ABS Blend
Xantar® materials are engineered for performance, consistency and reliability. This makes Xantar® resins ideal for interior automotive components, electrical equipment and consumer appliances ..
Tensile Modulus 2.20 GPa
319 ksi
1 mm/min; ISO 527
SABIC Innovative Plastics NORYL RN0401 PPE+PS
Noryl RN0401 resin is an unfilled Post Consumer Recycle (PCR) based injection moldable modified polyphenylene ether blend comprising at least 20% PCR content. Available in black only.
Tensile Modulus 2.20 GPa
319 ksi
50 mm/min; ASTM D638
SABIC Innovative Plastics LNP LUBRICOMP KP004A Acetal Homopolymer
LNP* LUBRICOMP* KP004A is a compound based on Acetal Homopolymer resin containing 20% PTFE/Silicone. Added feature of this material is: Wear Resistant.
Tensile Modulus 2.20 GPa
319 ksi
1 mm/min; ISO 527
SABIC Innovative Plastics Valox® 357 PBT+PC
PC/PBT, Unreinforced, impact modified, UL94V-0 rated. Applications like bobbins, switches and enclosures.
Tensile Modulus 2.20 GPa
319 ksi
1 mm/min; ISO 527
SABIC Innovative Plastics Valox® 357X PBT (Europe-Africa-Middle East)
VALOX 357X is an impact modified, flame retarted PBT+PC blend. Applications like bobbins, switches and enclosures.
Tensile Modulus 2.20 GPa
319 ksi
ISO 527-1/-2
Styrolution Polystyrol 454 C GR 2 PS
Description: Polystyrol 454 C is an impact resistant polystyrene with a good balance of toughness, high flow, heat resistance and high gloss.Applications: TV-front panels and back covers, VCR fronts..
Tensile Modulus 2.20 GPa
319 ksi
5 mm/min; ASTM D638
Samsung Cheil Industries Starex® SR-0330M ABS, Unreinforced Heat Resistant
Information provided by Samsung Cheil Industries.
Tensile Modulus 2.20 GPa
319 ksi
ISO R 527
Styron Pulse® A35-105 PC/ABS
PULSEâ„¢ A35-105 engineering resins give exceptional impact strength even at low temperatures and have high heat distortion temperature.Information provided by DowThis product line was spun off f..
Tensile Modulus 2.20 GPa
319 ksi
1 mm/min; ISO 527
SABIC Innovative Plastics NORYL GTX GTX902E PPE+PA (Europe-Africa-Middle East)
NORYL GTX902E is a low cost GTX grade especially developed for automotive (wheel)trims.
Tensile Modulus 2.20 GPa
319 ksi
50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL GTX GTX973 PPE+PA (Europe-Africa-Middle East)
NORYL GTX973 is a material especially designed for electrostatic painting and powder coating applications. The material combines high heat resistance with impact and conductivity in a unique way.
Tensile Modulus 2.20 GPa
319 ksi
1 mm/min; ISO 527
SABIC Innovative Plastics NORYL N110S PPE+HIPS (Europe-Africa-Middle East)
NORYL N110S is an unfilled material with a Vicat B/120 of 115 ?C according ISO 306. NORYL N110S cust spec 1977 has been listed for potable water
Tensile Modulus 2.20 GPa
319 ksi
ASTM-D790
Polyram RamLloy PBB104 PC/ABS alloy, Injection Molding
PC/ABS alloy for injection molding applicationsInformation provided by Polyram Ram On Ind.
Tensile Modulus 2.20 GPa
319 ksi
ASTM D638
Total PSI 2451 High Heat Resistance Impact Polystyrene
Total Petrochemicals Polystyrene 2451 is a high heat resistance, impact polystyrene for injection blow molding, thermoforming. It is recommended for the manufacturing of articles which require good..
Tensile Modulus 2.20 GPa
319 ksi
dry; ISO 527-1/-2
EMS-Grivory Grivory® L 20 LF grey PA12
Product Description: Grilamid L 20 LF grey is a medium viscosity graphite filled Polyamide 12 (PA12) grade suitable for both injection molding and extrusion applications. Grilamid L 20 LF grey has b..
Tensile Modulus 2.20 GPa
319 ksi
Covestro Makrolon® KU 1-1242 Polycarbonate, High Impact
High viscosity, impact modified grade with good toughness at low temperatures (light colors only).Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer..
Tensile Modulus 2.20 GPa
319 ksi
1 mm/min
Arkema Group Rilsan® AESN G9 T6L Nylon 12, Graphite Filled (Conditioned)
Designation ISO 1874-PA12,EHLS,22-010,CD10Rigid grade with graphite fillers for extrusion. Available color: steel gray. Reinforced light and heat stabilizing agents.Very low friction coefficient. No..
Tensile Modulus 2.20 GPa
319 ksi
ASTM D638
Aclo Accutech Polypropylene Homopolymer HP0339C40L Calcium Reinforced
Tensile Modulus 2.20 GPa
319 ksi
ASTM D638
Aclo Accutech Polypropylene Homopolymer HP0339W20L Wollastonite Reinforced
Tensile Modulus 2.20 GPa
319 ksi
ISO 527-1/-2
Covestro Makroblend® DP 6015 Polycarbonate + PBT
Developmental product(PC+PBT)-blendimpact modifiedeasy releaseinjection molding grade. Makroblend DP 6015* provides an outstanding balance of low-temperature impact strength and excellent chemical ..
Tensile Modulus 2.20 GPa
319 ksi
1mm/min; ISO 527
BASF Ultramid® C33 01 PA66/6 (Dry)
Ultramid C33 01 is an intermediate viscosity PA6/66 grade. Its lower melting point than standard PA6 is advantageous for coextrusion with temperature sensitive polymers like EVOH. It conforms to F..
Tensile Modulus 2.20 GPa
319 ksi
1 mm/min; ISO 527
SABIC Innovative Plastics Noryl FXN119LG PPE+HIPS (Europe-Africa-Middle East)
Noryl FXN119LG is a low gloss PPE/HIPS grade. It provides a balance of mechanical properties and heat performance with intrinsic low gloss appreance. FXN119LG is available in mutliple colors.This da..
Tensile Modulus 2.20 GPa
319 ksi
ISO 527
Polyram RamOfin PPH343T4BK11 Polypropylene, 20% Mineral Filled
20% Mineral filled, UV stabilized, heat resistant polypropylene for injection molding applications.Information provided by Polyram.
Tensile Modulus 2.20 GPa
319 ksi
1 mm/min
Polimeri Europa SINKRAL C443 ABS, Heat Stabilized  (discontinued **)
Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,105-08-25-20 Medium heat injection moulding grade. The availability of different industrial processes to manufa..
Copyright © lookpolymers.com All Rights Reserved