- HOME
- POLYMER SEARCH
- Thermoplastic
- ASA Polymer
- Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded
- Polyram RamShine PAS702 ASA, UV Stabilized
Polyram RamShine PAS702 ASA, UV Stabilized
| Category | Polymer , Thermoplastic , ASA Polymer , Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded |
| Manufacturer | Polyram |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram RamShine PAS702 ASA, UV Stabilized.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
UV stabilized, general purpose, injection molding ASA.Information provided by Polyram.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage | 0.0050 cm/cm | 0.0050 in/in | ISO 2577 |
| Melt Flow | 25 g/10 min @Load 10.0 kg, Temperature 220 °C |
25 g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 45.0 MPa | 6530 psi | ISO 527 |
| Elongation at Break | 60 % | 60 % | ISO 527 |
| Tensile Modulus | 2.20 GPa | 319 ksi | ISO 527 |
| Flexural Strength | 70.0 MPa | 10200 psi | ISO 178 |
| Flexural Modulus | 2.00 GPa | 290 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 10.0 kJ/m² | 4.76 ft-lb/in² | ISO 180 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | ISO 75 |
| Deflection Temperature at 1.8 MPa (264 psi) | 96.0 °C | 205 °F | ISO 75 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | IEC 60093 |
Users viewing this material also viewed the following:
- Global TPO-28T Talc Filled TPO Grade
- LyondellBasell Hifaxâ„¢ AB220GC/1 Thermoplastic Olefin Resin
- Teknor Apex Telcar® TL EF-6177B-UV Thermoplastic Elastomer
- Unipetrol PE HD LITEN® BB 75 HDPE
- Wellman Wellamid® GF10-42LI4-N-Gray 10% Glass Reinforced, Toughened Nylon 6
- Total Lotrene® Q1018H Linear Low Density Polyethylene, Blown Film
- CoorsTek ACI-Co6 Tungsten Carbide
- Elgiloy® Co-Cr-Ni Alloy, Wire, 47% Cold Reduction (Coil Spring Range)
- Akro-Plastic Akromid® T1 GF 30 (3466) PPA Conditioned, 30% Glass Filled
- BASF Nypel® 6030G HS DB BK 5830 30% Glass Filled PA6 (Dry)
Copyright © lookpolymers.com All Rights Reserved