Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Modulus | 1.70 GPa | 247 ksi | ASTM D638 |
Plaskolite Duraplex® SG-10 Sign Grade Acrylic Sheet, Impact Modified Available in unlimited lengths - no seams in finished products.Data provided by the manufacturer, Plaskolite, Inc. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | 1 mm/min; ISO 527 |
Polimeri Europa Edistir SR 550 Polystyrene High impact, easy flow polystyrene with good elasticity at low temperatures.Suitable for injection moulding of large or complex parts with low thickness and high impact strength.
Designation: Thermo.. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ISO.527 DIN.53455 |
Omnia Plastica Omniamid PA 6 - Akulon 6 - at 50% RH Semi-crystalline polymer of polyamide obtained by the polymerisation of the caprolactam. Its large popularity is due to both its good overall features as well as its cost-performance relationship. T.. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ASTM D638 |
NCMT NanoPAC™ HS402 High Performance Polypropylene Nanocomposite Applications: Electrical AppliancesInformation provided by Nano Composite Materials Technology Limited |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | 50 mm/min; ASTM D638 |
Ovation Polymers OPTRENE 10GF Polypropylene, 10% Glass Reinforced Properties of chemically coupled glass reinforced (10 %) polypropylene with high strength and HDT. *All properties are measured after 48 hours of conditioning at 23°C and 50% relative humidity. All.. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | 1 mm/min |
Arkema Group Oroglas® DRT Acrylic, Impact Grade
(discontinued **) For extrusion and injection molding applications. OROGLAS DRT combines good thermal resistance with an excellent impact resistance.Key features : impact resistance: up to 10 times more impact-resis.. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | 1 mm/min |
Arkema Group Oroglas® HFI-10 Acrylic, Impact Grade
(discontinued **) OROGLAS HFI-10 is an impact grade that in addition to its superior impact resistance provides an improvement in flow which contribute to improve molding behavior and reduce cycle time.Key features :.. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ASTM D638 |
Ineos ABS Centrex® 401 AES Extrusion
(discontinued **) Properties tested in transverse direction (worst case) on 125-mil (3.2 mm) extruded sheets specimens with |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ISO 527-1/-2 |
Lanxess Pocan® S 1506 901510 PBT PBT, injection molding grade, non-reinforced, elastomer-modified, high impact strength, even at low temperatures |
|||
Tensile Modulus | 1.70 - 2.50 GPa @Thickness 2.00 mm |
247 - 363 ksi @Thickness 0.0787 in |
1.0 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 6012 Polyvinylidene Fluoride (PVDF) Solef® 6012 PVDF homopolymer is a high-viscosity PVDF resin and is typically processed by extrusion or compression molding.Features: High Viscosity; HomopolymerAdditional Properties: Crystallizat.. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | 1 mm/min; ISO 527 |
SABIC Innovative Plastics Xenoy® EXXY0113 PBT (Europe-Africa-Middle East) Blow Moldable Impact modified XENOYThis data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ISO 527-1/-2 |
Suzhou Hipro Polymers Hiprolon® 90 NN Nylon 612, condition Hiprolon® 90 NN is medium viscosity polyamide 6.12. Features: low density, low water absorption, high dimension stability, high impact and notched impact resistance, good chemical resistance and .. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ISO 527-2 |
Total PPH 11012 Polypropylene Homopolymer, Injection Molding Polypropylene PPH 11012 is a nucleated controlled-rheology antistatic homopolymer with a high melt flow index of 55 g/10 min.Polypropylene PPH 11012 is characterized by high fluidity for high speed .. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ISO 527-1, 2 |
Polyplastics Duracon® SF-15 Acetal Co-polymer (POM), High impact, Flexible DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O).. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ASTM-D790 |
Polyram RamShine PS503 Polystyrene, Flame Retardant Flame retardant, high impact polystyrene for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ISO 527-1/-2 |
DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Cond) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier .. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | cond; ISO 527-1/-2 |
DSM Novamid® 1010C2 PA6 Easy Molding Grade |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | chs 2.0 in/min; ASTM D638 |
Diamond Polymers Centrex® 825 Sheet Extrusion Grade Centrex 825 resin is a high-gloss, high-impact grade of ASA (acrylonitrile-styrene-acrylate) with good resistance to weather aging. It has good melt strength for extrusion and thermoforming, and it .. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | 50%RH; ISO 527-1/-2 |
DuPont Performance Polymers Zytel® 151L NC010 Nylon 612
(Unverified Data**) Unreinforced Polyamide 612Information provided by DuPont Performance Polymers |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | XY; ASTM D638 |
ALM PA 606-FR Filled Nylon 12 Prototyping Polymer Only commercially available fire retardant nylon 12 material, which meets FAR 25.853 60 second burn specification.The parts produced from PA 606-FR have a much smoother surface finish and sharper fe.. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | |
BASF Novolen® 1148 UC Polypropylene Nucleated grade with antistatic agent for injection molded parts.Data was collected by ISO methods and provided by BASF. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ISO 527 |
Polyram RamLloy PVB702 Nylon/ABS Alloy, Impact Modified Impact modified, UV stabilized Nylon/ABS alloy for injection molding applications.Information provided by Polyram. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | ISO 527 |
Polyram RamOfin PPC343T4 Polypropylene, 20% Mineral Filled 20% Mineral filled, UV stabilized, heat stabilized polypropylene for injection molding applications.Information provided by Polyram. |
|||
Tensile Modulus | 1.70 GPa | 247 ksi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® BM-30/2 PA6-MD30 Product description: Grilon BM-30/2 is a 30% mineral reinforced PA6 injection molding grade. Grilon BM-30/2 has the following important properties: Iow warpageImpact resistantIsotropic shrinkage App.. |