Arkema Group Oroglas® HFI-10 Acrylic, Impact Grade (discontinued **)

Category	Polymer , Thermoplastic , Acrylic (PMMA) , Acrylic, Impact Modified, Molded
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Arkema Group Oroglas® HFI-10 Acrylic, Impact Grade (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

OROGLAS HFI-10 is an impact grade that in addition to its superior impact resistance provides an improvement in flow which contribute to improve molding behavior and reduce cycle time.Key features : impact resistance: up to 10 times more impact-resistant than standard acrylic easy processing: flow significantly improved which contribute to reduce cycle time by 20 %. ( MFI, 230°c/3.8 kg ) = 3 gr / 10 min ( MVI, 230°c/3.8 kg ) = 2.8 ml / 10 min excellent optical properties with low edge color UV stability Typical applications : OROGLAS HFI-10 can be injection molded or extruded in any type of machine Typical applications are in the fields of: building, lighting, appliances, information technology, and business machines. OROGLAS HFI-10 is recommended when toughness and increased flow are required.ISO data provided by the manufacturer, Arkema.Arkema, formed in 2004, was formerly Atofina Chemicals and before that Elf Atochem.

Physical Properties	Metric	English	Comments
Density	1.15 g/cc	0.0415 lb/in³
Water Absorption	2.0 %	2.0 %
Moisture Absorption at Equilibrium	0.36 %	0.36 %	Humidity Absorption
Melt Flow	2.8 g/10 min @Load 3.80 kg, Temperature 230 °C	2.8 g/10 min @Load 8.38 lb, Temperature 446 °F

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	42.0 MPa	6090 psi	50 mm/min
Elongation at Break	30 %	30 %	Nominal Strain; 50 mm/min
Elongation at Yield	5.0 %	5.0 %	50 mm/min
Tensile Modulus	1.70 GPa	247 ksi	1 mm/min
Charpy Impact Unnotched	6.00 J/cm²	28.6 ft-lb/in²
Charpy Impact, Notched	0.600 J/cm²	2.86 ft-lb/in²
Tensile Creep Modulus, 1 hour	1400 MPa	203000 psi
Tensile Creep Modulus, 1000 hours	1000 MPa	145000 psi

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	100 µm/m-°C @Temperature 20.0 °C	55.6 µin/in-°F @Temperature 68.0 °F
Deflection Temperature at 0.46 MPa (66 psi)	85.0 °C	185 °F
Deflection Temperature at 1.8 MPa (264 psi)	81.0 °C	178 °F
Vicat Softening Point	84.0 °C	183 °F	50°C/hr; 50N
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in

Optical Properties	Metric	English	Comments
Transmission, Visible	80 %	80 %	Mfr. reports 'Transparent' but doesn't quantify.

Electrical Properties	Metric	English
Electrical Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Dielectric Constant	3.2 @Frequency 1e+6 Hz	3.2 @Frequency 1e+6 Hz
	3.9 @Frequency 100 Hz	3.9 @Frequency 100 Hz
Dielectric Strength	15.0 kV/mm	381 kV/in
Dissipation Factor	0.040 @Frequency 1e+6 Hz	0.040 @Frequency 1e+6 Hz
	0.050 @Frequency 100 Hz	0.050 @Frequency 100 Hz
Comparative Tracking Index	600 V	600 V

Users viewing this material also viewed the following: