- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength at Break = 5220 psi
Polymer Property : Tensile Strength at Break = 5220 psi Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 36.0 MPa | 5220 psi | Type I, 5 mm/min; ASTM D638 |
| SABIC Innovative Plastics Cycolac® MG38U ABS High impact ABS. UL 746C f1 listed. Toughness/rigidity. Good fatigue resistance. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | 50 mm/min; ISO 527 |
| SABIC Innovative Plastics Geloy FXTW26SK ASA Next generation Geloy XTW ASA for high heat exterior applications. Outstanding weatherability and toughness. Metallic sparkle VisualFx.This data was supplied by SABIC-IP for the Americas region. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | Type I, 5 mm/min; ASTM D 638 |
| SABIC Innovative Plastics Geloy FXTW26SK ASA (Asia Pacific) Next generation Geloy XTW ASA for high heat exterior applications. Outstanding weatherability and toughness. Metallic sparkle VisualFx.This data was supplied by SABIC-IP for the Asia Pacific region... |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | 50 mm/min; ISO 527 |
| SABIC Innovative Plastics Geloy FXTW26SK ASA (Asia Pacific) Next generation Geloy XTW ASA for high heat exterior applications. Outstanding weatherability and toughness. Metallic sparkle VisualFx.This data was supplied by SABIC-IP for the Asia Pacific region... |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ISO 527-2 |
| Total Lacqrene® 2551 Medium Impact Polystyrene
(discontinued **) LACQRENE® 2551 is a high heat resistance, medium impact polystyrene for injection molding. The very high Vicat Softening Point of this grade gives moldings of high rigidity and a good dimensional .. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ISO R 527 |
| Fainplast Compounds RE 425 Rigid PVC, Extrusion Electric channels |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ISO R 527 |
| Fainplast Compounds RH 325 Rigid PVC, Antishock Extrusion Antishock furniture profiles |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ASTM D638 |
| LG Chemical LUCEL HI-525 High Impact POM, Unreinforced LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ASTM D638 |
| LG Chemical LUCEL ST-550 Ultra High Impact POM, Unreinforced LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | 50 mm/min; ASTM D638 |
| Lavergne VYTEEN ABS 2904 Acrylonitrile Butadiene Styrene Vyteen ABS 2904 is a black recycled ABS high impact flow terpolymer with balanced impact/stiffness properties designed for injection molding applications.Features: -Excellent resilience -Good proc.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | after 7days @136°C; UL 1581 |
| SABIC Innovative Plastics NORYL WCA105 PPE-TPE Flexible, non-halogenated FR mPPE extrusion grade ideal for evaluation in applications such as wire insulation. Flame retardant performance capable of meeting VW1 and 105C temperature rating requir.. |
|||
| Tensile Strength at Break | 36.0 MPa @Temperature 23.0 °C |
5220 psi @Temperature 73.4 °F |
50mm/min; ISO 527-2/1A/50 |
| SYNTHOS Forsan® 483 Acrylonitrile Butadiene Styrene (ABS) High heat resistant, high gloss.Applications: Electrotechnics, lighting equipment, automotiveHousehold appliances, electric switches, lamps, car interior parts, etc.Synthos was formerly known as Kau.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ASTM D638 |
| SABIC Innovative Plastics LNP STAT-KON WS002I PBT (Asia Pacific) LNP* Stat-kon* WS002I is a compound based on Polybutylene Terephalate resin containing Stainless Steel. Added features of this material include: Electrically Conductive, High Impact. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | 0.2 in/min; ASTM Test |
| Styrolution Terblend® N NM-19 ABS/PA6 (Dry) Terblend N NM-19 is a UV stabilized ABS/PA6 blend combining very high impact strength, even at low temperatures with an excellent processability and surface appearance.Information provided by STYROL.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | Type I, 5 mm/min; ASTM D638 |
| SABIC Innovative Plastics LNP THERMOCOMP WX05505 PBT LNP* Thermocomp* WX05505 is a compound based on Thermoplastic Polyester (PBT) resin containing proprietary fillers. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ISO 527 |
| SABIC Innovative Plastics LNP LUBRICOMP WBL36L PBT LNP* LUBRICOMP* WBL36L is a compound based on PBT resin containing 30% Glass Bead, 15% PTFE. Added features of this material include: Wear Resistant, Low Extractible. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ISO 527 |
| SABIC Innovative Plastics LNP LUBRICOMP WBL36L PBT (Asia Pacific) LNP* Lubricomp* WBL36L is a compound based on Polybutylene Terephalate resin containing Glass Bead, PTFE. Added features of this material include: Internally Lubricated, Low Extractible. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ISO 527 |
| SABIC Innovative Plastics LNP STAT-LOY K3000SZ Acetal Copoly LNP* STAT-LOY* K3000SZ is a compound based on Acetal Copolymer resin. Added feature of this material is: AntiSstatic. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ISO 527 |
| SABIC Innovative Plastics LNP STAT-LOY K3000Z Acetal LNP* STAT-LOY* K3000Z is a compound based on unfilled Acetal resin. Added feature of this material is: Antistat. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | Type I, 5 mm/min; ASTM D638 |
| SABIC Innovative Plastics LNP THERMOCOMP MC002 PP LNP* THERMOCOMP* MC002 is a compound based on Polypropylene resin containing 10% Carbon Fiber. Added feature of this material is: Electrically Conductive. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | Crosshead speed 100 mm/min; ISO 527 |
| SCG Chemicals EL-Leneâ„¢ H1000PYL High Density Polyethylene Pipe Resin Key Characteristics: Good processing, high thermal stability, good resistance to weatheringRecommended Applications: Stripe lines for PE100 pipe, non pressure pipesCertification: Certified by LNE.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ISO R 527 |
| Fainplast Compounds R 316/AS Rigid PVC, Extrusion Antistatic profiles |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ASTM-D638 |
| Braskem GD5160 HDPE Blow Molding Polyethylene Homopolymer GD5160 is a high-density polyethylene homopolymer with high density and stiffness combined with high impact resistance and productivity. It was developed for the blow-molding segment. It is used in .. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ASTM-D638 |
| Braskem GM5010T2B HDPE High Density Extrusion Polyethylene GM5010T2B is a high-density polyethylene compound specially developed for the manufacturing of extruded pipes for water distribution. It is produced with bimodal technology and has high molar mass. .. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ASTM-D638 |
| Braskem GP100OR HDPE High Density Extrusion Polyethylene GP100OR is a high-density polyethylene compound specially developed for the manufacturing of extruded pipes for gas distribution. It is produced with bimodal technology and has high molar mass. It s.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | |
| AorTech Biomaterials ECSil™ 60D Biomedical Carbonate Silicone Pellets Elast-Eon™ Carbonate Silicone (ECSil™) is a family of next generation biomedical polymers. ECSil™ is finding strong interest in cardiac pacing leads, orthopaedics, spinal discs, and generally an.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ASTM D638 |
| Asahi Glass Fluon® P-805UP PFA Perfluoropolymer Fluon® PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent character.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | |
| AorTech Biomaterials ECSil™ 60D Biomedical Carbonate Silicone Pellets Elast-Eon™ Carbonate Silicone (ECSil™) is a family of next generation biomedical polymers. ECSil™ is finding strong interest in cardiac pacing leads, orthopaedics, spinal discs, and generally an.. |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | 5 mm/min; ISO 527 |
| SABIC Innovative Plastics Cycolac® DL100LG ABS (Europe-Africa-Middle East) Cycolac DL100LG is a low gloss, high heat, high impact ABS/PC blend with low emission |
|||
| Tensile Strength at Break | 36.0 MPa | 5220 psi | ASTM D638 |
| Arkema Group Pebax® MX 1205 Polyether Block Amide (PEBA) Typical application: Impact modifierInformation provided by Arkema Group |
|||
Copyright © lookpolymers.com All Rights Reserved