Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
Plaskolite Optix® PL-25 Acrylic Resin Extrusion grade pellets. Highest molecular weight and heat resistance of Optix® line.Data provided by the manufacturer, Plaskolite, Inc. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
Nylene® 400 Nylon 6, Extrusion Grade Film Grade. Extrusion grade. Nylene 400 is a very low viscosity, extrusion grade nylon 6 resin suitable for specialty fibers. Also, the low viscosity allows for ease of mixing in compounding appli.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
Nylene® 451 Nylon 6 Dry as molded. Injection molding grade. Nylene 451 is recommended for molding applications requiring both maximum durability and toughness. Exceptional fatigue and wear resistance insure long produ.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ISO 180/A |
Polimeri Europa Eraclene® MS 80 U High Density Polyethylene - Injection Molding Eraclene MS 80 U is a gas phase high density polyethylene resin (HDPE) with antioxidants, suitable for injection molding application. This grade has a narrow molecular weight distribution and a hig.. |
|||
Izod Impact, Notched | >= 0.400 J/cm @Temperature -20.0 °C |
>= 0.749 ft-lb/in @Temperature -4.00 °F |
ASTM D256 |
NIZHNEKAMSKNEFTEKHIM PP 4132B (PA14D) Propylene and Ethylene Copolymer Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates very high long-term thermal stability, thermal-oxidative degradation r.. |
|||
Izod Impact, Notched | 0.400 - 0.500 J/cm @Temperature -30.0 - 0.000 °C |
0.749 - 0.937 ft-lb/in @Temperature -22.0 - 32.0 °F |
Average value: 0.475 J/cm Grade Count:1 |
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled". Specific grades with glass content betwe.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
Reliance Industries Repol H030SG Polypropylene REPOL Polypropylene H030SG is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
Flint Hills P4G3B-146 Polypropylene Homopolymer Features: Nucleated and Antistat. Product does not contain animal derived components. Phthalate-free.Applications: Injection molding: general purposeInformation Provided by Flint Hills Resources |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
LG Chemical Lupox® SV-1120 General Purpose PBT, Unreinforced, High Molecular Weight, Extrusion LUPOX semi-crystalline thermoplastic PBT resins exhibit properties including high strength, rigidity and good resistance to fatigue and creep at elevated temperatures. Furthermore, LUPOX resins sho.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature -20.0 °C |
0.749 ft-lb/in @Temperature -4.00 °F |
ASTM D256-03 |
Ipiranga Petrochem PCC 2314 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
Izod Impact, Notched | 0.400 - 0.450 J/cm | 0.749 - 0.843 ft-lb/in | ASTM D256 |
Loxim 810 02T HB Polypropylene Compound, 10% Talc Filled, Flame Retardant Information provided by Loxim Industries |
|||
Izod Impact, Notched | 0.400 - 0.500 J/cm | 0.749 - 0.937 ft-lb/in | ASTM D256 |
Loxim 820 12 HB Polypropylene Compound, Flame Retardant Information provided by Loxim Industries |
|||
Izod Impact, Notched | 0.400 - 0.500 J/cm | 0.749 - 0.937 ft-lb/in | ASTM D256 |
Loxim 810 01 HB Polypropylene Compound, Flame Retardant Information provided by Loxim Industries |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature -20.0 °C |
0.749 ft-lb/in @Temperature -4.00 °F |
ASTM D256 |
Spartech Royalite R632M Carbon Black Filled ABS/PVC Resin Data provided by the manufacturer. This static-conductive material is UL®-listed and meets minimum static-decay requirements outlined in MIL-B-1705B and NFPA Code 56A specifications. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
SPS Guang Zhou PONYLâ„¢ EP4003G10 Non-halogen flame retardance/GF10%-PA66 Characteristic: Good flame retardance, high mechanical properties, superior heat resistance, good dimensional stabilityApplications: E/E partsInformation Provided by SPS (Guang Zhou) Ltd. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics Valox® ENH3500 PBT (Europe-Africa-Middle East) Unfilled PBT, Non-Brominated & Non-Chlorinated Flame Retardant |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
A. Schulman POLYFORT™ FPP 4020 20% Mineral-Filled Polypropylene DescriptionPolyfort® FPP 4020 is a 20% mineral-filled polypropylene designed for use when improved heat resistance and high stiffness is needed.Information provided by A. Schulman. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ISO 180 |
Wellman Wellamid® GS40-60 42LH-N 40% Glass Sphere Filled Nylon 6, Lubricated & Heat Stabilized Typical Applications: Potentiometer liners, electrical coil forms, automotive window lift and power door lock switch bodies, gears, thick wall section moldings, emission control valves.Data provided.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
A. Schulman POLYFORT™ FPP 3707 CAC03 Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 3707 is a 20% CAC03 filled homopolymer polypropylene product.Information provided by A. Schulman. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature -40.0 °C |
0.749 ft-lb/in @Temperature -40.0 °F |
ASTM D256 |
Eastman Eastman AP006 Copolyester Applications:Automotive componentsBreathable filmsElectrical/electronic componentsFilm ModificationFlexible hingesHose mandrelIndustrial componentsIndustrial hoses/beltsOffice furniturePackagingPoly.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature -40.0 °C |
0.749 ft-lb/in @Temperature -40.0 °F |
ASTM D256 |
Eastman Eastman AP007 Copolyester Applications:Automotive componentsBreathable filmsElectronic componentsFilm ModificationFlexible hingesHose mandrelIndustrial componentsOffice furniturePackagingPolymer modificationProfilesRubber an.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
E-Polymers TEKAMID® TB120L NCR , High Crystallinity PA6, DAM Precise injection, high crystallinityInformation provided by E-Polymers Co. Ltd. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | |
Abatron AboCast 8-3/Abocure 8-3 Epoxy 2-part solvent-free dielectric epoxy casting compound.Processing: 100/50 ratio (pbw); Gel time, 100 g (3.5 oz.): 265 minutes; cures in 16 hours at 25°C (77°F); postcure: 2 hours at 100°C (212°F).. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
Cast Nylons Nycast® 6PA-Natural Nylon 6, Food Grade NYCAST® 6 PA-Natural along with NYCAST® 6 PA-Blue are two of the most widely used cast nylons in industry. Nylons have replaced bronze, brass, steel, and aluminum in various mechanical applicatio.. |
|||
Izod Impact, Notched | 0.400 J/cm @Thickness 3.20 mm |
0.749 ft-lb/in @Thickness 0.126 in |
ASTM D256 |
Beijing Chemical Industry KAIFA® 301-G10 PBT Resin 10% glass fiber reinforced, flame retardantInformation provided by Beijing Chemical Industry Research Institute (Group) |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature -40.0 °C |
0.749 ft-lb/in @Temperature -40.0 °F |
ASTM Test |
BASF Ultramid® B3GM35 BKQ642 23220 15/25% Glass/Mineral Filled PA6 (Dry) Ultramid B3GM35 BKQ642 23220 is a 40% combined glass-fiber and mineral reinforced, pigmented black injection molding PA6 grade. |
|||
Izod Impact, Notched | 0.400 J/cm @Thickness 3.20 mm |
0.749 ft-lb/in @Thickness 0.126 in |
ASTM D256 |
Beijing Chemical Industry KAIFA® HN201-G30 PA6 Resin 30% glass fiber reinforced, thermal resistantInformation provided by Beijing Chemical Industry Research Institute (Group) |
|||
Izod Impact, Notched | 0.400 J/cm @Thickness 3.17 mm |
0.749 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
Chevron Phillips K-Resin® BK11 Styrene-Butadiene Copolymer, Injection Molding Grade
(discontinued **) Styrene-Butadiene CopolymerCustomer Benefits: BK11 is an SBC consisting of KR03 grade with a mold release added of easier processing. BK11 molded parts give excellent detail on fast production cycl.. |
|||
Izod Impact, Notched | 0.400 - 0.450 J/cm @Temperature -40.0 - -20.0 °C |
0.749 - 0.843 ft-lb/in @Temperature -40.0 - -4.00 °F |
Average value: 0.425 J/cm Grade Count:1 |
Overview of materials for Polypropylene with Glass Fiber + Bead Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with Glass Fiber + Bead Filler". Each property range of values reported is minimum and max.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
Loxim 400 00HB Nylon 6,6 Information provided by Loxim Industries |