Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
Nylene® 401D, Nylon 6 Injection molding grade. Dry as molded. Nylene 401D is a specially formulated nylon 6 molding resin possessing outstanding flow characteristics. Nylene 401D is ideally suited for applications requi.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
NHEP Spectron™ E6126 Nylon 66, 20% Glass Fiber Natural color. E6126 exhibits high rigidity, mechanical strength, and excellent appearance. It is suitable for wide range of applications.Property data measured at room temperature, 50% RH.Informati.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
Reliance Industries Repol H020EG Polypropylene REPOL Polypropylene H020EG is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Izod Impact, Notched | 0.400 J/cm @Thickness 3.18 mm, Temperature 23.0 °C |
0.749 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Compression Molded; ASTM D256 |
PolyOne Geon™ L4605 Red 7640 Polyvinyl Chloride, Semi-Rigid (PVC, Semi-Rigid) Information provided by PolyOne |
|||
Izod Impact, Notched | 0.400 - 0.600 J/cm @Temperature -40.0 - 0.000 °C |
0.749 - 1.12 ft-lb/in @Temperature -40.0 - 32.0 °F |
Average value: 0.475 J/cm Grade Count:3 |
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled". Specific grades with glass content betwe.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
LATI LATAN 13 S/30 30% Glass Sphere Reinforced Polyoxymethylene Copolymer (POM)
(Unverified Data**) Description: Latan series thermoplastics are polyoxymethylene copolymer (POM) products. The main applications for Latan feature good wear resistance, chemical inertness and low water absorption (gea.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.750 ft-lb/in | |
Reliance Industries Polypropylene - Calcium carbonate filled Information provided by Reliance Industries |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
Reliance Industries Repol H029SG Polypropylene REPOL Polypropylene H029SG is being manufactured using Unipol PP process, which combines the production efficiency of gas phase fluidized bed reactor with the high activity stereospecific catalyst s.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature -29.0 °C |
0.749 ft-lb/in @Temperature -20.2 °F |
ASTM D256 |
Global POM-270 Low Melt Acetal Information provided by Global Polymers Corporation. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
Kostat 7440 Conductive ABS Compound KOSTAT 7440 is a conductive thermoplastic compound based on Acrylonitrile Butadiene Styrene and a special carbon black. KOSTAT 7440 is not dependant on atmospheric conditions and is used for ESD in.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
LG Chemical Lupox® SV-1120 General Purpose PBT, Unreinforced, High Molecular Weight, Extrusion LUPOX semi-crystalline thermoplastic PBT resins exhibit properties including high strength, rigidity and good resistance to fatigue and creep at elevated temperatures. Furthermore, LUPOX resins sho.. |
|||
Izod Impact, Notched | 0.400 - 0.450 J/cm | 0.749 - 0.843 ft-lb/in | ASTM D256 |
Loxim 810 02T HB Polypropylene Compound, 10% Talc Filled, Flame Retardant Information provided by Loxim Industries |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
LG Chemical LUPOL GP-3152F General Purpose Polypropylene, 15% Mineral Fillers, High Impact, Flame Retardant LUPOL resins, based on polyolefin with a wide range of characteristics, are a family of low cost engineering plastics.Applications: Automotive: Bumper cover, instrument panel, glove box, air cleaner.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature -20.0 °C |
0.749 ft-lb/in @Temperature -4.00 °F |
ASTM D256 |
Spartech Royalite R61M Low Smoke Resin Data provided by the manufacturer. Formulated to meet smoke and fire specifications recommended by the FTA, this is ideally suited for mass transit applications such as seat backs, overhead storage.. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature -30.0 °C |
0.749 ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
SABIC Innovative Plastics NORYL GTX GTX985 PPE+PA66 NORYL GTX985 is a 18% mineral filled material. This material combines high stiffness and excellent temperature resistance with conductivity for electrostatic painting. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
Polyram PlusTek PB150 Nylon 6, Injection Molding Fast cycle polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
Polyram PlusTek PB507 Nylon 6, Flame Retardant Flame retardant halogen free polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ISO 180 |
Wellman Wellamid® MR410 42H-N 40% Mineral Reinforced Nylon 6, Heat Stabilized Typical Applications: Lawn and garden equipment, automotive trim, bezels, wheel covers, window frames, gas tank filler housings, brackets, metalized lighting reflectors for automotive, automotive co.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ISO 180 |
Wellman Wellamid® MRGF3822-BK 38% Mineral/10% Glass Fiber Reinforced Nylon 66, Heat Stabilized Typical Applications: Lawn and garden equipment, automotive trim, bezels, wheel covers, window frames, gas tank filler housings, brackets, metalized lighting reflectors for automotive, automotive co.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
A. Schulman POLYFORT™ FPP 4020 20% Mineral-Filled Polypropylene DescriptionPolyfort® FPP 4020 is a 20% mineral-filled polypropylene designed for use when improved heat resistance and high stiffness is needed.Information provided by A. Schulman. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
A. Schulman POLYFORT™ FPP 3707 CAC03 Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 3707 is a 20% CAC03 filled homopolymer polypropylene product.Information provided by A. Schulman. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
A. Schulman POLYFORT™ FPP 4020 20% Mineral-Filled Polypropylene DescriptionPolyfort® FPP 4020 is a 20% mineral-filled polypropylene designed for use when improved heat resistance and high stiffness is needed.Information provided by A. Schulman. |
|||
Izod Impact, Notched | >= 0.400 J/cm @Temperature 23.0 °C |
>= 0.749 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
Polyram PlusTek RA300G4 Nylon 6.6, 20% Glass Fiber 20% glass fiber reinforced polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Izod Impact, Notched | 0.400 J/cm @Temperature -20.0 °C |
0.749 ft-lb/in @Temperature -4.00 °F |
ASTM D256 |
Total PPC 4720 WZ Polypropylene, Impact Copolymer ATOFINA 4720 is an impact copolymer. 4720 is characterized by a high fluidity offering a combination of east of processing and good mechanical properties.ApplicationATOFINA 4720 has been formulated.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.750 ft-lb/in | ASTM D256 |
Aclo Accutech Polypropylene Homopolymer HP0336C10L1 Calcium Reinforced |
|||
Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | ASTM D256 |
Ashley Polymers Ashlene® 935-40M Nylon 11 A rotational molding grade Nylon 11 with a 40-50 mesh.Data provided by the manufacturer |
|||
Izod Impact, Notched | 0.400 - 3.36 J/cm | 0.749 - 6.30 ft-lb/in | Average value: 1.27 J/cm Grade Count:254 |
Overview of materials for Nylon 6, 30% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, 30% Glass Fiber Filled". Specific grades with glass content between 25% and 34% are included. E.. |
|||
Izod Impact, Notched | 0.400 - 8.01 J/cm | 0.749 - 15.0 ft-lb/in | Average value: 2.40 J/cm Grade Count:9 |
Overview of materials for Nylon 11, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 11, Unreinforced". Each property range of values reported is minimum and maximum values of appropr.. |
|||
Izod Impact, Notched | 0.400 J/cm | 0.750 ft-lb/in | ASTM D256 |
PlastxWorld Veroplas PB2009L Nylon 66 general purpose, unfilled, lubricated injection molding gradeInformation provided by PlastxWorld Inc. |