Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 40.0 MPa | 5800 psi | |
Plastcom SLOVALEN PH 91 N PP, basic type FeaturesCompounded homopolymer PP. General use in all industry branches. Packing material, garden flower-pots, toys, furniture industry, guides, dowels, clamps, office chairs, holders etc. Delivered.. |
|||
Flexural Strength | <= 40.0 MPa | <= 5800 psi | ISO 178 |
Polykemi AB POLYfill PP EIP5025 F VT2 Polypropylene, Mineral Reinforced, Extrusion grade, Low CLTE Information provided by Polykemi AB |
|||
Flexural Strength | <= 40.0 MPa | <= 5800 psi | ISO 178 |
Polykemi AB POLYfill PPH GF1020 Polypropylene Homopolymer, Glass Fibre-Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
SABIC Innovative Plastics LNP COLORCOMP M1000S PP LNP COLORCOMP* M1000S is an unfilled Polypropylene resin. Added features of this material include: Heat Stabilized. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
PolyOne Maxxam™ DP-9156-5-8000 Polypropylene Copolymer (PP Copolymer) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car.. |
|||
Flexural Strength | <= 40.0 MPa | <= 5800 psi | ISO 178 |
Polykemi AB POLYfill PPC 05ENH Polypropylene Copolymer, Flame Retardant, Halogen Free Information provided by Polykemi AB |
|||
Flexural Strength | 40.0 MPa | 5800 psi | 2mm/min; ASTM D790 |
Kingfa FRHIPS-1162 Flame Retardant Polystyrene Features:UL 94 V-2 @ 1.6mm, V-2 @ 3.2mmExcellent balance properties, high strengthExcellent heat stabilityExcellent electrical propertiesApplications:Injection moldingGas moldingTV & Audio housingEl.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | 2mm/min; ASTM D790 |
Kingfa FRHIPS-960 Flame Retardant Polystyrene Features:UL 94 V-0 @ 1.6mm, V-0 @ 3.2mmExcellent balance properties, Non-DPOGood heat stabilityColor tailor-made for clientApplications:Injection moldingGas assistant moldingPrinter and photocopier .. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 A |
Metabolix Mirel™ F1005 Injection Molding Grade PHA Bioplastic Mirel F1005 is FDA cleared for use in non-alcoholic food contact applications, from frozen food storage and microwave reheating to boiling water up to 212°F. FDA clearance includes products such.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 A |
Metabolix Mirelâ„¢ P1003 Injection Molding Grade PHA Bioplastic Mirelâ„¢ P1003 is a general purpose injection molding material with high modulus.Mirel is suitable for a wide range of injection molded food service and packaging applications including caps and .. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | conditioned, 2 mm/min; ISO 178-A |
Lanxess Durethan® BC 30 S 000000 Nylon 6 PA 6, non-reinforced, injection moldingInformation provided by LANXESS. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | conditioned, 2 mm/min; ISO 178-A |
Lanxess Durethan® AC 30 DUS027 000000 Nylon 66 PA 66, non-reinforced, injection molded, impact modifiedInformation provided by LANXESS. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
Solvay TECHNYL® PSB 286 PA6, Conditioned Description: Unreinforced polyamide PA6, with very good lubrication, standard for fast injection cycles, for injection molding.Available in: North AmericaProduct Applications: This grade has high fl.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
SABIC Innovative Plastics LNP STAT-KON CD0001 PS LNP* STAT-KON* CD000I is a compound based on Polystyrene resin containing Carbon Powder. Added features of this material include: Electrically Conductive, High Impact. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
SABIC Innovative Plastics LNP STAT-KON MX01739C PP LNP* SAT-KON* MX01739C is a compound based on Polypropylene containing Proprietary Filler(s). Added features of this grade include: Electrically Conductive, Clean Compounding System. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | |
SPS Guang Zhou SAMATâ„¢ 5508(f1) Flame-retarded Polypropylene Characteristic: Good flame resistance, weather resistance, good chemical resistance, high flow propertiesApplications: X'mas decorative product, E/E applianceInformation Provided by SPS (Guang Zhou).. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
Techmer ES Plaslube® NY-6/MS/M PA12 |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
Styrolution PS 542N HIPS Styrolution PS 542N is an impact polystyrene with high heat resistance.Information provided by Styrolution |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
Styrolution Styrolux® 684 D SBC Description: Styrolux® 684 D is a clear styrene-butadiene copolymer (SBC) used in injection molding for parts with enhanced toughness as well as in sheet and film extrusion and blow molding. Part.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
SABIC Innovative Plastics LNP STAT-LOY K3000SZ Acetal Copoly LNP* STAT-LOY* K3000SZ is a compound based on Acetal Copolymer resin. Added feature of this material is: AntiSstatic. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
A. Schulman POLYFORT™ FPP 1245U CaCO3 Filled UV Stable Copolymer Polypropylene DescriptionPolyfort® FPP 1245U is a 20% CAC03 filled UV stable copolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
A. Schulman POLYFORT™ FPP 1245 CaCO3 Filled Copolymer Polypropylene DescriptionPolyfort® FPP 1245 is a 20% CAC03 filled copolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 40.0 MPa @Temperature 80.0 °C |
5800 psi @Temperature 176 °F |
ASTM D790 |
Toyobo NB-5620S Nylon/Olefin Alloy, 15% Mineral Reinforced (DAM) Features: 15% Mineral Reinforced, Light WeightInformation provided by Toyobo. |
|||
Flexural Strength | 40.0 MPa @Temperature 80.0 °C |
5800 psi @Temperature 176 °F |
ASTM D790 |
Toyobo T-661 Nylon 66, Standard Grade (Conditioned) Features: Non-reinforced, Standard GradeInformation provided by Toyobo. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
A. Schulman POLYFORT™ FXP 2779U UV Stabilized Copolymer Polypropylene DescriptionPolyfort® FXP 2779U is a 20% talc-filled, UV stabilized copolymer polypropylene.Information provided by A. Schulman. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D-790 |
Axiall Suprel® SVA 9420 Rigid PVC, Molding Georgia Gulf Suprel® SVA 9420 Alloy is engineered for injection molding applications that require outstanding impact resistance or toughness, particularly at low temperatures. This alloy complies .. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437G10CL Glass Reinforced Coupled |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437G10M20CL Glass/Mineral Reinforced Coupled |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Aclo Accutech Polypropylene Homopolymer HP0336M10L Mica Reinforced |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Total PSI 975E Polystyrene Polystyrene 975E is a high impact polystyrene designed for extrusion/thermoforming applications. The food ESCR properties of 975E dictate its use for dairy applications that are subjected to high bu.. |