Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 33.0 MPa | 4780 psi | ASTM D790 |
Ravago Manufacturing Americas Hylon® N2000HL Nylon 6 (Cond) Information provided by Ravago. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
PolyOne Geon™ Vinyl Cellular E8202 Polyvinyl Chloride, Rigid (PVC, Rigid) All physicals were measured on an actual extruded part of a shutter profile.High rate inward foam applications.Density range .55-.70.Information provided by PolyOne |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ISO 178 |
SABIC Innovative Plastics LNP COLORCOMP R1000 PA 66 LNP* COLORCOMP* R1000 is an unfilled Nylon 66. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | |
Plastcom SLOVALEN PC 93 T 20 PP, 20% mineral filling, UV stabilization FeaturesModified PP for injection moulding with the content of 20 % mineral filling, uv stabilized. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 A |
Metabolix Mirel™ F1006 Injection Molding Grade PHA Bioplastic Mirel F1006 is FDA cleared for use in non-alcoholic food contact applications, from frozen food storage and microwave reheating to boiling water up to 212°F. FDA clearance includes products such.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 A |
Metabolix Mirelâ„¢ P1004 Injection Molding Grade PHA Bioplastic Mirel P1004 is a general purpose injection molding grade with high toughness.About Mirel BioplasticsMirel is a family of bioplastic materials that have physical properties comparable to petroleum-ba.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ISO 178 |
Solvay TECHNYL® eXten D 437P PA6.10 Description: TECHNYL® eXten D 437P is a high viscosity, unfilled, plasticized, UV and heat stabilized PA6.10 for extrusion applications. Technyl® eXten D 437P is a partially biosourced materia.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM Test |
Styrolution Styrolux 656C SBC Styrolux 656C is a high flow thermoplastic injection molding styrene-butadiene block copolymer. It has crystal clarity, good toughness, good stiffness, and warpage resistance for general molding ap.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
Styrolution Styrolux® GH 58 SBC Description: Styrolux® GH 58 is a high flow thermoplastic styrene-butadiene block copolymer with excellent mold release properties. It has crystal clarity, good toughness, good stiffness and warp.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics LNP Thermocomp MH0200A PP (Europe-Africa-Middle East) LNP* Thermocomp* MH0200A is a compound based on Polypropylene resin containing High Specific Gravity Filler.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ISO 178 |
Unitika A1030FR PA6, Conditioned Information provided by Unitika Ltd. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
A. Schulman POLYFLAM™ E-15086-1B Mineral Impact Modified, Low Warp Polypropylene Black DescriptionPolyfort® E-15086-1B is a mineral impact modified low warp polypropylene black.Information provided by A. Schulman. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
A. Schulman POLYFLAM™ E-15086-1B Mineral Impact Modified, Low Warp Polypropylene Black DescriptionPolyfort® E-15086-1B is a mineral impact modified low warp polypropylene black.Information provided by A. Schulman. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
A. Schulman POLYFLAM™ E-15086-1B Mineral Impact Modified, Low Warp Polypropylene Black DescriptionPolyfort® E-15086-1B is a mineral impact modified low warp polypropylene black.Information provided by A. Schulman. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
A. Schulman POLYFLAM™ E-15086-1B Mineral Impact Modified, Low Warp Polypropylene Black DescriptionPolyfort® E-15086-1B is a mineral impact modified low warp polypropylene black.Information provided by A. Schulman. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
Entec Hypro™ PPC-CC20 Natural Copolymer Polypropylene, 20% Calcium Carbonate Filled Information provided by Entec |
|||
Flexural Strength | 33.0 MPa | 4790 psi | chs 0.05 in/min; ASTM D790 |
Diamond Polymers SBS 1001 Styrene Butadiene Block Copolymer Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | 2 mm/min; ISO 178 |
Eurostar Starpylen HU 70E3 HDPE, Injection Molding Starpylen HU 70E3 is a High Density Polypropylene Injection Molding Resin (also known as HU70E3)Information provided by Eurostar. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | 2 mm/min; ISO 178 |
Eurostar Starpylen MH0200A HDPE, Injection Molding Starpylen MH0200A is a High Density Polypropylene Injection Molding ResinInformation provided by Eurostar. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | high temp bending |
China-Yixing Longly Refractories Push Slab Corundum-Mullite Our company's production of a variety of corundum mullite push slab (moved plate), corundum-mullite seggar, corundum mullite corrugated board and other kinds of the kiln furniture, high refractorine.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
Aclo Accuguard Polypropylene CP1467V2CSL Copolymer Flame Retardant Copper Stabilized |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0436T40L1 Talc Reinforced |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ISO 178 |
Ascend Performance Materials Vydyne® 50BW Nylon 66, Dry as Molded Vydyne® 50BW is a general purpose Nylon 66 resin. Available in natural. Designed for extrusion applications that do not require use of a high-viscosity resin. This resin offers a well-balanced comb.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM Test |
BASF Styroclear GH 58 SBC Styroclear GH 58 is a high flow thermoplastic styrene-butadiene block copolymer with excellent mold release properties. It has crystal clarity, good toughness, good stiffness and warpage resistance.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
A. Schulman ComAlloy Voloy® 101 Polypropylene, Impact Modified, Flame Retardant, UL Data provided by the manufacturer, ComAlloy International Company.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Flexural Strength | 33.0 MPa @Thickness 19.0 mm |
4790 psi @Thickness 0.750 in |
ASTM D790 |
3A Composites Core Materials AIREX® PXw.385 Fiber-Reinforced Structural Foam Panel AIREX® PXw is a closed-cell, fiber reinforced polymer foam panel with a special formulation and very high mechanical properties. The sophisticated manufacturing process evenly distributes continuou.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
A. Schulman POLYFLAM™ E-15086-1B Mineral Impact Modified, Low Warp Polypropylene Black DescriptionPolyfort® E-15086-1B is a mineral impact modified low warp polypropylene black.Information provided by A. Schulman. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ISO 178 |
Ascend Performance Materials Vydyne® 50BWFS Nylon 66, Dry as Molded Vydyne® 50BWFS is a general purpose Nylon 66 resin. Available in natural. Designed for extrusion applications that do not require use of a highviscosity resin. This resin offers a well-balanced com.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | 2 mm/min; ISO 178 |
Sax Polymers SAXALEN PPC339T20 Polypropylene Copolymer, 20% Talc Filled SAXALEN PPC339T20 is a 20% mineral filled Polypropylene - Copolymer intended for injection molding with good flow properties und higher stiffness. The PP-Copolymer has low warpage behaviors and good.. |
|||
Flexural Strength | 33.0 MPa | 4790 psi | ASTM D790 |
A. Schulman POLYFLAM™ E-15086-1B Mineral Impact Modified, Low Warp Polypropylene Black DescriptionPolyfort® E-15086-1B is a mineral impact modified low warp polypropylene black.Information provided by A. Schulman. |