Sax Polymers SAXALEN PPC339T20 Polypropylene Copolymer, 20% Talc Filled

Category	Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene with 20% Talc Filler
Manufacturer	Sax Polymers
Trade Name	SAXALEN
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Sax Polymers SAXALEN PPC339T20 Polypropylene Copolymer, 20% Talc Filled.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

SAXALEN PPC339T20 is a 20% mineral filled Polypropylene - Copolymer intended for injection molding with good flow properties und higher stiffness. The PP-Copolymer has low warpage behaviors and good surface properties.Information provided by SAX Polymers

Physical Properties	Metric	English	Comments
Density	1.05 g/cc	0.0379 lb/in³
Melt Flow	12 g/10 min @Load 2.16 kg, Temperature 230 °C	12 g/10 min @Load 4.76 lb, Temperature 446 °F	from MVR; ISO 1033

Mechanical Properties	Metric	English	Comments
Tensile Strength	25.0 MPa	3630 psi	50 mm/min; ISO 527-1
Elongation at Break	18 %	18 %	50mm/min; ISO 527-1
Tensile Modulus	2.40 GPa	348 ksi	1 mm/min; ISO 527-1
Flexural Strength	33.0 MPa	4790 psi	2 mm/min; ISO 178
Flexural Modulus	2.00 GPa	290 ksi	2 mm/min; ISO 178
Izod Impact, Notched (ISO)	4.00 kJ/m² @Temperature -30.0 °C	1.90 ft-lb/in² @Temperature -22.0 °F	ISO 180/1A
	5.00 kJ/m² @Temperature 23.0 °C	2.38 ft-lb/in² @Temperature 73.4 °F	ISO 180/1A
Izod Impact, Unnotched (ISO)	24.0 kJ/m² @Temperature -30.0 °C	11.4 ft-lb/in² @Temperature -22.0 °F	ISO 180/1U
	55.0 kJ/m² @Temperature 23.0 °C	26.2 ft-lb/in² @Temperature 73.4 °F	ISO 180/1U
Charpy Impact Unnotched	2.50 J/cm² @Temperature -30.0 °C	11.9 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	5.00 J/cm² @Temperature 23.0 °C	23.8 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.500 J/cm² @Temperature -30.0 °C	2.38 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	0.700 J/cm² @Temperature 23.0 °C	3.33 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	70.0 °C	158 °F	80104 s=60mm; ISO 75-1 a
Vicat Softening Point	75.0 °C	167 °F	B/120; ISO 306

Processing Properties	Metric	English	Comments
Melt Temperature	220 - 250 °C	428 - 482 °F
Mold Temperature	40.0 - 70.0 °C	104 - 158 °F

Users viewing this material also viewed the following: