Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 20.0 MPa | 2900 psi | |
Quadrant EPP Fluorosint® MT-01 PTFE + additives, enhanced grade, compression moulded (ISO Data) Fluorosint MT-01 is an extreme service grade developed specifically for applications where the benefits of PTFE-based materials also require strength, stiffness and stability. Fluorosint MT-01 deliv.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | |
Quadrant EPP TIVAR® 1000 EC PE-UHMW + specific additives (ISO Data) TIVAR 1000 EC is a PE-UHMW grade containing specific additives rendering this material a lower surface resistivity than TIVAR 1000 antistatic, improving electrical conductivity and UV-resistance |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Quadrant EPP TIVAR® 88 W/BurnGuard, Flame Retardant Lining Material (ASTM Product Data Sheet) Promotes reliable, steady bulk material flow Abrasion-, chemical- and corrosion-resistant Low coefficient of friction No moisture absorption Reduces or eliminates arching, ratholing and erractic fl.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | STN EN ISO 178 |
Plastcom SLOVALEN PQ 91 N Polypropylene Homopolymer, Modified with Elastomer, Impacted FeaturesHomopolymer PP modified with elastomer. The addition of thermoplastic elastomer causes increased toughness, possible alternative to PP copolymers. General application in all industry branc.. |
|||
Flexural Strength | 20.0 MPa @Temperature 120 °C |
2900 psi @Temperature 248 °F |
ASTM D790 |
BASF Capron® 8200 NL Nylon 6 (DAM)
(discontinued **) Information provided by BASF Corporation.Capron® is no longer a part of the BASF standard line. The BASF nylon products have been consolidated in the Ultramid ® line. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | conditioned, 2 mm/min; ISO 178-A |
Lanxess Durethan® BC 550 DUSXBL 900116 Nylon 6 PA 6, non-reinforced, extrusion, Blastorm, impact modified, heat-ageing stabilizedInformation provided by LANXESS. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
SABIC Innovative Plastics LNP LUBRICOMP FL004 PE LNP* Lubricomp* FL004 is a compound based on Polyethylene resin containing 20% PTFE. Added features of this material include: Internally Lubricated. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
SABIC Innovative Plastics LNP THERMOCOMP TH0450C PU LNP* Thermocomp* TH0450C is a compound based on Polyurethane resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Flexural Strength | >= 20.0 MPa | >= 2900 psi | ISO 178 |
Shandong Guangyin GYBHVN Polymer Our GYBHVN products are mainly applied in fuel pipes and brake pipes of automobile and hoses of air conditioner.Information provided by Shandong Guangyin |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
A. Schulman POLYFORT™ PP 3701 Information provided by A. Schulman. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ISO 178 |
Borealis Daplen™ ED206HP TPO Compound Daplen ED206HP is a 25% mineral reinforced compound intended for injection molding. ED206HP has been developed especially for the car industry, to be used in interior parts requiring excellent scra.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
UBE UBESTA® 3030JFX1 Plasticized Industrial Grade Nylon 12 Description: UBE UBESTA® Industrial grade Nylon 12Comments: UV resistance, heat resistanceInformation provided by UBE. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
A. Schulman POLYFORT™ PP 3701 Information provided by A. Schulman. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Chase Plastics CP Pryme® NN300STL (COND, 50% RH) Nylon 66 (Utility Grade), Super Toughened, Internally Lubricated Information provided by Chase Plastics. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
A. Schulman POLYFORT™ PP 3701 Information provided by A. Schulman. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | GB/9341 |
Zhejiang Juner JEPP2056 PP For Automotive Parts Applications: BumpersInformation provided by Zhejiang Juner New Materials Co, Ltd. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | Olsen; ASTM D747 |
UBE B028 Polyethylene Description: UBE Polyethylene is polymerized at high pressure using a tubular reactor. Production conditions are strictly controlled ensuring the product's superior physical and mechanical prope.. |
|||
Flexural Strength | >= 20.0 MPa | >= 2900 psi | high temp bending |
China-Yixing Longly Refractories ASM-125 Cordierite-Mullite Featured mullite, cordierite as the main raw material, the use of advanced production technology, professionally manufacturing the kiln furniture of ceramic and powder metallurgy with load bearing b.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437T20L Talc Reinforced |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437T20L1 Talc Reinforced |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437T30L Talc Reinforced |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437T40L Talc Reinforced |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437W40L1 Wollastonite Reinforced |
|||
Flexural Strength | 20.0 MPa @Temperature 93.0 °C |
2900 psi @Temperature 199 °F |
ASTM Test |
BASF Ultramid® 8202 PA6 (Dry) Ultramid 8202 is a low viscosity, general purpose polyamide 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is also available in heat stabilized (Ult.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ISO 178 |
Ascend Performance Materials Vydyne® 50BWFS Nylon 66, Conditioned (2.5% Moisture) Vydyne® 50BWFS is a general purpose Nylon 66 resin. Available in natural. Designed for extrusion applications that do not require use of a highviscosity resin. This resin offers a well-balanced com.. |
|||
Flexural Strength | 20.0 - 34.0 MPa @Strain 5.00 % |
2900 - 4930 psi @Strain 5.00 % |
ASTM D790 |
Arkema Group KYNAR FLEX® 2850 Black Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. 150°C Temperature rating, pigmented. High stability in harsh thermal, chemical and ultraviolet environments. High toughness .. |
|||
Flexural Strength | 20.0 - 34.0 MPa @Strain 5.00 % |
2900 - 4930 psi @Strain 5.00 % |
ASTM D790 |
Arkema Group KYNAR FLEX® 2900-04 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Flexible, flame and smoke suppressant. High stability in harsh thermal, chemical and ultraviolet environments. High toughness.. |
|||
Flexural Strength | 20.0 - 34.0 MPa @Strain 5.00 % |
2900 - 4930 psi @Strain 5.00 % |
ASTM D790 |
Arkema Group KYNAR FLEX® 3120-50 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Flexible, 150°C temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness a.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ISO 178 |
Ascend Performance Materials Vydyne® 65A Nylon 66, General Purpose, intermediate viscosity, Conditioned Vydyne® 65A is a medium-viscosity, heat-stabilized PA66 resin suitable for injection-molding extrusion and compounding applications. It is available in natural color only. Vydyne 65A resin offers h.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ISO 178 |
Ascend Performance Materials Vydyne® 50BW Nylon 66, Conditioned (2.5% Moisture) Vydyne® 50BW is a general purpose Nylon 66 resin. Available in natural. Designed for extrusion applications that do not require use of a high-viscosity resin. This resin offers a well-balanced comb.. |