Polymer Property : Linear Mold Shrinkage, Flow = 0.013 in/in Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Linear Mold Shrinkage, Flow	0.013 - 0.019 cm/cm	0.013 - 0.019 in/in	ASTM D955
PolyOne Dynaflex™ G7950-1 NSFG Thermoplastic Elastomer (TPE) Dynaflex™ G7950-1 NSFG is a NSF 51 (food equipment) approved material suitable for a wide variety of applications. -NSF 51 approved -FDA (see Notes) -Overmold Adhesion to Polypropylene -Soft Touch,..
Linear Mold Shrinkage, Flow	<= 0.013 cm/cm @Thickness 4.00 mm, Temperature 23.0 °C	<= 0.013 in/in @Thickness 0.157 in, Temperature 73.4 °F	Injection Molded, Bergmann Method; No Standard
PolyOne Edgetek® QT-20MN/000 natural HI Syndiotactic Polystyrene (SPS) Information provided by PolyOne
Linear Mold Shrinkage, Flow	0.013 - 0.017 cm/cm	0.013 - 0.017 in/in	ASTM D955
PolyOne Geon™ Vinyl Flexible A9000 Polyvinyl Chloride, Flexible (PVC, Flexible) Recommended for interior applications.Information provided by PolyOne
Linear Mold Shrinkage, Flow	0.013 - 0.017 cm/cm	0.013 - 0.017 in/in	ASTM D955
PolyOne Geon™ Vinyl Flexible A90U2 Polyvinyl Chloride, Flexible (PVC, Flexible) GENERAL PURPOSE CLEAR PVC COMPOUND WITH LOW LEVEL OF U.V. INHIBITOR, to be used only in interior applications.Information provided by PolyOne
Linear Mold Shrinkage, Flow	0.013 - 0.017 cm/cm	0.013 - 0.017 in/in	on Tensile Bar; SABIC Method
SABIC Innovative Plastics LNP FARADEX MX10014 PP (Europe-Africa-Middle East) LNP* Faradex* Mx10014 is a compound based on Polypropylene resin containing Stainless Steel Fiber. Added features of this material include: EMI/RFI Shielding.
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in
Polyplastic Armlen® PP MF 25-3-901 Polypropylene, 20% Mineral Filled Heat stabilized, black colorInformation provided by PolyPlastic Group.
Linear Mold Shrinkage, Flow	0.013 - 0.021 cm/cm	0.013 - 0.021 in/in	ASTM D955
PolyOne Dynaflex™ G7640-1 (Natural) Thermoplastic Elastomer (TPE) Dynaflex™ G7640-1 (Natural) is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Non-Slip Grip - Overmold Adhe..
Linear Mold Shrinkage, Flow	0.013 cm/cm @Thickness 2.00 mm	0.013 in/in @Thickness 0.0787 in	DAM; ISO 294-4
DuPont Performance Polymers Zytel® 158L NC010 Nylon 612 (Unverified Data**) Zytel® 158L NC010 is an intermediate viscosity, lubricated polyamide 612 resin that is suitable for molding and extrusion applications.Information provided by DuPont Performance Polymers
Linear Mold Shrinkage, Flow	0.013 - 0.015 cm/cm @Thickness 3.20 mm	0.013 - 0.015 in/in @Thickness 0.126 in	ASTM D955
LG Chemical LUPOL HM3102A PP+MF10%, High Impact Description: Injection Molding, PP+MF10%, High Impact, Good WeatherabilityApplication: Automotive Interior PartsInformation provided by LG Chemical
Linear Mold Shrinkage, Flow	0.013 - 0.017 cm/cm	0.013 - 0.017 in/in	on Tensile Bar; SABIC Method
SABIC Innovative Plastics LNP LUBRICOMP RN001XXC PA 66 (Europe-Africa-Middle East) LNP* Lubricomp* RN001XXC is a compound based on Nylon 66 resin containing MOS2.
Linear Mold Shrinkage, Flow	0.013 cm/cm @Thickness 3.17 mm	0.013 in/in @Thickness 0.125 in	ASTM D955
Techmer ES HiFillÂ® PA6/6 GB25 L BK 25% Glass Bead Filler Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Bead, 25% Filler by WeightAdditive: LubricantFeatures: LubricatedAppearance: BlackInformation provided by TP Composites, Inc.
Linear Mold Shrinkage, Flow	0.013 - 0.016 cm/cm @Thickness 3.20 mm	0.013 - 0.016 in/in @Thickness 0.126 in	SABIC Method
SABIC Innovative Plastics NORYL GTX GTX918W PPE+PS+PA High flow NORYL GTX resin for under-the-hood and electrical applications requiring retention of properties under thermal load
Linear Mold Shrinkage, Flow	0.013 - 0.016 cm/cm @Thickness 3.20 mm	0.013 - 0.016 in/in @Thickness 0.126 in	SABIC Method
SABIC Innovative Plastics NORYL GTX GTX974 PPE+PA (Europe-Africa-Middle East) NORYL GTX974 is a material especially designed for in- or on-line painted bodypanels and fenders in particular. This material combines impact performance with conductivity for electro-static paintin..
Linear Mold Shrinkage, Flow	0.013 cm/cm @Time 86400 sec	0.013 in/in @Time 24.0 hour	ASTM D 955
SABIC Innovative Plastics LNP Thermocomp P1000P PA 6 LNP* Thermocomp* P1000P is a compound based on Nylon 6 resin. Added features of this material include: Exceptional Processing.This data was supplied by SABIC-IP for the Americas region.
Linear Mold Shrinkage, Flow	0.013 cm/cm @Time 86400 sec	0.013 in/in @Time 24.0 hour	ASTM D 955
SABIC Innovative Plastics LNP Thermocomp PZ006 PA 6 LNP* Thermocomp* PZ006 is a compound based on Nylon 6 resin containing Glass Fiber.This data was supplied by SABIC-IP for the Americas region.
Linear Mold Shrinkage, Flow	0.013 - 0.015 cm/cm @Thickness 3.20 mm	0.013 - 0.015 in/in @Thickness 0.126 in	SABIC Method
SABIC Innovative Plastics NORYL GTX GTX678 PPE+PA (Europe-Africa-Middle East) Noryl GTX678 resin is a high performance blend of PPE/PA that exhibits an excellent balance on non-halogenated flame retardance, conductivity, ductility, and high-heat resistance. This grade can be..
Linear Mold Shrinkage, Flow	0.013 - 0.017 cm/cm	0.013 - 0.017 in/in	DIS 294-4
Wellman Wellamid® MR409 22H-GY1 Nylon 66, 40% Mineral Reinforced All information provided by Wellman Engineered Resins.
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in	ISO 294-4, 2577
EMS-Grivory Grivory® 2S 20 nat PA610 Product Description: Grilamid 2S 20 natural is an unmodified medium viscosity polyamide 610 (PA610), designed for injection molding as well as extrusion. It is characterized by the following product..
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in	ISO 294-4 2577
DuPont Performance Polymers Delrin® 100ST BK602 Acetal (POM) (Unverified Data**) Super Toughened High Viscosity Acetal Homopolymer Delrin 100ST BK602 is a super tough high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed part..
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in	ISO 294-4 2577
DuPont Performance Polymers Delrin® 100ST NC010 Acetal (POM) (Unverified Data**) Super Toughened High Viscosity Acetal Homopolymer Delrin 100ST NC010 is a super tough high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed part..
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in	ISO 294-4 2577
DuPont Performance Polymers Sorona® FG3301 NC010 Polytrimethylene Terephthalate (PTT) (Unverified Data**) Unreinforced Renewably Sourced Polytrimethylene Terephthalate Developed for Food Contact Applications Sorona FG3301 NC010 is an unreinforced polytrimethylene terephthalate resin containing 35% renew..
Linear Mold Shrinkage, Flow	0.013 - 0.015 cm/cm @Time 86400 sec	0.013 - 0.015 in/in @Time 24.0 hour	E2P method
Eurostar Starflam MX05036 PP, Flame Retardant, Injection Molding Starflam MX05036 is an Unfilled, Halogen Free Flame Retardant, Polypropylene Injection Molding ResinInformation provided by Eurostar.
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in	Eurotec
Eurotec® Tecomid® NA40 NL FA50 PA6.6, unfilled, flame retardant - halogen free, natural Information provided by Eurotec®
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in	Eurotec
Eurotec® Tecomid® NB40 NL IX PA6, impact modified, natural Information provided by Eurotec®
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in	DAM; ISO 294-4 2577
DuPont Performance Polymers Zytel® 151 NC010 Nylon 612 (Unverified Data**) Unreinforced Polyamide 612Information provided by DuPont Performance Polymers
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in
BASF Novolen® 1184 L Polypropylene Nucleated grade with high processing stability containing antistatic for thermoformed parts.Data was collected by ISO methods and provided by BASF.
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in
BASF Novolen® 2500 H Polypropylene Injection molded parts, blow moldings and thermoformed parts.Data was collected by ISO methods and provided by BASF.
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in
BASF Novolen® 2800 J Polypropylene Injection molded partsData was collected by ISO methods and provided by BASF.
Linear Mold Shrinkage, Flow	0.013 cm/cm	0.013 in/in
BASF Novolen® 3340 PC Polypropylene Nucleated grade for injection moldings with higher transparency.Data was collected by ISO methods and provided by BASF.
Linear Mold Shrinkage, Flow	0.013 cm/cm @Thickness 3.17 mm	0.013 in/in @Thickness 0.125 in	1/8" Section
Lucent Polymers TPO-10T Thermoplastic Polyolefin, 10% Mineral Filled Melt Flow Adjustable for ApplicationAdd "U" for UV StabilizedAdd "H" for Heat StabilizedInformation provided by Lucent Polymers, Inc.