Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Multibase Multi-Flex® TPE A 8592 MEDIUM TAUPE Heating aging the material 1000 hours at 125°C leads to a +7% change in the tensile strength, +4% change in elongation, and +12% change in tear strength. Ash is 16%. Multi-Flex TPE contains Krato.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
NYCOA 7551 Copolymer Nylon Alloy resistant to zinc chloride and other automotive fluids, good adhesion to olefins, mold & extrusion.Information provided by NYCOA, Inc. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
Premix Thermoplastics PRE-ELEC® PP 1398 Conductive Thermoplastic Compound PRE-ELEC® PP 1398 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-E.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Chevron Phillips K-Resin® BK15 Styrene-Butadiene Copolymer, Injection Molding Grade
(discontinued **) Styrene-Butadiene CopolymerCustomer Benefits: BK15 is an SBC consisting of our developmental BK10 grade with a mold release added for easier processing. BK15 molded parts give excellent detail on f.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Chevron Phillips K-Resin® KR99HG Styrene-Butadiene Copolymer, Injection Molding Grade
(discontinued **) Styrene-Butadiene CopolymerCustomer Benefits: This SBC is easily processed by injection molding. Molded parts provide excellent part detail on fast production cycles. Molded parts have excellent c.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Techmer ES HiFill® HDPE GF10 CC 10% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 10% Filler by WeightFeatures: Chemically CoupledInformation provided by TP Composites, Inc. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Techmer ES Luriblend® TPX-PA6-95002 Availability: North AmericaForms: PelletsAdditive: LubricantFeatures: LubricatedInformation provided by TP Composites, Inc. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Techmer ES Luriblend® HDPE TL10 Availability: North AmericaForms: PelletsAdditive: PTFE LubricantInformation provided by TP Composites, Inc. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
Von Roll Isola IMI Varnish 74010A Epoxy Varnish for Electrical Insulation Data provided by Von Roll Isola USA.Flash Point: 19°C. Average solids: 60%. Usage Notes: Use with IMI 74010 hardener for final coat over field coils, windings, and heavy duty motors. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | DIN 53479 |
Polyram RamOfin PPH302G4 Polypropylene, 20% Glass Fiber 20% glass fiber reinforced polypropylene for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
Polyram PlusTek PD1002NT Nylon 12 for Extrusion Medium viscosity Nylon 12 for extrusion application.Information provided by Polyram. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Chevron Phillips K-Resin® KR03NW Styrene-Butadiene Copolymer, Sheet Grade Styrene-Butadiene Copolymer. No wax (NW) form of K-Resin® KR03 to facilitate printing.Customer Benefits: This SBC is easily processed by injection molding or sheet extrusion and molded parts give .. |
|||
Density | 1.01 g/cc @Temperature 330 °C |
0.0365 lb/in³ @Temperature 626 °F |
Melt |
Covestro Apec® 1695 Polycarbonate Easy flowingeasy to demoldsoftening temperature (VST/B 120)=158 °CPreprocessingMax. Water content |
|||
Density | 1.01 g/cc @Temperature 240 °C |
0.0365 lb/in³ @Temperature 464 °F |
Melt |
Covestro Bayblend® FR 3010 Polycarbonate + ABS, Flame Retardant Grade Injection molding gradeincreased heat resistanceVicat/B 120 temperature = 110 °CUL-listing 94 V-0 (1.5 mm) antimony-, chlorine- and bromine-free flame retardantglow wire test (GWFI): 960 °C (.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
EMS-Grivory Grivory® L 16 GM nat PA12 Grilamd L16 GM is a low-viscosity, non-reinforced PA 12 grade, UV- and heat-stabilized. The modification with a crystallization regulator causes a quick freeze and a fine, crystalline structure. Due.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
EMS-Grivory Grivory® L 20 LM PA12 Product Description: Grilamid L 20 LM is a medium viscosity Polyamide 12 (PA12) extrusion grade. Grilamid L 20 LM is UV and heat stabilized and has been modified with a nucleation agent which result.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
Cytec EN-8 (Conap) Casting, Potting, and Molding Compound High Technology Potting, Casting and Molding CompoundsTwo-component, polybutadiene-based liquid urethane casting and potting systems. When reacted these high technology systems produce tough, stable.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
DuPont Performance Polymers Zytel® 135F NC010 Nylon 66
(Unverified Data**) Unreinforced Nucleated Polyamide 66 Zytel 135F NC010 is a nucleated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.Information provided by DuPont Pe.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
Arkema Group Orgalloy® LE 60LM Flexible Nylon Alloy (Conditioned) LE series, flexible polyamide alloys: processability on PE screw, low moisture absorption, chemical resistance (no known solvents).ISO data provided by the manufacturer, Arkema. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Arkema Group Pebax® 3533 Polyether Block Amide (PEBA) Information provided by Arkema Group |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
Arkema Group Rilsamid® PA 12 AESNO MED Nylon 12 Rilsamid® AESNO MED is a rigid polyamide 12 with high viscosity designed for tube extrusion. This grade dedicated to extrusion offers the highest quality and it is specifically designed to meet the.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Aclo Accutech Polypropylene Copolymer CP0437C30L Calcium Reinforced |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
BASF AMIX TI Formula: C9H21NO3CAS: 122-20-3Description: AMIX TI is a dark solid that is almost odorless. It is fully soluble in waterSynonyms: TRIPA, 1,1’,1”-Nitrilotri-2-propanol, Tri-2-propanolamine, Tri-is.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
BASF Vinyl Caprolactam Formula: C8H13NOCAS: 2235-00-9Description: Vinyl caprolactam is a yellowish solid, with a faint specific odor. It is soluble in water.Synonyms: NVC, Vinyl-caprolactameApplications: Intermediate use.. |
|||
Density | 1.01 - 1.14 g/cc | 0.0365 - 0.0412 lb/in³ | Average value: 1.06 g/cc Grade Count:20 |
Overview of materials for Nylon, Flexible Alloy This property data is a summary of similar materials in the MatWeb database for the category "Nylon, Flexible Alloy". Each property range of values reported is minimum and maximum values of appropri.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Chevron Phillips K-Resin® BK11 Styrene-Butadiene Copolymer, Injection Molding Grade
(discontinued **) Styrene-Butadiene CopolymerCustomer Benefits: BK11 is an SBC consisting of KR03 grade with a mold release added of easier processing. BK11 molded parts give excellent detail on fast production cycl.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
Borealis Daplen™ KSX65T20 Polypropylene Compound 20% Mineral Filled Daplen KSX65T20 is a 20% mineral filled grade intended for injection molding. Daplen KSX65T20 has been developed especially for the car industry, to be used in interior parts. Daplen KSX65T20 offe.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 2781 |
Termopol Termoton® K2GA2060A TPE Compound, based on SEBS and Polyolefins Main Characteristics: Wide range of hardness; High strength elasticity; 100% recyclable; Easy processing by means of the traditional technologies for thermoplastic materials; Additional resistance t.. |