- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, Unreinforced
- NYCOA 7551 Copolymer Nylon Alloy
NYCOA 7551 Copolymer Nylon Alloy
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced |
| Manufacturer | NYCOA, Inc. |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | NYCOA 7551 Copolymer Nylon Alloy.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
resistant to zinc chloride and other automotive fluids, good adhesion to olefins, mold & extrusion.Information provided by NYCOA, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
| Water Absorption | 0.50 % | 0.50 % | ASTM D570 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 35.0 MPa | 5080 psi | ASTM D638 |
| Elongation at Break | 350 % | 350 % | ASTM D638 |
| Flexural Yield Strength | 16.0 MPa | 2320 psi | ASTM D790 |
| Flexural Modulus | 0.400 GPa | 58.0 ksi | ASTM D790 |
| Izod Impact, Notched | 6.50 J/cm | 12.2 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 200 °C | 392 °F | ASTM D789 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 250 °C | 482 °F | |
| Rear Barrel Temperature | 200 °C | 392 °F | |
| Middle Barrel Temperature | 230 °C | 446 °F | |
| Front Barrel Temperature | 250 °C | 482 °F | |
| Mold Temperature | 80.0 °C | 176 °F | |
| Drying Temperature | 76.0 °C | 169 °F |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PH 59 T 40 LW 031 PP, 40% mineral filling, laser label
- Eastman Heatwave CF746 Polymer (discontinued **)
- Lubrizol Advanced Materials Pearlstick® 49-46/19 Polyester based TPU (discontinued **)
- Star Plastics ABSLG5035 Molding Grade ABS, Low Gloss
- Teknor Apex Telcar® TL-83-F912-UV Thermoplastic Elastomer
- A. Schulman POLYTROPE™ TPP 293 Injection Molding Grade Olefinic Thermoplastic Elastomer
- Lubrizol Estane® CR180A Thermoplastic Polyurethane
- Covestro Bayfill® EA 6003 Polyurethane Energy-Absorbing Semi-Rigid Foam, Recoverable Grade, MDI-based 2-Component Liquid System
- CRP Technology Windform® GT Polyamide Glass Composite
- Lubrizol ESTALOC® 59003 Ester-Type, Reinforced Engineering Thermoplastic (European Grade)
Copyright © lookpolymers.com All Rights Reserved