- HOME
- POLYMER SEARCH
- Ferrous Metal
- Maraging Steel
- Special Metals UDIMET® Alloy 250 Maraging Steel
Special Metals UDIMET® Alloy 250 Maraging Steel
| Category | Metal , Ferrous Metal , Maraging Steel |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | UDIMET® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals UDIMET® Alloy 250 Maraging Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A high-strength, maraging steel of iron and nickel with additions of molybdenum and titanium. It has the strength of standard 18Ni (250) maraging steel but the advantages of containing less molybdenum and no cobalt. Used for missile cases, aircraft forgings, power-transmission shafts and couplings, springs, bolts, punches, and dies. Standard product forms are round, flats, forging stock, and wire.Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.92 g/cc | 0.286 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 1830 MPa | 265000 psi | Precipitation Hardened |
| Tensile Strength, Yield | 1750 MPa @Strain 0.200 % |
254000 psi @Strain 0.200 % |
Precipitation Hardened |
| Elongation at Break | 12 % | 12 % | Precipitation Hardened |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 10.04 µm/m-°C @Temperature 20.0 - 100 °C |
5.578 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Thermal Conductivity | 20.3 W/m-K | 141 BTU-in/hr-ft²-°F | |
| Melting Point | 1435 - 1505 °C | 2615 - 2741 °F | |
| Solidus | 1435 °C | 2615 °F | |
| Liquidus | 1505 °C | 2741 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | 0.050 - 0.15 % | 0.050 - 0.15 % | |
| Carbon, C | <= 0.030 % | <= 0.030 % | |
| Iron, Fe | 75 % | 75 % | As remainder |
| Manganese, Mn | <= 0.10 % | <= 0.10 % | |
| Molybdenum, Mo | 2.75 - 3.25 % | 2.75 - 3.25 % | |
| Nickel, Ni | 18 - 22 % | 18 - 22 % | |
| Phosphorous, P | <= 0.010 % | <= 0.010 % | |
| Silicon, Si | <= 0.10 % | <= 0.10 % | |
| Sulfur, S | <= 0.010 % | <= 0.010 % | |
| Titanium, Ti | 1.3 - 1.45 % | 1.3 - 1.45 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000489 ohm-cm | 0.0000489 ohm-cm |
Users viewing this material also viewed the following:
- Multibase Multi-Flex® TPO D-6507
- Polykemi AB POLYfill PPC T3020 Polypropylene Copolymer, Mineral Reinforced
- Solvay Specialty Polymers Halar® 6014F Polyethylene, Chlorotrifluoroethylene (ECTFE) (Unverified Data**)&
- SGL Carbon Group SIGRAFIL C® filled PEEK
- SABIC Innovative Plastics ULTEM CRS5211R PEI
- SABIC Innovative Plastics LNP THERMOCOMP DC006H PC (Asia Pacific)
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 30 PHR N990 Filler
- PolyOne Synplast™ DOA-FDA Di (2-ethylhexyl) Adipate
- A. Schulman POLYBATCH™ Yellow 26787V Concentrate Based In LDPE
- BASF Styropor® P 240 EPS
Copyright © lookpolymers.com All Rights Reserved