- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Shin-Etsu Silicones LIMSâ„¢ KE2004-5A/B Elastomer
Shin-Etsu Silicones LIMSâ„¢ KE2004-5A/B Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Shin-Etsu Silicones |
| Trade Name | LIMS™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Shin-Etsu Silicones LIMSâ„¢ KE2004-5A/B Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information Provided by Shin-Etsu Silicones of America, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.08 g/cc | 1.08 g/cc | |
| Viscosity | 1.40e+6 cP | 1.40e+6 cP | B |
| 1.70e+6 cP | 1.70e+6 cP | A | |
| Linear Mold Shrinkage | 0.023 cm/cm | 0.023 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 5.0 | 5.0 | |
| Tensile Strength | 2.10 MPa | 305 psi | |
| Elongation at Yield | 870 % | 870 % | |
| 100% Modulus | 0.000152 GPa | 0.0220 ksi | |
| Tear Strength | 9.00 kN/m | 51.4 pli | |
| Compression Set | 30 % @Temperature 150 °C, Time 3600 sec |
30 % @Temperature 302 °F, Time 1.00 hour |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 10.0 min @Temperature 120 °C |
0.167 hour @Temperature 248 °F |
Press Cure |
| 60.0 min @Temperature 150 °C |
1.00 hour @Temperature 302 °F |
Post Cure |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Translucent | |
| Cure Rate | 28 | T10 (302°F, ODR) |
| 47 | T90 (302°F, ODR) |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved