Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
Polymax® Maxelast® P3672 TPE, PP Overmold or Standalone use Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsTool Hand GripsSporting GoodsWire & Cable ElectronicsMedical DevicesPlasti.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
Oxford Polymers Oxnilon 66-15-IMP Impact Modified Nylon 66 for Injection Molding Impact Modified Nylon 66 for Injection MoldingInformation provided by Oxford Polymers. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
SABIC Innovative Plastics GELOY CR8510 ASA (Asia Pacific) ASA with outstanding UV exposure performance for both exterior and interior applications. F1 Rated. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
EG93A Polyurethane-based Biomedical Elastomer |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
GEHR Plastics ECOGEHR® PA 6.10 Nylon 6.10 Dry, 60% Sebacic Acid Nylon 6.10 is 60 % sebacic acid, which is obtained from castor oil. This material combines a low density (for polyamide) with good cold impact strength, and its low water absorption makes it very di.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ISO 1183 |
Gromax BTE35-DN00N1 Nylon 6 (Dry) Information provided by Gromax Enterprises Corp. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | |
Momentive Performance Materials Siloprenâ„¢ LSR 2560 Liquid Silicone Rubber - Textile Coating This LSR elastomer is a specialty grade, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated tempera.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | |
Momentive Performance Materials Siloprenâ„¢ LSR 4020 Liquid Silicone Rubber - Healthcare LSR elastomers are a two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated temperatures. The molding .. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | |
Lucite International Elvacite ® 2046 Acrylic Resin Elvacite® 2046 is a high molecular weight iso-butyl / n-butyl methacrylate copolymer. Elvacite® 2046 is useful in aluminum finishes, ceramic coatings, and aerosol snows. It is soluble in miner.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | |
Momentive Performance Materials TSE 221-3U Heat Cured Rubber Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
Samsung Cheil Industries Starex® TX-0530T TRABS, Unreinforced Information provided by Samsung Cheil Industries. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
Samsung Cheil Industries Starex® QU-0191S ABS, Unreinforced Extrusion Grade Information provided by Samsung Cheil Industries. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
SABIC Innovative Plastics NORYL GTX GTX974 PPE+PA (Europe-Africa-Middle East) NORYL GTX974 is a material especially designed for in- or on-line painted bodypanels and fenders in particular. This material combines impact performance with conductivity for electro-static paintin.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D 792 |
SABIC Innovative Plastics Noryl GTX GTX979 PPE+PA (Asia Pacific) NORYL GTX979 is a conductive, high heat material. It is especially designed for in- and on-line painted bodypanels and fenders in particular, with conductivity for electro-static painting in an uniq.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
SABIC Innovative Plastics NORYL HNA033 PPE+HIPS Noryl* HNA033 resin is an unfilled modified polyphenylene ether resin designed to withstand several cycles in an autoclave. This resin is suitable for multiple conversion routes and is available in.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ISO 1183/1 |
A. Schulman FORMION™ FI 231 5% Mineral Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 231 is an injection molding grade, 5% mineral reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness. Ap.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
A. Schulman POLYBATCH™ Green 3012E Concentrate Based In Polyethylene DescriptionPOLYBATCH® 3012E is a green color concentrate based in polyethylene. This concentrate was designed to provide color in polyolefin film and molding applications. POLYBATCH® 3012E is he.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ISO 1183/1 |
A. Schulman FORMION™ FI 231 5% Mineral Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 231 is an injection molding grade, 5% mineral reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness. Ap.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
Ensinger NORYL® Polyphenylene oxide (PPO) NORYL®, due to its inherent chemical composition, exhibits unusually low moisture absorption. Therefore, good electrical insulating properties are realized over a wide range of humidity and temper.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
Ensinger TECANYL™ MT XRO Autoclavable Polymer TECANYL™ MT is a new family of autoclavable materials developed for medical device applications. The material offers the desired performance properties of PPSU based resins with the machining ease.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
Diamond Polymers ASA TW-23V Description: ASA Weatherable Polymer, Injection Molding Grade, High HeatInformation provided by Diamond Polymers, Inc. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
Clariant Renol PA133GN-109 Nylon 66, High Impact, Heat Stabilized, Lubricated Data provided by Clariant Masterbatches |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | 23°C; ASTM D792 |
Asahi Kasei Xyron® A1400 PPE/PA Oil ResistantInformation provided by Asahi Kasei |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | 23°C; ASTM D792 |
Asahi Kasei Xyron® 340V Modified Polyphenylene Ether Flame RetardantInformation provided by Asahi Kasei |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ISO 2782 |
AlphaGary Evoprene™ G 975 SEBS Thermoplastic Elastomer Evoprene™ G compounds are styrene – ethylene butylene –styrene base thermoplastic elastomer with related hydrogenated block copolymers. These polymers are fully saturated so the resistance to oxi.. |
|||
Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
SABIC Innovative Plastics GELOY CR7500 ASA (Asia Pacific) High heat ASA with optimum flow-impact balance. For Automotive applications and Automotive colors only. |