Songhan Plastic Technology Co.,Ltd.

Saint-Gobain Furon®, Kapton® K275 Tape

Category Polymer , Adhesive , Tape , Thermoplastic
Manufacturer Saint-Gobain Perfomance Plastics
Trade Name Furon®, Kapton®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Saint-Gobain Furon®, Kapton® K275 Tape.pdf
  Online Service   lookpolymers   27660005
Material Notes:
Description: A 1 mil thermally conductive Kapton® film, coated on both sides with 2 mils of thermally-conductive pressure-sensitive adhesive. Recommended uses: Excellent for use in small, compact environments where electrical conductivity of interface material can pose a threat. Application Advantages: Kapton (MT) provides excellent dielectric strength while minimizing thermal resistanceHigh peel strength adhesion to minimize air entrapment Material can be pre-attached to a heat sink or CPUAdverse effects of surface roughness are minimized through a highly conformable pressure-sensitive adhesiveFlame Retardant version availableAvailable in slit-rolls or die-cut shapesAll data based on a 0.0045 inch test sample.Information provided by Saint Gobain Performance Products.
Mechanical Properties Metric English Comments
Tear Strength 2.80 kN/m
16.0 pli
Tensile Strength; ASTM D1000
Thermal Properties Metric English Comments
Thermal Conductivity 0.400 W/m-K
2.78 BTU-in/hr-ft²-°F
ASTM E1530
Maximum Service Temperature, Air 149 °C
300 °F
Minimum Service Temperature, Air -28.9 °C
-20.0 °F
Electrical Properties Metric English Comments
Volume Resistivity 3.80e+14 ohm-cm
3.80e+14 ohm-cm
Dielectric Strength 51.2 kV/mm
1300 kV/in
ASTM D1000
Descriptive Properties Value Comments
Color Green
Thermal Impedance @ 10 psi 0.4°C in^2/W
ASTM E1530
Copyright © All Rights Reserved