Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Elektro-Isola Etronax MFP G Phenolic, Cotton Fabric Reinforcement, Black, Tubes

Category Polymer , Thermoset , Phenolic
Manufacturer Elektro-Isola
Trade Name Etronax
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Elektro-Isola Etronax MFP G Phenolic, Cotton Fabric Reinforcement, Black, Tubes.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: Exclusively for mechanical applications. The combination of cotton/synthetic reinforcement and a graphite-modified resin results in a material with low friction and especially high wear resistance in aggressive and dust-filled environments. Impact-resistant, noise-reducing and well suited in applications, where high mechanical load and wear resistance are required. Good dry-run properties. Can be lubricated with water, oil or grease. Alternative to material containing asbestos.Applications: Bearing bushings, cages for spindle bearings, and guide rings for hydraulic cylinders.Information provided by Elektro-Isola
Physical Properties Metric English Comments
Density 1.30 g/cc

@Thickness >=0.000 mm
0.0470 lb/in³

@Thickness >=0.000 in
24hr/23°C/50% RH; ISO 1183-A; IEC/EN 61212-2 7.3
Water Absorption 0.50 %
0.50 %
24hr/50°C+24hr in water at 23°C; ISO 62-1; IEC/EN 61212-2 7.2
Mechanical Properties Metric English Comments
Flexural Strength 120 MPa

@Diameter >=100 mm
17400 psi

@Diameter >=3.94 in
24hr/23°C/50% RH; ISO 178; IEC/EN 61212-2 5.1
Compressive Strength 160 MPa

@Temperature 23.0 °C,
Time 86400 sec
23200 psi

@Temperature 73.4 °F,
Time 24.0 hour
50% RH, Axial; ISO 604; IEC/EN 61212-2 5.2
Adhesive Bond Strength 150 MPa

@Diameter <=100 mm
21800 psi

@Diameter <=3.94 in
24hr/23°C/50% RH; IEC 60212-2; IEC/EN 61212-2 5.3
Thermal Properties Metric English Comments
Maximum Service Temperature, Inert 100 °C

@Thickness 3.00 mm,
Time 7.20e+7 sec
212 °F

@Thickness 0.118 in,
Time 20000 hour
IEC 60695-11-10; IEC/EN 61212-2 7.1
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved