Songhan Plastic Technology Co.,Ltd.

Abatron AboCast 8-13/Abocure 8-13 Epoxy  (discontinued **)

Category Polymer , Thermoset , Epoxy
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Abatron AboCast 8-13/Abocure 8-13 Epoxy  (discontinued **).pdf
  Online Service   lookpolymers   27660005
Material Notes:
2-part, clear, solvent-free dielectric epoxy casting compound.Processing: 100/12.80 ratio (pbw); Gel time, 100 g (3.5 oz.): 53 minutes; cures in 16 hours at 25°C (77°F); postcure: 2 hours at 100°C (212°F).Applications: solventless casting, adhesive, and coating.
Physical Properties Metric English Comments
Water Absorption 0.14 %
0.14 %
in 24 hours.
Viscosity Measurement 400
Mechanical Properties Metric English Comments
Hardness, Shore D 88
Tensile Strength, Ultimate 62.05 MPa
9000 psi
Elongation at Break 1.8 %
1.8 %
Modulus of Elasticity 3.172 GPa
460.1 ksi
Flexural Yield Strength 133.76 MPa
19400 psi
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 77.0 °C
171 °F
Deflection temperature; load unknown.
Electrical Properties Metric English Comments
Electrical Resistivity 1.70e+10 ohm-cm

@Temperature 93.3 °C
1.70e+10 ohm-cm

@Temperature 200 °F
7.40e+12 ohm-cm

@Temperature 65.6 °C
7.40e+12 ohm-cm

@Temperature 150 °F
6.90e+13 ohm-cm

@Temperature 25.0 °C
6.90e+13 ohm-cm

@Temperature 77.0 °F
Dielectric Constant 3.79

@Frequency 1e+6 Hz

@Frequency 1e+6 Hz
Dissipation Factor 0.010

@Frequency 1e+6 Hz

@Frequency 1e+6 Hz
Processing Properties Metric English Comments
Processing Temperature 25.0 °C
77.0 °F
Curing time: 16 hours; Postcure: 2 hours/100°C (212°F)
Copyright © All Rights Reserved