Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Processing Temperature = 25.0 °C Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Processing Temperature 25.0 °C
77.0 °F
Curing Agent Temperature
Northstar Polymers MSS-A85C Ester Base Polyurethane
This high performance polyester system is one of a family of polymer systems developed by Northstar Polymers for demanding work environments. Urethane elastomers molded with this system exhibit hig..
Processing Temperature 25.0 °C
77.0 °F
Curing Agent Temperature
Northstar Polymers MGP-D50A High Performance Polyurethane Cast Elastomer System 50D
This is a PTMEG/MDI base high-performance polyurethane casting system. This system is recommended to applications in which the part requires some load-bearing, slide abrasion, constant water contac..
Processing Temperature 25.0 °C
77.0 °F
Curing time: 3 weeks
Abatron AboCast 8-2/Abocure 8-2 Epoxy  (discontinued **)
2-part solvent-free dielectric epoxy casting compound.Processing: 100/50 ratio (pbw); Gel time, 100 g (3.5 oz.): 265 minutes; cures in 3 weeks at 25°C (77°F).Applications: solventless casting, adh..
Processing Temperature 25.0 °C
77.0 °F
Curing time: 3 weeks
Abatron AboCast 8-9/Abocure 8-9 Epoxy  (discontinued **)
2-part solvent-free dielectric epoxy casting compound.Processing: 100/50 ratio (pbw); Gel time, 100 g (3.5 oz.): 480 minutes; cures in 3 weeks at 25°C (77°F).Applications: solventless casting, adh..
Processing Temperature 25.0 °C
77.0 °F
Curing time: 6 hours; Postcure: 2 hours/100°C (212°F)
Abatron AboCast 8-10/Abocure 8-10 Epoxy  (discontinued **)
2-part solvent-free dielectric epoxy casting compound.Processing: 100/35 ratio (pbw); Gel time, 1 lb. (2.2 kg): 45 minutes; cures in 6 hours at 25°C (77°F); postcure: 2 hours at 100°C (212°F).Ap..
Processing Temperature 25.0 °C
77.0 °F
Curing time: 2 weeks
Abatron AboCast 8-18/Abocure 8-18 Epoxy  (discontinued **)
2-part, clear, solvent-free dielectric epoxy casting compound.Processing: 100/32.00 ratio (pbw); Gel time, 100 g (3.5 oz.): 120 minutes; cures in 2 weeks at 25°C (77°F).Applications: solventless c..
Processing Temperature 25.0 °C
77.0 °F
Curing time: 2 weeks
Abatron AboCast 8-19/Abocure 8-19 Epoxy  (discontinued **)
2-part, clear, solvent-free dielectric epoxy casting compound.Processing: 100/32.00 ratio (pbw); Gel time, 100 g (3.5 oz.): 120 minutes; cures in 2 weeks at 25°C (77°F).Applications: solventless c..
Processing Temperature 25.0 °C
77.0 °F
Cure Schedule: 7 days @ 25°C
Huntsman HZ 3441 OU-66 Phenalkamine Hardener
Approx. H+ equivalent weight 190. Mix Ratio with GY 6010 is 50.Comments/Applications: Low temperature cure coatings with excellent corrosion and moisture resistance. Cure can go down to 0°C. ..
Processing Temperature 25.0 - 80.0 °C
77.0 - 176 °F
Hardening Temperature
Möller Medical PolySkin 78 M NanoCoating
Decorative coating in "metallic look," hardening at room temperature up to 80°C.Information provided by Möller Medical, Member of CENTROTEC Group
Processing Temperature 25.0 °C
77.0 °F
Momentive Performance Materials RTV102 White Adhesive Sealant, High Strength Paste
One-part acetoxy cure. Acetoxy cure silicones are the most commonly used type of RTV materials and are considered GE Silicones' general purpose product line. Typical uses: High strength high perfo..
Processing Temperature 25.0 °C
77.0 °F
Momentive Performance Materials RTV123 Black Adhesive Sealant, General Purpose Paste
One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: General purpose for bonding ..
Processing Temperature 25.0 °C
77.0 °F
Momentive Performance Materials RTV133 Black Adhesive Sealant, Flame Retardant Paste
One-part alkoxy cure. Typical uses: As a sealant on firewalls or as a flame retardant coating. Use in switching devices, motors, and high voltage transformers.Data provided by the manufacturer, GE..
Processing Temperature 25.0 °C
77.0 °F
Momentive Performance Materials RTV160 White Adhesive Sealant, Non-Corrosive Pourable
One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Non-corrosive prote..
Processing Temperature 25.0 °C
77.0 °F
Cure time 24 hrs.
Momentive Performance Materials RTV21 Pink General Purpose Potting/Encapsulating Compound
Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate..
Processing Temperature 25.0 °C
77.0 °F
Cure time 24 hrs.
Momentive Performance Materials RTV8112 White General Purpose Potting/Encapsulating Compound
Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate..
Processing Temperature 25.0 °C
77.0 °F
Cure time 24 hrs.
Momentive Performance Materials RTV8262 Red General Purpose Potting/Encapsulating Compound
Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate..
Processing Temperature 25.0 °C
77.0 °F
Cure time 8 hours.
Momentive Performance Materials TSE3331 Dark Gray Thermally Conductive Potting/Encapsulating Compound
Two-part addition cure. Two-part addition cure RTV silicones can be cured very quickly with the use of high heat. Addition cure products have no cure by-products and can be used to unlimited depth..
Processing Temperature 25.0 °C
77.0 °F
Momentive Performance Materials TSE392 Translucent Adhesive Sealant, Thixotropic Paste
One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Non-corrosive adhes..
Processing Temperature 25.0 °C
77.0 °F
Momentive Performance Materials IGS3703 Insulating Glass Sealant
One-component silicone which cures to form a high strength, high modulus sealant with excellent adhesion to glass. Tack-free time 2.5 hr. Peel Strength 50 lb/in. Sag/slump 0.1 in.Data provided by..
Processing Temperature 25.0 °C
77.0 °F
Cure time 24 hrs.
Momentive Performance Materials RTV560 Red Extreme High Temperature Potting/Encapsulating Compound
Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate..
Processing Temperature 25.0 °C
77.0 °F
Momentive Performance Materials RTV5818 Translucent Adhesive Sealant, Fast Cure Paste
One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: Fast-curing primerless adhes..
Processing Temperature 25.0 °C
77.0 °F
Cure time 1 hour.
Momentive Performance Materials RTV6156 Clear Potting/Encapsulating Gel
Two-part addition cure. Two-part addition cure RTV silicones can be cured very quickly with the use of high heat. Addition cure products have no cure by-products and can be used to unlimited depth..
Processing Temperature 25.0 °C
77.0 °F
Cure time 2 hours.
Momentive Performance Materials RTV6166 Clear Potting/Encapsulating Gel
Two-part addition cure. Two-part addition cure RTV silicones can be cured very quickly with the use of high heat. Addition cure products have no cure by-products and can be used to unlimited depth..
Processing Temperature 25.0 °C
77.0 °F
Cure time 4 hours.
Momentive Performance Materials RTV6428 Dark Gray General Purpose Potting/Encapsulating Compound
Two-part addition cure. Two-part addition cure RTV silicones can be cured very quickly with the use of high heat. Addition cure products have no cure by-products and can be used to unlimited depth..
Processing Temperature 25.0 °C
77.0 °F
Suggested time at this temperature is 24 hr. May also be cured for shorter time at higher temperatures.
Von Roll Isola IMI E-Solder® 3021 Electrically Conductive Adhesive
Data provided by Von Roll Isola USA.E-SOLDER® epoxy based resin systems can be used at room temperature on heat sensitive materials, can bond dissimilar materials, and do not have flux or residue t..
Processing Temperature 25.0 °C
77.0 °F
Curing time: 16 hours; Postcure: 2 hours/100°C (212°F)
Abatron AboCast 8-3/Abocure 8-3 Epoxy
2-part solvent-free dielectric epoxy casting compound.Processing: 100/50 ratio (pbw); Gel time, 100 g (3.5 oz.): 265 minutes; cures in 16 hours at 25°C (77°F); postcure: 2 hours at 100°C (212°F)..
Processing Temperature 25.0 °C
77.0 °F
Abatron AboCast/AboCure 8109-10
2-part, clear, slow casting/impregnating dielectric compound. Low dielectric constant, good flexibility and thermocycling properties. Abocast 8502-4 is a red (and other colors), filled version.Pro..
Processing Temperature 25.0 °C
77.0 °F
Abatron AboCast/AboCure 8109-12
1-part, contains latent hardener activated by higher temperature. 4-6 month shelf life at 20-25°C (68-77°F). Other versions available with longer shelf lives and cure cycles.Processing: Potlife:..
Processing Temperature 25.0 °C
77.0 °F
Abatron AboCast/AboCure 8109-6
High heat resistance. Easy to use.Processing: 100/90 pbw; Potlife: 15-20 days/20°C (68°F), 7-10 h/120°C (250°F); mix at RT; cures in: 3 h/100°C (212°F) + 3 h/190°C (375°F) postcure.Applicat..
Processing Temperature 25.0 °C
77.0 °F
Cure 7 days
Aptek 2506-A/B Room temperature curing, low modulus urethane conformal coating
Room temperature curing, low modulus urethane conformal coatingAPTEK 2506-A/B is an unfilled, two component, electrically insulating, transparent, flexible urethane coating system designed for the e..
Copyright © lookpolymers.com All Rights Reserved