Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Dielectric Strength = 508 kV/in Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Electrical Properties Metric English Comments
Dielectric Strength 20.0 - 30.0 kV/mm
508 - 762 kV/in
IEC 60243-1
Raschig Group EN 5007 Epoxy Molding Compound
Mica reinforced molding compound. Low mold shrinkage and post-shrinkage, very good electrical values, outstanding heat resistance, very goo pourablity. This product meets the allowed upper limits fo..
Dielectric Strength 20.0 kV/mm

@Thickness 3.20 mm
508 kV/in

@Thickness 0.126 in
in air; ASTM D 149
SABIC Innovative Plastics Lexan® PPC4701R PPC
High heat resistant polyphthlate carbonate, provides DTUL of 300F at 264 psi. Internal mold release.This data was supplied by SABIC-IP for the Americas region.
Dielectric Strength 20.0 - 40.0 kV/mm

@Temperature 100 - 200 °C
508 - 1020 kV/in

@Temperature 212 - 392 °F
Average value: 27.6 kV/mm Grade Count:3
Overview of materials for Liquid Crystal Polymer (LCP), 50% Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Liquid Crystal Polymer (LCP), 50% Glass Fiber Filled". Specific grades with glass content between 45% an..
Dielectric Strength 20.0 kV/mm
508 kV/in
ASTM D149
Kotec Carbotex K-30UV Polycarbonate, General Purpose, UV Stability Grade
Features: UV stability, Medium viscosity, TransparentApplications: OA equipment, Communications, Precision parts, Machineries, Lighting fixtures, Safety products, E & E parts, Household applications..
Dielectric Strength 20.0 kV/mm
508 kV/in
ASTM D149
Kotec Carbotex KG-30F15 Polycarbonate, Wear Resistant, 30% Glass Fiber Reinforced
Features: Glass fiber 30% reinforced, Mold release, Translucent, Dimensional stability, Non-frictionApplications: OA equipment, Communications, Precision parts, Machineries, E & E partsInformation p..
Dielectric Strength >= 20.0 kV/mm

@Frequency 50.0 Hz
>= 508 kV/in

@Frequency 50.0 Hz
ASTM D149
Iran Petrochemical (PCC) PC 3859 Polycarbonate
Suitable for injection moldingInformation provided by Iran Petrochemical Commercial Co.
Dielectric Strength 20.0 kV/mm
508 kV/in
ASTM D149
Lucky EG-920 Acrylic, Extrusion Grade
Special extrusion grade with excellent stress cracking resistance, intended mainly for exterior applications. May be UV stabilized. General Lucky PMMA qualities: Transparent/elegant appearance, hi..
Dielectric Strength 20.0 kV/mm

@Thickness 2.00 mm
508 kV/in

@Thickness 0.0787 in
ASTM D149
Gromax CCP PBT 1100-600S
Product Description: PBT unreinforced high viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Excell..
Dielectric Strength 20.0 kV/mm

@Thickness 2.00 mm
508 kV/in

@Thickness 0.0787 in
in oil; IEC 60243-1
SABIC Innovative Plastics NORYL WCD801AU PPE-TPE (Asia Pacific)
Flexible, UV stabilized, halogen free extrusion grade for applications such as wire insulation and cable jacket. Good color stability after UV weathering per ASTM D4459. Light color capable. Flame r..
Dielectric Strength 20.0 - 25.0 kV/mm

@Thickness 1.00 mm
508 - 635 kV/in

@Thickness 0.0394 in
ASTM D149
Solvay Specialty Polymers Ajediumâ„¢ PVDF 9009 Polyvinylidene Fluoride (PVDF)
Solef® 9009 PVDF homopolymer is a semi-crystalline fluoropolymer. Solef® film is chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents and alcohols.Fea..
Dielectric Strength 20.0 kV/mm
508 kV/in
ASTM D149
Solvay Specialty Polymers PrimoSpire® PR-250 Polyphenylene, Self-Reinforced (SRP)
PrimoSpire® PR-250 resin is an injection molding grade of self-reinforced polyphenylene (SRP). PrimoSpire® SRP is an ultra-high performance amorphous, melt-processable polymer. The unique prop..
Dielectric Strength 20.0 kV/mm
508 kV/in
ASTM D149
Samyang Tribit® 1500GN30 Polybutylene Terephthalate, 30% Glass Reinforced, Flame Retardant
Characteristics:G/F reinforcedFlame retardantHeat and Impact resistantApplications:AutomotiveConnectorGearOutdoor handleIgnition systemElectronicConnectorGas valveCoil bobbinSwitch caseRelay caseO/A..
Dielectric Strength <= 20.0 kV/mm
<= 508 kV/in
IEC 60243
Borealis Borstar® LE8706 Natural Bimodal LLDPE Jacketing Compound for Energy and Communication Cables
Borstar® LE8706 is a natural colorable linear low density (LLD) jacketing compound, which is produced with the Borealis proprietary Borstar® bimodal process technology. Borstar technology allows ..
Dielectric Strength 20.0 kV/mm
508 kV/in
IEC 60243-1
Polyplastics Duranex® 3105H Polybutylene Terephthalate (PBT), Standard, 15% GF filled
DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers ..
Dielectric Strength 20.0 kV/mm
508 kV/in
Dry, ASTM D149
Von Roll Isola IMI Transtherm® T 400-9 Silicone Elastomer, Fiberglass Reinforced, Aluminum Oxide Filled, for Thermal Management
Data provided by Von Roll Isola USA.Transtherm thermal management products are used as an interface between a heat generating device and the heat sink to minimize thermal resistance and to provide e..
Dielectric Strength 20.0 kV/mm
508 kV/in
VDE 0303/4
Polyram RamTal PM3009G5 Acetal, 25% Glass Fiber
25% Glass fiber reinforced polyacetal for injection molding applications.Information provided by Polyram Ram On Ind.
Dielectric Strength 20.0 kV/mm
508 kV/in
VDE 0303/4
Polyram RamTal PM3013G4 Acetal, 20% Glass Fiber
20% Glass fiber reinforced polyacetal for injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 20.0 kV/mm
508 kV/in
IEC 60243-1
Polyplastics Duranex® 3316 Polybutylene Terephthalate (PBT), Standard, FR, UL approved regrind 50%, 30% GF filled
DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers ..
Dielectric Strength 20.0 kV/mm
508 kV/in
IEC 60243-1
DSM Akulon® K222-D Nylon 6 (European and Asian Grade) (Cond)
The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Dielectric Strength 20.0 kV/mm
508 kV/in
IEC 60243-1
DSM Arnitel® PM381 Polyether Ester Elastomer (European Grade)
Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn..
Dielectric Strength 20.0 kV/mm
508 kV/in
IEC 60243-1
DSM Stanyl® TE250F9 Nylon 46-45% Glass Reinforced (European and Asian Grade) (Cond)
Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper..
Dielectric Strength 20.0 kV/mm
508 kV/in
cond; IEC 60243-1
DSM Stanyl® TS250F8 PA46-GF40 FR
40% Glass Reinforced, Flame Retardant, Heat Stabilized
Dielectric Strength 20.0 kV/mm
508 kV/in
AC Rapid Rise; ASTM D149
DuPont™ Nomex® E56 Paper, 15 mil Nominal Thickness
Nomex® Type E56 is designed for cost critical uses which require lesser amounts of mechanical and electrical strength than other Nomex® grades. It is thermally similar to Nomex® Type 410 but as..
Dielectric Strength 20.0 kV/mm

@Thickness 3.20 mm
508 kV/in

@Thickness 0.126 in
in oil; IEC 60243-1
Eurostar Staramide AG6K PA66, 30% Glass Filled, Injection Molded
AG6 is a Heat and Hydrolytically Stabilized, 30% Glass Fiber Reinforced Polyamide 66 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive suppli..
Dielectric Strength 20.0 kV/mm

@Thickness 3.20 mm
508 kV/in

@Thickness 0.126 in
in oil; IEC 60243-1
Eurostar Starflam AFR662B1 PA66, Mineral Reinforced, Flame Retardant, Injection Molding
Starflam AFR662B1 is a Flame Retardant, Mineral Filled Polyamide 66, Injection Molding ResinInformation provided by Eurostar.
Dielectric Strength 20.0 kV/mm
508 kV/in
IEC 60243-1
Celanese CELANEX 4300 PBT, 30% Glass Reinforced
Celanex 4300 is a toughened, 30% glass reinforced PBT.Information provided by Celanese
Dielectric Strength 20.0 kV/mm
508 kV/in
IEC 60243
Azoty Tarnow™ TARNOFORM 300 HI6 POM
Rubber modified grade with very high impact strength and damping capacity.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
Dielectric Strength >= 20.0 kV/mm
>= 508 kV/in
IEC 60243
Borealis LE6022 Polyethylene Modified Jacketing Compound
LE6022 is a black low density copolymer modified polyethylene compound. It is characterized by excellent crack resistance and mechanical properties and low temperature performance in combination wit..
Dielectric Strength 20.0 kV/mm
508 kV/in
IEC 60243
Borealis LE6025 Polyethylene Modified Jacketing Compound
LE6025 is a black low density copolymer modified polyethylene compound. It is characterized by excellent stress crack resistance and mechanical properties and low temperature performance in combinat..
Dielectric Strength 20.0 kV/mm

@Thickness 2.00 mm
508 kV/in

@Thickness 0.0787 in
ASTM D149
Gromax PBT 4115-201D 15% Glass Fiber Filled
Product Description: A glass fiber 15% reinforced injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature Excellent ..
Copyright © lookpolymers.com All Rights Reserved