Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 10.0 min | 0.167 hour | With Primer (Fixture) |
ND Industries 460 Instant High Pressure Pipe Sealant High temperature, high strength general purpose stainless steel and other inert metals. For metal fittings |
|||
Cure Time | 10.0 min @Temperature 120 °C |
0.167 hour @Temperature 248 °F |
|
Resin Technology Group 451 Oxy-Bond™ Electrically Conductive Epoxy Adhesive Oxy-Bond and Millenium Adhesive SystemsEngineered for strength, durability, lightness, and formability, our Oxy-Bond and Millenium lines offer adhesives with physical and electrical properties to ma.. |
|||
Cure Time | 10.0 min @Temperature 160 °C |
0.167 hour @Temperature 320 °F |
|
TSE Industries Millathane® 97 Millable Polyester Polyurethane Rubber, Hardness 95A Millathane 97 is a polyether polyurethane rubber having excellent transparency, good wear properties, a high coefficient of friction and very good UV stability. This polyurethane rubber is designed .. |
|||
Cure Time | >= 10.0 min @Temperature 120 °C |
>= 0.167 hour @Temperature 248 °F |
|
Resin Technology Group TIGA 951 One-Part Silver Conductive Epoxy System Cure 10 minutes at 120°CTIGA 951 is an electrically conductive, silver-filled epoxy adhesive recommended for electronic bonding and sealing applications. This one-part, smooth paste formulation of .. |
|||
Cure Time | 10.0 - 15.0 min | 0.167 - 0.250 hour | Fixture time |
ITW Devcon Composite Welderâ„¢ Methacrylate Adhesive FS, Blue Green, Black Information provided by ITW Devcon |
|||
Cure Time | 10.0 min @Temperature 25.0 °C |
0.167 hour @Temperature 77.0 °F |
|
Henkel Frekote 700-NC Mold Release Agent A non-CFC, semi permanent, multiple release polymer resin that effectively releases all thermoset resins. Versatile agent that provides slip where mold geometry problems are encountered. Cures at r.. |
|||
Cure Time | 10.0 min @Temperature 25.0 °C |
0.167 hour @Temperature 77.0 °F |
|
Henkel Frekote 770-NC Mold Release Agent A non-CFC, semi permanent, multiple release polymer resin that effectively releases all thermoset resins. Versatile agent that provides slip where mold geometry problems are encountered. Rapid dry a.. |
|||
Cure Time | 10.0 min @Temperature 120 °C |
0.167 hour @Temperature 248 °F |
Press Cure |
Shin-Etsu Silicones LIMSâ„¢ KE2090-70AB Elastomer KE-2090-70 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. Its viscosity is lo.. |
|||
Cure Time | 10.0 min | 0.167 hour | |
Shin-Etsu Silicones SV-55002U High Strength Silicone Elastomer SV55002U is one of a series of silicone bases Type of HCR designed for applications requiring high strength. Product Features: Excellent mechanical properties.Typical Applications: Molding and Extru.. |
|||
Cure Time | 10.0 min | 0.167 hour | |
Loctite® 3292 Acrylic Bonding Adhesive Acrylic Bonding AdhesivesLoctite® Acrylic Adhesives were developed for bonding applications that require tensile, shear and peel strength combined with maximum impact, stress and shock resistance. .. |
|||
Cure Time | 10.0 min @Temperature 68.3 °C |
0.167 hour @Temperature 155 °F |
Press cured |
TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 20 PHR N990 (MT) Filler MILLATHANE E34 is a high performance polyether polyurethane rubber for applications requiring: high abrasion resistance, low temperature flexibility, ozone resistance, oil and fuel resistance, outst.. |
|||
Cure Time | 10.0 min @Temperature 68.3 °C |
0.167 hour @Temperature 155 °F |
Press cured |
TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 40 PHR N330 (HAF) Filler MILLATHANE E34 is a high performance polyether polyurethane rubber for applications requiring: high abrasion resistance, low temperature flexibility, ozone resistance, oil and fuel resistance, outst.. |
|||
Cure Time | 10.0 min @Temperature 68.3 °C |
0.167 hour @Temperature 155 °F |
Press cured |
TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 40 PHR N990 (MT) Filler MILLATHANE E34 is a high performance polyether polyurethane rubber for applications requiring: high abrasion resistance, low temperature flexibility, ozone resistance, oil and fuel resistance, outst.. |
|||
Cure Time | 10.0 min @Temperature 155 °C |
0.167 hour @Temperature 311 °F |
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 20 PHR Carbon Black, N-330 (HAF) Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m.. |
|||
Cure Time | 10.0 min @Temperature 154 °C |
0.167 hour @Temperature 309 °F |
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 20 PHR Carbon Black, N-550 (FEF) Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m.. |
|||
Cure Time | 10.0 min @Temperature 154 °C |
0.167 hour @Temperature 309 °F |
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 40 PHR Carbon Black, N-550 (FEF) Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m.. |
|||
Cure Time | 10.0 min @Temperature 155 °C |
0.167 hour @Temperature 311 °F |
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 40 PHR Non-Black, Aerosil 200 Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m.. |
|||
Cure Time | 10.0 min | 0.167 hour | |
Loctite® 271 High Strength Threadlocker ThreadlockersInvented by Loctite Corporation as a revolutionary method to lock and seal threaded fasteners, Loctite® Liquid Threadlockers have found wide acceptance in a range of applications--from.. |
|||
Cure Time | 10.0 min @Temperature 68.3 °C |
0.167 hour @Temperature 155 °F |
Press cured |
TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 60 PHR N330 (HAF) Filler MILLATHANE E34 is a high performance polyether polyurethane rubber for applications requiring: high abrasion resistance, low temperature flexibility, ozone resistance, oil and fuel resistance, outst.. |
|||
Cure Time | 10.0 min @Temperature 150 °C |
0.167 hour @Temperature 302 °F |
|
Epoxy Technology EPO-TEK® 320-3 Optically Opaque Epoxy Material Description: A two component, black-colored and optically opaque epoxy designed for optical, medical, and opto-electronic packaging of semiconductor devices and components. It is a modific.. |
|||
Cure Time | 10.0 min @Temperature 162 °C |
0.167 hour @Temperature 324 °F |
|
Cotronics Duralco™ 127 400°F (200°C) Graphite Filled Epoxy One component, graphite filled epoxy for low cost production applications. Can be used with automatic dispensing equipment. |
|||
Cure Time | 10.0 min | 0.167 hour | Tack free, RT @ 50%RH |
3M IC 15WB+ Fire Barrier Sealant 3M Fire Barrier Sealant IC 15WB+ is a cost-effective, one-part, gun-grade, latex-based, intumescent firestop sealant that dries to form a monolithic firestop seal that also acts as a barrier to airb.. |
|||
Cure Time | 10.0 - 20.0 min | 0.167 - 0.333 hour | Time to Handling Strength |
3M Scotch-Weld™ DP810NS Structural Adhesive 3M™ Scotch-Weld™ Low-Odor Acrylic Adhesives are two-part, 1:1 mix ratio, toughened structural adhesives with less odor than most acrylic adhesives. The adhesives have excellent shear and peel stre.. |
|||
Cure Time | 10.0 min | 0.167 hour | Tack free, RT @ 50%RH |
3M FD 150+ Fire Barrier Sealant 3M Fire Barrier Sealant FD 150+ is an economical, ready to use, gun-grade, elastomeric sealant that dries to from a monolithic flexible firestop seal. 3M Fire Barrier Sealant FD 150+ firestops joint.. |
|||
Cure Time | 10.0 min @Temperature 155 °C |
0.167 hour @Temperature 311 °F |
|
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 20 PHR Non-Black, Precipitated Calcium Carbonate Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m.. |
|||
Cure Time | 10.0 min @Temperature 68.3 °C |
0.167 hour @Temperature 155 °F |
|
TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 2.0 PHR MBT MILLATHANE E34 is a high performance polyether polyurethane rubber for applications requiring: high abrasion resistance, low temperature flexibility, ozone resistance, oil and fuel resistance, outst.. |
|||
Cure Time | 10.0 min | 0.167 hour | |
Loctite® Quick Metal® 660 Retaining Compound RetainersLoctite Corporation, the pioneer of anaerobic adhesives, has applied this technology to create retaining compounds that increase the shear strength of cylindrical, non-threaded assemblies. .. |