- HOME
- POLYMER SEARCH
- Glass
- Glass Ceramic
- Möller Medical PolySkin 78 M NanoCoating
Möller Medical PolySkin 78 M NanoCoating
| Category | Ceramic , Glass , Glass Ceramic , Other Engineering Material , Ceramic/Metallic Coating |
| Manufacturer | Moeller Medical (Möller Medical) |
| Trade Name | PolySkin |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Möller Medical PolySkin 78 M NanoCoating.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Decorative coating in "metallic look," hardening at room temperature up to 80°C.Information provided by Möller Medical, Member of CENTROTEC Group
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Thickness | 3.00 - 10.0 microns | 0.118 - 0.394 mil |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Taber Abrasion, mg/1000 Cycles | 44 | 44 | CS17 friction disc with 500g load; DIN 53754 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 200 °C | 392 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 25.0 - 80.0 °C | 77.0 - 176 °F | Hardening Temperature |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Applicable Substrate | ABS | with restrictions |
| Aluminum | ||
| Brass | ||
| Copper | ||
| Glass | ||
| Nylon | with restrictions | |
| PMMA | with restrictions | |
| Polycarbonate | with restrictions | |
| Stainless Steel | ||
| Contact Angle to Water [deg] | 78 | |
| Cupping Test [mm] | 8.4 | DIN EN ISO 1520 |
| Non-Applicable Substrate | Tubes int. dia. 0.1-10 mm | |
| Pendulum Dampening Test [sec] | 160-180 | DIN EN ISO 1522 |
Users viewing this material also viewed the following:
- Nye Lubricants NPE-UC9 Oil
- Quadrant EPP TIVAR® 1000 EC PE-UHMW + specific additives (ISO Data)
- SABIC Innovative Plastics Ultem PW2400 PEI (Europe-Africa-Middle East)
- ExxonMobil 10W-30 Exxon XD-3
- TIMCAL TIMREX® T200-2000 Primary Synthetic Graphite
- Trelleborg Horda Cable E7355-A4 Strippable Semiconductive Shielding
- ChevronTexaco ISO 150 Ultra Gear Lubricant
- Eurostar Staramide ACF2 PA66, 10% Carbon Fiber Reinforced, Heat stabilized, Injection Molding
- Braskem H 107 Coating Polypropylene
- Ashley Polymers Ashlene® 266 PPO, 30% Glass Reinforced
Copyright © lookpolymers.com All Rights Reserved