Processing Properties | Metric | English | Comments |
---|---|---|---|
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese Celcon® WR25Z POM, UV Resistant
(Unverified Data**) Celcon® WR25Z is a 2.5 nominal melt flow rate based acetal copolymer stabilized to provide maximum ultraviolet radiation resistance in outdoor applications. Celcon® WR25Z is a lower flow product .. |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese Hostaform® AM90S POM, Specialty
(Unverified Data**) Hostaform® acetal copolymer grade AM90S is a standard melt flow acetal copolymer grade containing an antimicrobial ingredient. Hostaform® AM90S provides the same physical and mechanical performan.. |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese Hostaform® C 13031 K POM, Tribological
(Unverified Data**) Chemical abbreviation according to ISO 1043-1: POMInjection molding grade with moderate flow and higher strength, rigidity and hardness, with special chalk modifiedInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese Hostaform® C 2521 LS POM, UV Resistant
(Unverified Data**) Stiff-flowing grade for injection molding and extrusion, UV resistantInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese Hostaform® C 9021 GV1/30 POM, 30% Glass Reinforced
(Unverified Data**) Chemical abbreviation according to ISO 1043-1: POMInjection molding grade, reinforced with ca. 26 % glass fibersInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese Hostaform® C 9021 S1 POM, Tribological
(Unverified Data**) modified with silicon oilInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese VECTRA E130i LCP, 30% Glass Reinforced
(Unverified Data**) High temperature capability, easiest flow. Suitable where very thin walls are required. Used for broad range of SMT applications, with minimal dimensional change. 30% glass filled.30% glass fiber, e.. |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese VECTRA V143XL LCP, 42% Glass Reinforced
(Unverified Data**) LCP/PPS blend. Maintains most of the characteristics of E130i with improved weldline strength and flatness in certain geometries. 40% glass reinforced.LCP/PPS Blend, 40% glass reinforcedA three-zo.. |
|||
Processing Temperature | 80.0 °C | 176 °F | Cure Schedule: 2 hrs @ 80ºC or 2 hrs @ 150°C |
Huntsman HY 5200 Aromatic Amine Approx. H+ equivalent weight 45. Mix Ratio with GY 6010 is 23.Comments/Applications: Liquid aromatic amine.Data provided by Ciba Specialty Chemicals.Ciba Specialty Chemicals has been acquired by H.. |
|||
Processing Temperature | 80.0 - 90.0 °C @Time 1800 sec |
176 - 194 °F @Time 0.500 hour |
|
Henkel Turco Scale Gon 7 Jet Engine Cleaner Turco Scale Gon 7 is an acid-activated, yellow liquid used in the Turco Jet Engine Process to condition and remove high temperature scale from jet engine parts. Approved by Rolls-Royce.Application: .. |
|||
Processing Temperature | 80.0 °C | 176 °F | Hopper Throat |
BASF Ultradur® B 4560 PBT Description: Medium viscosity injection molding grade for industrial parts in the automotive field, for example for head lamp bezel. Suitable for direct metalizing.Information provided by BASF |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Hostaform® LM90 POM, Specialty Hostaform« LM90 is a nominal 9 melt flow rate acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform« LM90 can be laser marked with barcodes, identif.. |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Hostaform® UV90Z XAP2 ™ POM, UV Resistant Preliminary Data SheetInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese VECTRA A150 LCP, 50% Glass Reinforced Improved creep resistance over A130. May reduce warpage in some parts compared to A130. 50% glass reinforced.50% glass fiber, improved creep resistance over A130A three-zone screw evenly divided int.. |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese VECTRA E115i LCP, 15% Glass Reinforced 15% glass reinforcedInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese VECTRA E130i LCP, 30% Glass Reinforced High temperature capability, easiest flow. Suitable where very thin walls are required. Used for broad range of SMT applications, with minimal dimensional change. 30% glass filled.Information provid.. |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese VECTRA E845i LDS LCP, 40% Mineral / Glass Reinforced LDS capable LCP with higher DTUL and impactInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 130 °C | 176 - 266 °F | cavity |
Celanese VECTRA FIT30 LCP, 43% Mineral / Glass Reinforced 43% glass and mineral reinforced grade.Glass and mineral filled grade, high flow and low warpage.Information provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Celcon® CF802 POM, Specialty Celcon« acetal copolymer grade CF802 is a conductive, fuel compatible general purpose acetal copolymer. Celcon« CF802 has been developed to dissipate static electricity from fuel handling systems... |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Celcon® M25UV POM, UV Resistant Celcon« M25UV is an acetal copolymer developed as a natural UV light stabilized low flow, high molecular weight grade. It has been formulated as a natural acetal that does not discolor, yet maintai.. |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Celcon® M450 POM, Unfilled Celcon« acetal copolymer grade M450 is an extremely low viscosity grade for optimal cycle performance in very thin walls or long, narrow flow paths in injection molding.Information provided by Cela.. |
|||
Processing Temperature | 80.0 - 100 °C | 176 - 212 °F | cavity |
Celanese Celstran® PA66-GF50-02-US Nylon 66, 50% Glass Reinforced 50 % Long glass fiber reinforced, heat stabilized, Nylon 6/6Information provided by Celanese |
|||
Processing Temperature | 80.0 - 100 °C | 176 - 212 °F | cavity |
Celanese Hostaform® HS15 POM, Unfilled Drying is not normally required.Information provided by Celanese Corporation. |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | Cavity temperature |
Celanese Hostaform® C 9021 M XAP²™ POM, Tribological
(Unverified Data**) POM copolymerwith molybdenum disulphide modified, low emissionInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Hostaform® C 27021 XAP² ™ LS colored POM, UV Resistant PolyacetalcopolymerInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Hostaform® C 9021 GV3/10 POM, 10% Glass Reinforced Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Hostaform® C 9021 TF XAP² ™ POM, Tribological Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Hostaform® CF802 10/9022 POM, Specialty Hostaform« acetal copolymer grade CF802 10/9022 is a conductive, fuel compatible general purpose acetal copolymer. Hostaform« CF802 10/9022 has been developed to dissipate static electricity from .. |
|||
Processing Temperature | 80.0 - 120 °C | 176 - 248 °F | cavity |
Celanese Hostaform® MT® SlideX™ 2404 POM, Medical Technology POM copolymerInformation provided by Celanese |
|||
Processing Temperature | 80.0 °C | 176 °F | Hopper Throat |
BASF Ultramid® B3WG5 BK 00654 PA6 25% Glass Filled BK (Dry) Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el.. |