Thermal Properties | Metric | English | Comments |
---|---|---|---|
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Recommended |
Nye Lubricants 227(SO) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Recommended |
Nye Lubricants 361F (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Precision Polymer Engineering S50Y Silicone Rubber Yellow Silicone Rubber, 45-55 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain.Applications: Excellent heat resistance and low temperature flexibility. U.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering S60R Silicone Rubber Red Silicone 55-65 °IRHD. Diesel cylinder liner ring grade. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ.Applications: Excell.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Precision Polymer Engineering S60Z Silicone Rubber Grey Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Fo.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Precision Polymer Engineering S70H Silicone Rubber White Silicone Rubber, 68-78 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States F.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Precision Polymer Engineering S70Z Silicone Rubber Grey Silicone Rubber, 66-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Fe.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering S72R Silicone Rubber Orange Silicone Rubber, 65-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States .. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering S75T Silicone Rubber Translucent Silicone Rubber, 66-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ. Silicone compound in conformity with.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
NextGen Adhesives P907-12 Fiber Optic Adhesive Description: NGAC P907-12 is a rapid curing, low viscosity, heat cured epoxy adhesive system that is specifically formulated for use in the fiber optic industry.Advantages and Applications: Uses inc.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Continuous use |
P & P Technology Silicone Sponge The thermal stability of silicone rubber is probably its most important asset. Components made from these rubbers are affected only to a small extent by extremes of temperature, ranging from –90°C.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | 1 hour duration |
Parker Chomerics Tecknit Teckshield®-F 100 OPI 0.001" Diameter Wire, Allycarbonate EMI Shielding Window Description: Tecknit Allylcarbonate shielded windows are manufactured by casting a woven EMI shield mesh into a material that has optical properties similar to that of glass. The window offers a lig.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Parker Chomerics Tecknit Teckshield®-F 50 OPI 0.001" Diameter Wire, Allycarbonate EMI Shielding Window Description: Tecknit Allycarbonate shielded windows are manufactured by casting a woven EMI shield mesh into a material that has optical properties similar to that of glass. The window offers a ligh.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Resin Technology Group 1105 Oxy-Bond™ Two-Component Epoxy Adhesive Oxy-Bond and Millenium Adhesive SystemsEngineered for strength, durability, lightness, and formability, our Oxy-Bond and Millenium lines offer adhesives with physical and electrical properties to ma.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Resin Technology Group FDA-24N Two component Polyurethane Adhesive Resin Technology Group FDA-24N Two component Polyurethane AdhesiveFDA approvable, 1:1 ratio, general purpose adhesive |
|||
Minimum Service Temperature, Air | <= -60.0 °C | <= -76.0 °F | |
Kazanorgsintez 158BK-15 Low Density Polyethylene Composite Production Method: Produced from low density polyethylene grades 15803-020 and 15813-020. Application: Designed for production of sealing coatings on industrial items.Information Provided by Kaz.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Freudenberg Simrit F40 Fluorosilicone Elastomer Combines excellent low-temperature performance of silicone with improved chemical resistance. Very good resistance to military and aerospace fuels. Excellent performance in oxygen plasma environment.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Fujipoly Industries Sarcon® 45T Thin-Film TR Sarcon TR is Fujipolys originally developed High Heat Conductive Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Sarcon GTR is a composite of .. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Continuous useful temperature. |
Momentive Performance Materials TSE3941 White Adhesive Sealant, Fast Cure Paste One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Flame retardant, no.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Tra-Con Tra-Bond F110 Optically Transparent Low Viscosity Epoxy Adhesive TRA-BOND F110 is a rigid, optically clear adhesive with a very low viscosity. This room temperature curing system is an excellent choice for thin bond-line assembly and repair applications of prisms.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Tra-Con Tra-Bond F118CLR Fiber Optic Epoxy Adhesive TRA-BOND F118CLR is an impact resistant, fiber-optic adhesive designed for use in any optical connector. This two-part epoxy remains at a constant viscosity for a minimum of 30 minutes. This allows .. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Tra-Con Tra-Bond F123NC High Temperature Fiber Optic Epoxy Adhesive TRA-BOND F123 NC is a fast cure, low viscosity, two-component epoxy formulation for bonding fiber optic bundles, potting glass fibers, and/or terminating single or multi-channel fiber optic connecto.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
AlphaGary Evoprene™ 007 Standard SBS Thermoplastic Elastomer Compound The Evoprene™ Standard is a styrene-butadiene -styrene based thermoplastic elastomer.Applications: extruded door, window and furniture seals and rubbing strips, mats, bump stops, grommets, coat han.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
AlphaGary Evoprene™ 047 Standard SBS Thermoplastic Elastomer Compound The Evoprene™ Standard is a styrene-butadiene -styrene based thermoplastic elastomer.Applications: extruded door, window and furniture seals and rubbing strips, mats, bump stops, grommets, coat han.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
3M 434/Silver Damping Foils Low temperature vibration dampingInformation provided by 3M |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Atom Adhesives AA-BOND F131 Epoxy Adhesive AA-BOND F131 is two parts fiber-optic adhesive used for terminating ALL types of fiber-optic connectors as well as LED displays, lenses and other optical components. AA-BOND F131 produces a typical .. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Tra-Con Tra-Bond 2130 Medium Viscosity Epoxy Adhesive TRA-BOND 2130 is a clear, near transparent, medium viscosity epoxy adhesive formulation developed for rigid laminating, sealing and bonding applications where the combination of good wetting plus im.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
AlphaGary Evoprene™ 003 Standard SBS Thermoplastic Elastomer Compound The Evoprene™ Standard is a styrene-butadiene -styrene based thermoplastic elastomer.Applications: extruded door, window and furniture seals and rubbing strips, mats, bump stops, grommets, coat han.. |
|||
Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | |
Resinlab® UR3005 Two Part Urethane Elastomer Resinlab™ UR 3005 is a two component, room temperature curing polybutadiene polyurethane casting and potting system. It is designed to cure completely at room temperature. UR 3005 provides excellen.. |
|||
Minimum Service Temperature, Air | -60.0 - -50.0 °C | -76.0 - -58.0 °F | |
AlphaGary Evoprene™ GC 5685 SEBS Thermoplastic Elastomer Evoprene™ GC compounds are based on styrene ethylene- butylene styrene block copolymers. Evoprene™ GC series was created to provide cost effective solutions for processors and end users alike. Can.. |