Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 153 °C | 307 °F | ASTM D1525B |
SABIC PP 510P Polypropylene Homopolymer for Fiber Applications Product Description: PP 510P is a homopolymer specially designed for fiber extrusion applications with the following features:Consistent processabilityGood thread line stabilityGood color consisten.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate A; ISO 306/A50 |
Premix Thermoplastics PRE-ELEC® PP 1373 PRE-ELEC PP 1373 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELE.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Lexan® 241RX PC (Europe-Africa-Middle East) LEXAN 241RX is a medium viscosity multi purpose grade and contains a release agent to ensure easy processing. This grade is UL94-V2 at 0.75 mm and allows for the molder to use up to 50 percent regri.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® AD143 PC LEXAN AD143 is a medium viscosity, injection molding grade exhibiting low dust attraction. It is designed for applications with high optical requirements in terms of clarity and light transmission .. |
|||
Vicat Softening Point | 153 °C | 307 °F | ASTM D1525 |
PolyMirae Moplen EP648N Injection Molding Grade Polypropylene Moplen EP648N is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP648N is a high gloss block copolymer particularly suitable fo.. |
|||
Vicat Softening Point | 153 °C | 307 °F | ASTM D1525 |
PolyMirae Moplen HP524J BDDP Film Grade Polypropylene Moplen HP524J is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP524J is a homopolymer particularly suitable for BOPP (Tender) fil.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Lexan® HP3AEU PC (Europe-Africa-Middle East) Lexan HP3AEU resin is a medium flow polycarbonate with mold release designed for medical devices and pharmaceutical applications. It is assessed with biocompatible ISO10993 (or USP Class VI) and is.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Lexan® HP4R PC (Asia Pacific) Medium flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. Contains a hig.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Lexan® HP4R PC (Europe-Africa-Middle East) Medium flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. Contains a hig.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Lexan® OQ3420 PC (Europe-Africa-Middle East) Medium Viscosity, UV-stabilized grade for ophthalmic lenses. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Lexan® 144R PC (Europe-Africa-Middle East) Medium viscosity, multi purpose polycarbonate resin with added release agent. Food contact approved in limited colors. Effective January 15th, 2007 this grade will no longer be supported with bioc.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Lexan® 4301 PPC+PC Lexan 4301 is a high heat resistant poly (ester) carbonate resin for injection moldingThis data was supplied by SABIC-IP for the Americas region. |
|||
Vicat Softening Point | 153 °C | 307 °F | ASTM D1525 |
PolyMirae Moplen HP425J BDDP Film Grade Polypropylene Moplen HP425J is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. MIRAEPOL T28C is a homopolymer particularly suitable for BOPP (Tender) fil.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Lexan® HP4 PC Medium flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. Contains mol.. |
|||
Vicat Softening Point | 153 °C @Load 1.00 kg |
307 °F @Load 2.20 lb |
ASTM D1525 |
LG Chemical SEETEC H1500 Polypropylene Homopolymer Features: SEETEC H1500 is a high flow homopolymer suitable for injection molding applications. SEETEC H1500 exhibits a high flowability combined with a good mechanical property balance. SEETEC H1500.. |
|||
Vicat Softening Point | 153 °C | 307 °F | A120; ISO 306 |
Inno-Comp INNOPOL® CS 1-2140 BLH 40% Talc-Filled Polypropylene Homopolymer INNOPOL® CS 1-2140 BLH is recommended especially for producing products, where high stiffness, low shrinkage, long term heat stability and excellent processability are required.All information pr.. |
|||
Vicat Softening Point | 153 °C | 307 °F | ASTM D1525-97 |
Ipiranga Petrochem PH 1310 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
Vicat Softening Point | 153 °C | 307 °F | 50°C/h 50N; ISO 306 |
Mitsubishi Xantar® G8F 23 UR Polycarbonate-40% Glass Reinforced Xantar® materials are engineered for performance, consistency and reliability. This makes Xantar® resins ideal for interior automotive components, electrical equipment and consumer appliances .. |
|||
Vicat Softening Point | 153 °C @Load 1.02 kg |
307 °F @Load 2.25 lb |
ASTM D1525 |
Total PPH 3576 BB Polypropylene Homopolymer, Cast Film Polypropylene 3576 BB is recommended for use in non-oriented cast films processes. It contains an optimized level of slip and anti-block additives.3576 BB is intended for food, magazine or textile .. |
|||
Vicat Softening Point | 153 °C | 307 °F | -1kg; ASTM D1525 |
Braskem H 107 Coating Polypropylene Description: H 107 is a ultra-high melt flow rate additivated homopolymer used for general purposes. Designed for extrusion coating. This product exhibits excellent processability, good melt stabili.. |
|||
Vicat Softening Point | 153 °C @Load 1.02 kg |
307 °F @Load 2.25 lb |
ASTM-D1525 |
Braskem PH 0242 HOMO Polypropylene Homopolymer PH 0242 is a low melt flow rate homopolymer produced by compression molding. This resin exhibits excellent processability and excellent stiffness/impact strength balance. Its applications include co.. |
|||
Vicat Softening Point | 153 °C | 307 °F | ISO 306/A50 |
Addiplast Addilene H 140 Polypropylene Homopolymer Unreinforced, low flow for injection and extrusion, very translucentInformation provided by Addiplast. |
|||
Vicat Softening Point | 153 °C | 307 °F | ISO 306/A50 |
Addiplast Addilene H 410 Polypropylene Homopolymer UnreinforcedInformation provided by Addiplast. |
|||
Vicat Softening Point | 153 °C | 307 °F | ISO 306/A50 |
Addiplast Addilene H 555 Y7 Polypropylene Homopolymer Good surface appearance, high temperature resistanceInformation provided by Addiplast. |
|||
Vicat Softening Point | 153 °C @Load 1.02 kg |
307 °F @Load 2.25 lb |
ASTM D1525 |
Carmel Olefins CAPILENE® W 77 AV Polypropylene Homopolymer CAPILENE® W 77 AV is a very high melt flow rate polypropylene homopolymer for injection molding with antistatic and nucleating additives. It offers a good balance of stiffness and flow, high de-mol.. |
|||
Vicat Softening Point | 153 °C | 307 °F | ISO 306/A50 |
Addiplast Addilene H 210 Polypropylene Homopolymer UnreinforcedInformation provided by Addiplast. |
|||
Vicat Softening Point | 153 °C | 307 °F | ISO 306/A50 |
ExxonMobil PP1364E2 Polypropylene Homopolymer Product Description: A medium melt flow homopolymer resin suitable for masterbatch carrier and other compounding applications and for the molding of garden furniture, caps and other consumer produc.. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Lexan® FXG154 PC (Asia Pacific) FXG154 is a Lexan PC grade with the Diamond effect. Color Package may affect properties, Application testing always recommended. |
|||
Vicat Softening Point | 153 °C | 307 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Lexan® ML144R PC (Europe-Africa-Middle East) Medium viscosity, multi purpose polycarbonate resin with added release agent. Food contact approved in limited colors. Effective January 15th, 2007 this grade will no longer be supported with bioc.. |
|||
Vicat Softening Point | 153 °C | 307 °F | -1kg; ASTM D1525 |
Braskem H 606 Thermoforming Polypropylene Description: H 606 is low melt flow rate homopolymer with general purpose additive package. This resin is designed for extrusion and thermoforming. H 606 presents excellent processability and high o.. |