- HOME
- POLYMER SEARCH
- Polymer Property : Tear Strength = 24.5 kN/m
Polymer Property : Tear Strength = 24.5 kN/m Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tear Strength | 24.5 kN/m | 140 pli | ASTM D624 |
| Multibase Multi-Flex® TPE A 6821 NAT This product is based on Kraton G and PP. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
| Tear Strength | >= 24.5 kN/m | >= 140 pli | ASTM D624 |
| Multibase Multi-Flex® TPE A 7606 BLK The burn rate is 1.2 in/min (30 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Die B, no post cure- press cured for 5 minutes; ASTM D624 |
| Multibase SILASTIC® 7-6830 Dow-Corning Biomedical Grade Liquid Silicone Rubber Information provided by Multibase |
|||
| Tear Strength | 24.5 kN/m | 140 pli | ASTM D412 |
| Multibase TPSiV™ 3010-50A Thermoplastic Silicone Vulcanizate These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | ASTM D624 |
| PolyOne Versaflex™ OM 9-802CL Thermoplastic Elastomer (TPE) Versaflex™ OM 9-802CL is a clear, soft touch TPE designed to bond to the following thermoplastics: PC, ABS, PC/ABS and copolyester. New Product. Commercial specifications have not been established... |
|||
| Tear Strength | 24.5 kN/m | 140 pli | ASTM D624 |
| PolyOne Dynaflex™ G7960-1 NSFG Thermoplastic Elastomer (TPE) Dynaflex™ G7960-1 NSFG is a NSF 51 (food equipment) approved material suitable for a wide variety of applications. -NSF 51 approved -FDA (see Notes) -Overmold Adhesion to Polypropylene -Soft Touch,.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | ASTM D624 |
| PolyOne Dynaflex™ G7960-1001-00 Thermoplastic Elastomer (TPE) Dynaflex™ G7960-1001-00 is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polypropylen.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Certified |
| NuSil MED-4720 Two-Part Standard High Consistency Elastomers - Unrestricted Medical Use Description: High consistency rubber, or HCR, consists of high molecular weight polymer combined with silica to produce a material that can be molded, extruded, or calendared into a useful end produ.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Typical |
| NuSil MED-4725 Two-Part Standard High Consistency Elastomers - Unrestricted Medical Use Description: High consistency rubber, or HCR, consists of high molecular weight polymer combined with silica to produce a material that can be molded, extruded, or calendared into a useful end produ.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | die C; ASTM D624 |
| PB1100-55 Polyurethane-based Biomedical Elastomer |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Typical |
| NuSil MED-4120 Silicone, One Part High Consistent Elastomer - Restricted Medical Use Description: HCRs can be used for extrusion of tubing and profiles (rod or ribbon), in calendared sheeting for die-cutting, or in compression or transfer molded parts such as balloons, gaskets or o-.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | DIN ISO 34-1 |
| Kraiburg TPE For-Tec E OC6OAZ Thermoplastic Elastomer, Adhesion to PA The AD/PAX/MR Series is recommended for two-component-seals in electronic applications and soft touch grips and handles of machine tools. The material provides an excellent resistance to skin oils, .. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | DIN ISO 34-1 |
| Kraiburg TPE THERMOLAST® K TF7THT Thermoplastic Elastomer, high transparency The FC/ht Series is a highly transparent material solution for applications with food contact. The series is characterized, among other things, by its excellent adhesion to PP. Typical applications:.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | DIN ISO 34-1 |
| Kraiburg TPE THERMOLAST® K TP8VCN Thermoplastic Elastomer, Adhesion to PC, ABS, PETG, optimized compression set The AD1/CS Series is recommended for applications with excellent adhesion to polar thermoplastics such as ABS, PC and PC/ABS as well as excellent compression set. The compounds are available in natu.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Die B, post cured- 8 hours at 177°C; ASTM D624 |
| Multibase C6-235 DI-CUP R Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Die B, post cured- 8 hours at 177°C; ASTM D624 |
| Multibase C6-250 PERKADOX PD-50S Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
| Tear Strength | 24.5 kN/m | 140 pli | ASTM D624 |
| Multibase Multi-Flex® A 8030 C2 Black TPE Thermoplastic Elastomer Forms: PelletsProcessing Methods:Injection Molding Information provided by Multibase |
|||
| Tear Strength | 24.5 kN/m | 140 pli | ASTM D624 |
| Multibase Multi-Flex® D 4003 Black TPE Thermoplastic Elastomer Forms: PelletsProcessing Methods:Injection MoldingExtrusion Information provided by Multibase |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Die C; ASTM D624 |
| Teknor Apex Telcar® TL-1522H Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | ASTM D624 |
| Teknor Apex UNIPRENE® 7010-64 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
| Tear Strength | 24.5 kN/m | 140 pli | |
| Cytec EN-11 (Conap) Casting, Potting, and Molding Compound High Technology Potting, Casting and Molding CompoundsTwo-component, polybutadiene-based liquid urethane casting and potting systems. When reacted these high technology systems produce tough, stable.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | at 25°C |
| Daikin DAI-EL G-716 Fluoroelastomer Copolymer, Bisphenol Curable Grade, 66% Fluorine Content Offers minimal compression set and excellent sealing. The copolymer type offers good compression set characteristics.Features: Minimal compression set and fast vulcanization.Information provided by.. |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Die C, Vulcanizate, Press cured, TC95 +3min at 160°C |
| Dow Nordel® IP 4570 General Purpose Compound FormulationNordel® IP 4570 |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Warp, Breaking Strength w/o Sizing |
| 3M Nextel™ AF-11 Aerospace Woven Fabric 312 Information provided by 3M |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Fill, Breaking Strength w/o Sizing |
| 3M Nextel™ AF-11 Aerospace Woven Fabric 312 Information provided by 3M |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Die C (graves), 20 in/min; ASTM D624 |
| PolyOne Synprene® IT 36-021 NATURAL Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:Specialty Thermoplastic ElastomerApplications: FDA (Food Contact)Processing Method: Injection MoldingInformation provided by PolyOne Corporation |
|||
| Tear Strength | 24.5 kN/m | 140 pli | die B; ASTM D624 |
| G-2706 Styrene-based Biomedical Elastomer |
|||
| Tear Strength | 24.5 kN/m | 140 pli | die B; ASTM D624 |
| G-2712 Styrene-based Biomedical Elastomer |
|||
| Tear Strength | 24.5 kN/m | 140 pli | Trouser; ASTM D470 |
| Lubrizol ESTANE® 58325 Ether Based Thermoplastic Polyurethane Features: High melt strength for thick sheet extrusion.Uses: Blown and Flat Die/Cast Extrusion, Tubing and Profile ExtrusionAvailable in Americas, Europe, Middle East, Africa, India and AsiaInformat.. |
|||
Copyright © lookpolymers.com All Rights Reserved