Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Owens Corning Glass Fiber Reinforced Polyurethane, Milled Fibers (RRIM), 13 wt.% glass Polyurethane is normally used for its structural properties when molded. It is highly resistant to most organic solvents. It is not recommended for use with strong acids and alkalis, steam, fuels, a.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | |
Pyrotek F-24 Dense Machinable Board F-24 is a high temperature resin material that is reinforced with fiberglass. Abrasion resistant, it is used for hot glass handling applications.ApplicationsDonut rollers for glass Guide rails Wear.. |
|||
Tensile Strength, Ultimate | 19.0 MPa @Temperature 120 °C |
2760 psi @Temperature 248 °F |
ISO 527 |
LATI LATILUB 73/13-01M Polyoxymethylene Base (POM), 1% Molybdenum Disulfide Self Lubricating Plastic
(Unv Description: Latilub self-lubricating plastic materials are more and more often designed to replace metals in applications such as gears, bushings, cams, slides, etc), for which, besides their intri.. |
|||
Tensile Strength, Ultimate | 19.0 - 55.0 MPa | 2760 - 7980 psi | Average value: 47.8 MPa Grade Count:18 |
Overview of materials for ECTFE Fluoropolymer This property data is a summary of similar materials in the MatWeb database for the category "ECTFE Fluoropolymer". Each property range of values reported is minimum and maximum values of appropriat.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
LyondellBasell Astryn 65F4-3 Polypropylene Homopolymer, 30% Talc Key Features: conventional melt flow, very high modulus, mineral-filled polypropylene homopolymer, excellent heat resistance, high stiffness, excellent chemical resistance, good surface qualityAppli.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
LyondellBasell Astryn NXO-21001 Polypropylene Copolymer Key Features: high melt flow, medium modulus polypropylene copolymer, high flow, excellent processability, excellent colorabilityApplications: wire harnesses, housings, thin walled partsDescription:.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 396 Ionomer DescriptionFormion® FI 3936is a 3% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, and impact. Formion F1 396U is UV stabilized to exceed .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 396 Ionomer DescriptionFormion® FI 3936is a 3% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, and impact. Formion F1 396U is UV stabilized to exceed .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 396 Ionomer DescriptionFormion® FI 3936is a 3% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, and impact. Formion F1 396U is UV stabilized to exceed .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | Type IV, crosshead speed 2 in/min; ASTM D638 |
DuPont Elvax® 560 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 396 Ionomer DescriptionFormion® FI 3936is a 3% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, and impact. Formion F1 396U is UV stabilized to exceed .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 396 Ionomer DescriptionFormion® FI 3936is a 3% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, and impact. Formion F1 396U is UV stabilized to exceed .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638/D412 |
Covestro Baydur® 730 IBS Polyurethane Structural Foam RIM, Density 40 pcf, MDI-based 2-Component Liquid System 0.25 in. thickness. IBS = Interactive Blowing System RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638/D412 |
Covestro Baydur® SFR-243 Polyurethane Composite RRIM Foam, MDI-based 2-Component Liquid System 0.25 in. thickness.Information provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – C.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ISO 527-1/-2 |
DSM Arnitel® PB420 TPC-ET Blow Molding Grade |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Devcon Underwater Repair Putty (UW) Epoxy Emergency Repair ProductsComments: High-performance technology for repairing, patching and rebuilding equipment in habitually wet environments, even under water. Eliminates the need for substrate t.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | Die C (35 min / 145°C); ASTM D412 |
Dow SE SLR-4610 Solution polymerized Styrene Butadiene Rubber (S-SBR) SE SLR-4610 is manufactured by anionic solution polymerization using lithium initiator and is extended with 37.5 parts of aromatic oil in relation to solid rubber. It is a product with medium styre.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
A. Schulman ComAlloy Hiloy® 164 Polypropylene, Mineral Reinforced Data provided by the manufacturer, ComAlloy International Company.40% Mineral Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Solvay Specialty Polymers Algoflon® 25CAR PTFE; Petroleum Coke and Graphite
(discontinued **) Data provided by the manufacturer.25 wt.% Petroleum Coke and Graphite. Suspension polymer powder grade recommended for compression molding. Pure PTFE possesses high inertness, excellent dielectric p.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Huntsman PE1201 EVA Film Extrusion
(discontinued **) 2% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Good optical, medium impact strength, and good processability.Applications: Film extrusion: heavy duty packaging.FDA Notes: Conforms to FDA .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Huntsman PE1451 EVA Film Extrusion
(discontinued **) 4.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | Cured 7 min at 177°C and Post Cured 16 hr at 200°C |
DuPont Performance Polymers VTR 8710 (ETP-600S) Peroxide Cured Fluoroelastomer (FKM) Formulation
(discontinue FormulationViton® Extreme™ ETP-600S |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | |
3M Dyneon™ Aflas® FA-100H PTFE Fluoroelastomer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 57%F in polymer with 19% Medium Thermal Carbon Black (N990), 4% Triallyl Isocyanurate (TAIC), 1% Percadox™ 14, 1% Sodium.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
LyondellBasell Astryn 6652 Polypropylene Homopolymer Key Features: low melt flow, medium modulus polypropylene homopolymer, high strength, high impact, good hydrolytic abilityApplications: water pipe fittings and connectorsDescription: Astryn 6652 low.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
LyondellBasell Astryn 7523C Polypropylene Copolymer Key Features: conventional melt flow, medium modulus polypropylene copolymer, excellent impact and stiffness balance, excellent chemical resistance, versatile, good processabilityApplications: autom.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Solvay Specialty Polymers Algoflon® 35CAR B PTFE; Carbon Filled
(discontinued **) Data provided by the manufacturer.35 wt.% Electrog. Carbon Filler. Suspension polymer powder grade recommended for compression molding. Pure PTFE possesses high inertness, excellent dielectric prope.. |
|||
Tensile Strength, Ultimate | 19.0 - 281 MPa | 2760 - 40800 psi | Average value: 106 MPa Grade Count:13 |
Overview of materials for Polyimide, Thermoset Film This property data is a summary of similar materials in the MatWeb database for the category "Polyimide, Thermoset Film". Each property range of values reported is minimum and maximum values of appr.. |