- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength, Yield = 3.72 MPa
Polymer Property : Tensile Strength, Yield = 3.72 MPa Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 3.72 MPa | 540 psi | @ 50% Elongation; ASTM D1414 |
| Greene Tweed CHEMRAZ® 513 Perfluoroelastomer Chemraz® 513 is recommended for a wide variety of semiconductor equipment dry processing applications where seal reliability with minimal contamination is required. This material offers excellen.. |
|||
| Tensile Strength, Yield | 3.72 MPa | 540 psi | @ 50% Elongation; ASTM D1414 |
| Greene Tweed CHEMRAZ® 517 Perfluoroelastomer Greene Tweed’s Chemraz® 517, a perfluoroelastomer, is a white specialty compound, perfect for applications where contamination from carbon black must be prevented. Chemraz 517 has a Shore A.. |
|||
| Tensile Strength, Yield | 3.72 MPa | 540 psi | @50% Elongation; ASTM D1414 |
| Greene Tweed CHEMRAZ® 537 Perfluoroelastomer Chemraz®, a proprietary Greene, Tweed compound, has the broadest chemical resistance of any elastomeric material. Chemraz combines the resilience and sealing force of an elastomer with chemical r.. |
|||
| Tensile Strength, Yield | 3.72 MPa | 540 psi | @50% Elongation; ASTM D1414 |
| Greene Tweed CHEMRAZ® SD517 Perfluoroelastomer Chemraz® SD517, a white-colored perfluoroelastomer, offers the broadest chemical resistance of any elastomer, combining the resilience and sealing force of an elastomer with chemical resitance an.. |
|||
| Tensile Strength, Yield | 3.72 MPa | 540 psi | 100%; ASTM D412 |
| Teknor Apex APEX® 3211-60 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Automotive Applications, Non-specific Food Applications, General Purpose, Medical Applications, Modeling.. |
|||
| Tensile Strength, Yield | 3.72 MPa | 540 psi | ASTM D412 |
| Teknor Apex UNIPRENE® 7010-55 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
| Tensile Strength, Yield | 3.72 MPa | 540 psi | ASTM D412 |
| Teknor Apex Uniprene® UN-7010-55NT Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Gaskets; Glazing; Grommets; Medical Pump Seals; Medical/Healthcare Applications; Plugs; Shock Absorbing Pads; Tubing Agency Ratings: NSF 61 Forms: Pellets Processin.. |
|||
| Tensile Strength, Yield | 3.72 MPa | 540 psi | 100%; ASTM D412 |
| Teknor Apex APEX® 3065-H Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Good FlexibilityUses-General Purpose, ProfilesAppearance-Natural Color, OpaqueForms-PelletsProcessin.. |
|||
| Tensile Strength, Yield | 3.72 MPa @Strain 300 % |
540 psi @Strain 300 % |
Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| PolyOne Synprene® ST-6240 Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:Over-Molding GradeUV StabilizedApplications:Multi-PurposeProcessing Method:Injection MoldingPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
| Tensile Strength, Yield | 3.72 MPa @Strain 300 % |
540 psi @Strain 300 % |
Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| PolyOne Synprene® ST-6250 Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:Over-Molding GradeUV StabilizedApplications:Multi-PurposeProcessing Method:Injection MoldingPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
Copyright © lookpolymers.com All Rights Reserved