Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 54.5 MPa | 7900 psi | ASTM D638 |
Polymer Resources PC/TP-GP1-UV PC/Polyester Alloy, UV-stabilized High Impact, Good Chemical Resistance, UV-stabilizedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information .. |
|||
Tensile Strength at Break | 54.5 MPa | 7900 psi | ASTM D638 |
Ravago Manufacturing Americas Hysun™ A6020 ASA+PC Available in North America Features: Good Impact Resistance and High Heat Resistance RoHS CompliantForm: PelletsInformation provided by Ravago |
|||
Tensile Strength at Break | 54.5 MPa | 7900 psi | TM R050-36 |
Resinlab® EP750 Clear Unfilled Epoxy Structural Adhesive Resinlab™ EP750 Clear is a two part unfilled epoxy structural adhesive which ingredients are listed in the Code of Federal Regulations Title 21 175.105 (Adhesives) and 175.300 (Resinous and polymer.. |
|||
Tensile Strength at Break | 54.5 MPa | 7900 psi | ASTM D638 |
Polymer Resources PC/TP-GP1 PC/Polyester Alloy High Impact, Good Chemical ResistanceProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Pol.. |
|||
Tensile Strength at Break | 54.5 MPa | 7900 psi | ASTM D638 |
Techmer ES HiFill® TPU 85A 0152 S1 Availability: North AmericaForms: PelletsFiller/Reinforcement: MetalInformation provided by TP Composites, Inc. |
|||
Tensile Strength at Break | 54.5 MPa | 7900 psi | ASTM D638 |
Styron PULSEâ„¢ 6000 BG PC/ABS Engineering Resin Overview: PULSE 6000 BG is a PC/ABS resin offering an interesting combination of heat ageing characteristics, low temperature impact performance and high melt strength. Its low MFR enables manufactu.. |
|||
Tensile Strength at Break | 54.5 MPa | 7900 psi | |
Abatron AboCast 8503-3/AboCure 8503-3 Colorless Epoxy AboCast 8503-3/AboCure 8503-3 is a general purpose, medium speed, colorless epoxy casting compound with low viscosity. It has a good balance of properties with a fairly fast hardening. Suggested Use.. |
|||
Tensile Strength at Break | 54.5 MPa | 7900 psi | ASTM D638 |
LNP Lubricomp® IBL-4416 Polyamide 6/12 Copolymer, Glass Bead Reinforced, Silicone Lubricant
(discontinued **) Features: LubricatedForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still ac.. |