Polymer Property : Tensile Strength at Break = 2800 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	19.3 MPa	2800 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Wire & Cable WJJC330 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications. Provisional Product Information - Physical and Mechanical properties based on initial production.Information provide..
Tensile Strength at Break	19.3 MPa	2800 psi	2 in/min; ASTM D638
RheTech Products FT1002-00A Thermoplastic Polyolefin, Non-UV Stabilized, Natural Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	19.3 MPa	2800 psi	2 in/min; ASTM D638
RheTech Products FT4650-01UV Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Scuff platesExterior grillesBodyside moldingsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	19.3 MPa	2800 psi	2 in/min; ASTM D638
RheTech Products FT4650-581UV Thermoplastic Polyolefin, UV Stabilized, HD2 Medium Quartz Metallic Applications: Scuff platesExterior grillesBodyside moldingsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	19.3 MPa	2800 psi	2 in/min; ASTM D638
RheTech Products FT4702-698UV Thermoplastic Polyolefin, UV Stabilized, RXF Jet Black Applications: Bumper trimExterior componentsDoor claddingsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	19.3 MPa	2800 psi	2 in/min; ASTM D638
RheTech Products FT4702-715UV Thermoplastic Polyolefin, UV Stabilized, ZSP Deep Grey Applications: Exterior componentsGrillesBumper trimDoor componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	19.3 MPa	2800 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Elastamax™ HTE 3080 Polyvinyl Chloride + NBR (PVC+NBR) Elastamax™ HTE Series thermoplastic elastomers (TPEs) are based upon compounded blends of PVC resins and nitrile rubber. These elastomeric materials provide outstanding resistance to hydrocarbons a..
Tensile Strength at Break	19.3 MPa	2800 psi	510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible A5DM0 Polyvinyl Chloride, Flexible (PVC, Flexible) Recommended for interior applications.Information provided by PolyOne
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D4894
3M Dyneon™ CC503 PTFE, 15% Mineral Filled (discontinued **) Product Form: White, pelletized free-flowing powder. Applications include bearings - FDA compliant, valve seats, seals.Data provided by Dyneon.
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D4894
3M Dyneon™ CC622 PTFE 10% Graphite Filled (discontinued **) Product Form: Black, pelletized free-flowing powder. Applications include bearings, ring seals.Data provided by Dyneon.
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D4745
3M Dyneon™ CC503 Custom Fluoropolymer Compound (discontinued **) This compound consists of a mixture of 15% mineral blended with PTFE.Information provided by Dyneon, A 3M Company
Tensile Strength at Break	19.3 MPa	2800 psi	510 mm/min; ASTM D412A
PolyOne Elastamax™ XL 0131-61 Styrene Butadiene Block Copolymer (SBC) (discontinued **) A thermoplastic elastomer compound formulated for use in food contact applications. The physical properties listed above are typical values obtained on laboratory prepared samples and tested in acco..
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D412
ITW Devcon FlexaneÂ® Rubber Repair / Castable Urethane 94 Liquid, Black Information provided by ITW Devcon
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D1414
Greene Tweed FLUORAZÂ® 797 Fluoroelastomer, FEPM Greene, Tweed`s FluorazÂ® functions effortlessly in a variety of challenging process environments. Fluoraz performs well in aggressive chemicals where ultrapure materials are not required. Known f..
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D638
Teknor Apex APEXÂ® 65004 Polyvinyl Chloride, Flexible Notes: 75Â°C Jacket; RoHS Compliant Features: Flame Retardant; Sunlight Resistant (720 hours) Uses: Communication Wire JacketingForms: Pellets Agency Ratings: NEC Article 725; NEC Article 760; NEC..
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D412
Teknor Apex MonpreneÂ® MP-2150 Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo..
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D638
Teknor Apex APEXÂ® 65006 Polyvinyl Chloride, Flexible Notes: 75Â°C Jacket; RoHS Compliant Uses: Wire and Cable ApplicationsForms: PelletsInformation Provided by Teknor Apex
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D412
Teknor Apex Telcar® TL-8431 Thermoplastic Elastomer Notes: RoHS Compliant Uses: Appliance Wire Insulation; Appliance Wire Jacketing; Cable Jacketing; Connectors; Flexible Cord Jacketing; Electrical/Electronic Applications; Industrial Cable Jacketing;..
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D638
A. Schulman POLYTROPE™ TPP 1010HF-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 1010HF-01 is an injection molding reactor grade olefinic thermoplastic elastomer (TPO). This product has excellent low temperature impact properties and flow characteristic..
Tensile Strength at Break	19.3 MPa	2800 psi	vs. aluminum; 15 s set time
Elmer's Products Aron Alpha® 201 Cyanoacrylate Adhesive (Industrial Krazy Glue™) General purpose adhesive for a variety of applications. Various viscosities and gap filling properties available.Low gap fill. Ethyl base monomer. Excellent on rubber/plastic substrates. Fair on..
Tensile Strength at Break	19.3 MPa	2800 psi	vs. aluminum; 5 s set time
Elmer's Products Aron Alpha® 202F Cyanoacrylate Adhesive (Industrial Krazy Glue™) Surface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates. Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on..
Tensile Strength at Break	19.3 MPa	2800 psi	vs. aluminum; 60 s set time
Elmer's Products Aron Alpha® 212E Cyanoacrylate Adhesive (Industrial Krazy Glue™) For clean, fast applications. Best for high speed automated assembly.Medium gap fill. Ethyl base monomer. Excellent on rubber/plastic substrates. Fair on metal substrates. Excellent on porous s..
Tensile Strength at Break	19.3 MPa	2800 psi	vs. aluminum; 5 s set time
Elmer's Products Aron Alpha® 231F Cyanoacrylate Adhesive (Industrial Krazy Glue™) Surface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates. Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on..
Tensile Strength at Break	19.3 MPa	2800 psi	vs. aluminum; 15 s set time
Elmer's Products Aron Alpha® 241F Cyanoacrylate Adhesive (Industrial Krazy Glue™) Surface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates. Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on..
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D638
ExxonMobil LLDPE LL 1001XV Wire & Cable Linear Low Density Polyethylene Resin (European Grade) Product Description: LL 1001 XV is a C4 Ziegler Natta LLDPE for power cable and Telecom jacketing. The grade contains a low level of antioxidants and has excellent Environmental Stress Crack Resista..
Tensile Strength at Break	19.3 MPa	2800 psi	vs. aluminum; 60 s set time
Elmer's Products Aron Alpha® 252E Cyanoacrylate Adhesive (Industrial Krazy Glue™) For clean, fast applications. Best for high speed automated assembly.High gap fill. Ethyl base monomer. Excellent on rubber/plastic substrates. Fair on metal substrates. Excellent on porous sub..
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D638
Americas Styrenics EA6740 High Impact Polystyrene Product CharacteristicsVery good printabilityMatte surface finishHigh heat distortion temperatureGood low temperature toughnessFood Contact CompliantTypical ApplicationsPackaging and one-time use it..
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D638
Americas Styrenics STYRON A-TECH® 1115 High Impact Polystyrene Product CharacteristicsHigh Gloss/High ImpactConsistent colorabilityEasy processingFood Contact CompliantTypical ApplicationsCustom high Gloss Extruded SheetRefrigeration accessoriesSmall Appliances..
Tensile Strength at Break	19.3 MPa	2800 psi	ASTM D638 ISO 527-2
DuPont Elvax® 4355 Ethylene Vinyl Acetate (discontinued **) DuPont™ Elvax® 4355 is an ethylene-vinyl acetate / acid terpolymer resin for use in industrial applications.ApplicationsElvax® 4355 resins can be used for the following applications: adhesives, s..