Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Izod Impact, Notched = 0.600 ft-lb/in Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
73°F; ASTM D256
Multibase Multi-Pro® 4615 X White Polypropylene
Forms:PelletsProcessing Methods:Injection MoldingInformation provided by Multibase
Izod Impact, Notched 0.320 J/cm

@Temperature 23.0 °C
0.600 ft-lb/in

@Temperature 73.4 °F
ASTM D256
RheTech Products RCT120-01 20% Talc Reinforced Polypropylene, Black, Recycled Content
Applications: HVAC and I/P ComponentsUnderhood componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Izod Impact, Notched 0.320 J/cm

@Temperature 23.0 °C
0.600 ft-lb/in

@Temperature 73.4 °F
ASTM D256
RheTech Products T20P250-699UV 20% Talc Reinforced Polypropylene Copolymer, UV Stabilized, AC20157-120 Black
Applications: Window trimCowl screensExterior componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Izod Impact, Notched >= 0.320 J/cm
>= 0.600 ft-lb/in
ASTM D256
S&E Specialty Polymers GPP1001HFNH-2-AT(18) PP
Application: Non-halogen flame retardant UL-94 V0 polypropylene compound.Information provided by S&E Specialty Polymers
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
ASTM D256 Type A
Quadrant EPP Ketron® 1000 PEEK, Extruded Unfilled Polyetherether Ketone (ASTM Product Data Sheet)
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
ASTM D256
Quantum Nylon 6/6
Information provided by Quantum Advanced Engineering Plastics
Izod Impact, Notched 0.320 J/cm

@Diameter 0.125 mm,
Temperature -20.0 °C
0.600 ft-lb/in

@Diameter 0.00492 in,
Temperature -4.00 °F
bar; ASTM D256
Ineos L12Z-00 Polypropylene Impact Copolymer
Grade L12Z-00 is a medium melt flow rate, high stiffness and high impact polypropylene copolymer. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR..
Izod Impact, Notched 0.320 J/cm

@Thickness 3.17 mm
0.600 ft-lb/in

@Thickness 0.125 in
ASTM D256
Techmer ES Plastiblend® PA6 SF80 L
Availability: North AmericaForms: Pellets Additive: Lubricant and Strontium Ferrite (80%)Features: LubricatedInformation provided by TP Composites, Inc.
Izod Impact, Notched 0.320 J/cm

@Thickness 3.17 mm
0.600 ft-lb/in

@Thickness 0.125 in
ASTM D256
Techmer ES HiFill® HDPE TM25 25% Talc Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Talc Filler, 25% Filler by WeightInformation provided by TP Composites, Inc.
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
ASTM D256
A. Schulman ComAlloy® E-12421 Reinforced High Flow Polyamide
Information provided by A. Schulman.The ComAlloy product line has been integrated into the A Schulman product line.
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
ASTM D256
A. Schulman POLYFORT™ FPP 1842 Homopolymer Polypropylene
DescriptionPolyfort® FPP 1842 is a high stiffness, high heat resistant filled homopolymer polypropylene developed especially for instrument panel clusters. It is opaque to high intensity light.Inf..
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
Tra-Con Tra-Bond 2230 Color Keyed, High Temperature Epoxy Adhesive
TRA-BOND 2230 is a clear, low viscosity, high temperature, two-part epoxy adhesive that changes colors during the curing process to indicate cure status. The unmixed components are light yellow; the..
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
Tra-Con Tra-Bond F230 Color Keyed High Temperature Epoxy Adhesive
TRA-BOND F230 is a clear, low viscosity, high temperature, two-part epoxy adhesive that changes colors during the curing process to indicate cure status. The unmixed components are light yellow; the..
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
ASTM D256
Ensinger Tecast™ 6PA Natural Unfilled Cast Nylon 6 (PA6)
Tecast® 6PA Natural is an FDA-compliant grade used in applications requiring cast nylon but without any fillers.General Tecast® Cast Nylon Information: Tecast cast nylon, available in a variety of..
Izod Impact, Notched 0.320 J/cm

@Temperature 0.000 °C
0.600 ft-lb/in

@Temperature 32.0 °F
molded and tested in accordance with ASTM D 4101; ASTM D256A
Dow H110-02N Polypropylene Resin
DOW H110-02N is intended for use in extrusion and thermoforming processes. It is especially suited for applications where improved melt strength and clarity are desired.Information provided by DowD..
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
ASTM D256
Aclo Accutech Polypropylene Homopolymer HP0339W20L1 Wollastonite Reinforced
Izod Impact, Notched 0.320 - 0.481 J/cm
0.600 - 0.900 ft-lb/in
ASTM D256
Cast Nylons Nycast® GF 30% Glass Filled Cast Nylon
Offering improved tensile, compressive and flexural properties over conventional unfilled cast nylon, NYCAST® GF (Glass Filled)-30% provides increased load bearing characteristics and is the choice..
Izod Impact, Notched 0.320 J/cm
0.600 ft-lb/in
ASTM D256
Aaron Industries AAROLENE® ARPP H 200-1 PP Black Polypropylene Homopolymer Compounded Resin
AAROLENE® ARPP 200 Series Polypropylene Compounded ResinFeatures: A pre-colored, black homopolymer polypropylene resin specifically designed for all injection molding applications.High Flow
Izod Impact, Notched 0.320 J/cm

@Thickness 6.35 mm
0.600 ft-lb/in

@Thickness 0.250 in
ASTM D256
PlastxWorld DAICEL STYROL® SK50H HIPS
Flame retarded HIPSThese are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc.
Izod Impact, Notched 0.320 J/cm

@Thickness 3.17 mm
0.600 ft-lb/in

@Thickness 0.125 in
ASTM D256
Techmer ES HiFill® HIPS 0212
Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforInformation provided by TP Composites, Inc.
Izod Impact, Notched 0.320 - 2.51 J/cm
0.600 - 4.70 ft-lb/in
Average value: 0.928 J/cm Grade Count:5
Overview of materials for Polyphenylene Sulfide (PPS), Unreinforced, Extruded
This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS), Unreinforced, Extruded". Each property range of values reported is minimum ..
Izod Impact, Notched 0.320 - 1.23 J/cm
0.600 - 2.30 ft-lb/in
Average value: 0.776 J/cm Grade Count:11
Overview of materials for Acrylic, Gamma Radiation Resistant, Molded
This property data is a summary of similar materials in the MatWeb database for the category "Acrylic, Gamma Radiation Resistant, Molded". Each property range of values reported is minimum and maxim..
Copyright © lookpolymers.com All Rights Reserved