Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Izod Impact, Notched | 0.270 J/cm @Thickness 3.18 mm, Temperature 23.0 °C |
0.506 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Injection Molded; ASTM D256A |
PolyOne Maxxam™ DP-9162-3 Polypropylene, Unspecified (PP, Unspecified) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car.. |
|||
Izod Impact, Notched | 0.270 J/cm @Thickness 3.18 mm, Temperature 23.0 °C |
0.506 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Injection Molded; ASTM D256A |
PolyOne Maxxam™ PPC-40T Nat Polypropylene Copolymer (PP Copolymer) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car.. |
|||
Izod Impact, Notched | 0.270 J/cm @Thickness 6.35 mm, Temperature 23.0 °C |
0.506 ft-lb/in @Thickness 0.250 in, Temperature 73.4 °F |
Injection Molded; ASTM D256A |
PolyOne Therma-Tech™ LC-6000 TC Liquid Crystal Polymer (LCP) Therma-Tech™ Thermal Management Compounds have been engineered to combine the heat transfer and cooling capabilities of metals with the design freedom, weight reduction and cost advantages of therm.. |
|||
Izod Impact, Notched | 0.270 - 0.520 J/cm @Temperature -40.0 - -40.0 °C |
0.506 - 0.974 ft-lb/in @Temperature -40.0 - -40.0 °F |
Average value: 0.360 J/cm Grade Count:3 |
Overview of materials for PETG Copolyester This property data is a summary of similar materials in the MatWeb database for the category "PETG Copolyester". Each property range of values reported is minimum and maximum values of appropriate M.. |
|||
Izod Impact, Notched | 0.270 - 3.50 J/cm | 0.506 - 6.56 ft-lb/in | Average value: 0.801 J/cm Grade Count:26 |
Overview of materials for Diallyl Phthalate (DAP) Molding Compound, Short Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Diallyl Phthalate (DAP) Molding Compound, Short Glass Fiber Filled". Each property range of values repor.. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
Ineos Nova Zylar® 220 High Performance Styrenic, Acrylic Copolymer
(discontinued **) Excellent moldability, High clarity, Extended toughness and elongation, meets USP XXI specification for Class VI Plastics, Property retention after gamma irradiationApplications: Display, medical de.. |
|||
Izod Impact, Notched | 0.270 J/cm @Thickness 3.18 mm, Temperature 23.0 °C |
0.506 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
Injection Molded; ASTM D256A |
PolyOne Edgetek® ET5200-0018 UV RS Desert Sage Polypropylene Homopolymer (PP Homopolymer) The Edgetek® Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for .. |
|||
Izod Impact, Notched | 0.270 J/cm @Temperature 23.0 °C |
0.506 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
Reliance Industries Repol H110MA Polypropylene REPOL Polypropylene H110MA is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Izod Impact, Notched | 0.270 J/cm @Temperature 23.0 °C |
0.506 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
Reliance Industries Repol H200FG Polypropylene REPOL Polypropylene H200FG is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Izod Impact, Notched | 0.270 J/cm @Temperature 23.0 °C |
0.506 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
Reliance Industries Repol H200MA Polypropylene REPOL Polypropylene H200MA is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Izod Impact, Notched | 0.270 - 0.630 J/cm | 0.506 - 1.18 ft-lb/in | Average value: 0.447 J/cm Grade Count:9 |
Overview of materials for Phenolic, Novolac, Cellulose Filled This property data is a summary of similar materials in the MatWeb database for the category "Phenolic, Novolac, Cellulose Filled". Each property range of values reported is minimum and maximum valu.. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
Plenco 307 Black Impact Grade Mineral/Flock Filled Phenolic Molding Compound
(discontinued **) Plaslok 307 is a two-stage, mineral and flock-filled phenolic molding compound designed for the automotive industry for use in brake system components. It is characterized by good molding latitude .. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
Solvay Specialty Polymers Amodel® A-4122 HR WH 117 Polyphthalamide (PPA), 22% Glass Fiber Amodel® A-4122 HR resin is a 22% glass reinforced polyphthalamide (PPA), designed to provide high crystallinity when molded in water-cooled molds. This material exhibits high heat resistance, hig.. |
|||
Izod Impact, Notched | 0.270 J/cm @Temperature -30.0 °C |
0.506 ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
SABIC Innovative Plastics Valox® IQ3001 PBT (Europe-Africa-Middle East) Valox IQ3001 is an unfilled environmentally responsible iQ-PBT resin modified with elastomer. Targeted for flexible hinge applications. |
|||
Izod Impact, Notched | 0.270 J/cm @Thickness 3.17 mm |
0.506 ft-lb/in @Thickness 0.125 in |
ASTM Test |
Styrolution Styrolux 3G33 SBC Styrolux 3G33 is a thermoplastic styrene-butadiene block copolymer which is suitable for injection molding, extrusion and thermoforming. It offers an outstanding combination of crystal clarity and .. |
|||
Izod Impact, Notched | 0.270 J/cm @Temperature -30.0 °C |
0.506 ft-lb/in @Temperature -22.0 °F |
ASTM D256 |
SABIC Innovative Plastics NORYL FP6130 PPE+PS (Asia Pacific) Noryl* FP6130 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and high flow , this resin also uses non-chlorinated, non-brominated FR a.. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
A. Schulman POLYFORT™ FPP 809 Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 809 is a 40% talc-filled homopolymer polypropylene.Information provided by A. Schulman. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
A. Schulman PP 1449-01 Polypropylene General-Purpose Homopolymer Polypropylene DescriptionPolypropylene PP 1449-01 Natural is a homopolymer polypropylene designed for general-purpose injection-molding applications where parts require excellent stiffness.ApplicationPP 1449-01 m.. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
A. Schulman POLYFORT™ FPP 809 Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 809 is a 40% talc-filled homopolymer polypropylene.Information provided by A. Schulman. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
A. Schulman PP 1449-01 Polypropylene General-Purpose Homopolymer Polypropylene DescriptionPolypropylene PP 1449-01 Natural is a homopolymer polypropylene designed for general-purpose injection-molding applications where parts require excellent stiffness.ApplicationPP 1449-01 m.. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
A. Schulman POLYFORT™ FPP 1007X Extra High Flow, Talc Fortified Homopolymer Polypropylene DescriptionPolyfort® FPP 1007X is an extra high flow, 40% talc fortified homopolymer polypropylene. Information provided by A. Schulman. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
A. Schulman POLYFLAM™ RPP 1174 Talc Filled, Homopolymer Polypropylene DescriptionPolyflam® RPP 1174 is a high performance talc filled homopolymer polypropylene product with UL V0 flammability and 105°C temperature index at 0.81 mm. RPP 1174 is non-dripping and has .. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256, Notch |
Cresset Powers Cress-Alon™ NF3020 2% Nano Clay Loaded, 3.0 r.v. Film Grade Nylon 6, Dry As Molded Low density, high rigidity, high heat distortion temperature, high retention of mechanical properties under humid conditions, flame retardant, recyclable and environmentally friendly, less glass fib.. |
|||
Izod Impact, Notched | 0.270 J/cm @Thickness 3.17 mm |
0.506 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
Entec Hypro™ PP-HP35NS Homopolymer, 35 Melt Flow This product is intended for thin-wall injection molding applications as well as low denier filament yarns, extrusion coating and specialty cast embossed film.Information provided by Entec |
|||
Izod Impact, Notched | 0.270 J/cm @Thickness 3.17 mm |
0.506 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
Entec Hypro™ PP-HP20 Homopolymer, 20 Melt Flow This product can be used for general purpose injection molding as well as fiber spinning and other critical extrusion applicationsInformation provided by Entec |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | 5% Cloisite® reinforced Nylon 6 |
BYK Cloisite® 15A Nanoclay Cloisite® 15A is an additive for plastics to improve various plastic physical properties, such as reinforcement, HDT, CLTE and barrier.Information provided by Southern Clay ProductsSouthern Clay Pr.. |
|||
Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | 5% Cloisite® reinforced Nylon 6 |
BYK Cloisite® 20A Nanoclay Cloisite® 20A is an additive for plastics to improve various plastic physical properties, such as reinforcement, HDT, CLTE and barrier.Information provided by Southern Clay ProductsSouthern Clay Pr.. |
|||
Izod Impact, Notched | 0.270 - 1.07 J/cm | 0.506 - 2.00 ft-lb/in | Average value: 0.534 J/cm Grade Count:27 |
Overview of materials for Acetal Homopolymer, PTFE-Filled This property data is a summary of similar materials in the MatWeb database for the category "Acetal Homopolymer, PTFE-Filled". Each property range of values reported is minimum and maximum values o.. |
|||
Izod Impact, Notched | 0.270 - 0.800 J/cm @Temperature -40.0 - -40.0 °C |
0.506 - 1.50 ft-lb/in @Temperature -40.0 - -40.0 °F |
Average value: 0.447 J/cm Grade Count:11 |
Overview of materials for Ethyl Cellulose, Molded This property data is a summary of similar materials in the MatWeb database for the category "Ethyl Cellulose, Molded". Each property range of values reported is minimum and maximum values of approp.. |