Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Strength = 1450 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Strength >= 10.0 MPa
>= 1450 psi
DIN 53504
NEXA® PFX8028 Perfluoroelastomer
NEXA produces sealing elements for extreme and critical applications, particularly where high temperature, wet conditions (steam/water), purity and chemical resistance are important factors to consi..
Tensile Strength 10.0 MPa
1450 psi
at Yield; ISO 527-1/-2
Quadrant EPP Fluorosint® 207 PTFE + mica, compression moulded (ISO Data)
This material has a food contact compliant composition which, in combination with the good mechanical performance, dimensional stability, sliding and wear properties and inherent outstanding chemica..
Tensile Strength >= 10.0 MPa
>= 1450 psi
After 168 H in Air Oven at 100°C; NBR NM-IEC 60811-1-2
Karina Karintox 70/6 Polyolefin Compound
Karintox is a thermoplastic polyolefin, flame retardant, non-halogen, and low smoke emission. Recommended for electrical coating for cables until 1KV. For a better usage/processing, manufacturer sug..
Tensile Strength 10.0 MPa
1450 psi
DIN 53504/ISO 37
Kraiburg TPE THERMOLAST® K TC9CSN Thermoplastic Elastomer, Optimized compression set
The CS Series is recommended for sealing applications, providing an excellent compression set. The compounds are available in natural and black colors. Typical applications: FasteningsGrommetsMembra..
Tensile Strength 10.0 MPa
1450 psi
DIN 53504/ISO 37
Kraiburg TPE THERMOLAST® K TC9CSZ Thermoplastic Elastomer, Optimized compression set
The CS Series is recommended for sealing applications, providing an excellent compression set. The compounds are available in natural and black colors. Typical applications: FasteningsGrommetsMembra..
Tensile Strength 10.0 MPa
1450 psi
DIN 53504/ISO 37
Kraiburg TPE THERMOLAST® K TF5WKF Thermoplastic Elastomer, Drinking Water
The DW Series is recommended for applications in contact with drinking water. The compounds are approved in accordance with all relevant European drinking water standards – DVGW, W270, KTW, WRA..
Tensile Strength 10.0 MPa
1450 psi
DIN 53504/ISO 37
Kraiburg TPE THERMOLAST® K TF6THT Thermoplastic Elastomer, high transparency
The FC/ht Series is a highly transparent material solution for applications with food contact. The series is characterized, among other things, by its excellent adhesion to PP. Typical applications:..
Tensile Strength 10.0 MPa
1450 psi
DIN 53504/ISO 37
Kraiburg TPE THERMOLAST® K TP6HPN Thermoplastic Elastomer, Outdoor Grade
Typical applications of the EX/UV Series: Edge guardsDistance ProfilesMolded Parts (Solar Equipment)SealsInformation Provided by Kraiburg TPE Corp.
Tensile Strength 10.0 MPa
1450 psi
DIN 53504/ISO 37
Kraiburg TPE THERMOLAST® V TV8LVN Thermoplastic Elastomer, General purpose, long term performance
The LTP Series is recommended for sealings requiring high temperature resistance. The compounds are characterized by an excellent adhesion to PP. Typical applications: FasteningsGrommetsSealsMateria..
Tensile Strength 10.0 MPa
1450 psi
JPJ Technologies LD 150 LDPE Virgin
Applications: Used for heavy duty packaging, packaging bags, general film bag, etc.Information provided by JPJ Technologies
Tensile Strength 10.0 MPa
1450 psi
Momentive Performance Materials Siloprenâ„¢ Electro 641 Electrically Insulating Liquid Silicone Rubber
This LSR elastomer is an electrically insulating, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevate..
Tensile Strength 10.0 MPa
1450 psi
Momentive Performance Materials Siloprenâ„¢ LSR 2650 ZKS Custom Liquid Silicone Rubber - Automotive
This LSR elastomer is a specialty grade, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated tempera..
Tensile Strength 10.0 MPa
1450 psi
Momentive Performance Materials Siloprenâ„¢ LSR 2715/50 Liquid Silicone Rubber - Self-Bonding / Self-Lubricating
This LSR elastomer is a self-bonding, self-lubricating, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at e..
Tensile Strength 10.0 MPa
1450 psi
Momentive Performance Materials Siloprenâ„¢ LSR 2740 Liquid Silicone Rubber - Self-Bonding
This LSR elastomer is a self-bonding, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated temperatur..
Tensile Strength 10.0 MPa
1450 psi
Momentive Performance Materials Siloprenâ„¢ LSR 2750 Liquid Silicone Rubber - Self-Bonding
This LSR elastomer is a self-bonding, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated temperatur..
Tensile Strength >= 10.0 MPa
>= 1450 psi
ASTM D 638
Karina 806-40/236-H-ISE-LMP White PVC Compound
Heavy metal free PVC compound.Information provided by Karina Indústria e Comércio de Plásticos Ltda.
Tensile Strength >= 10.0 MPa
>= 1450 psi
After 168 H in Air Oven at 100°C; NBR NM-IEC 60811-1-2
Karina 806-40/236-H-ISE-LMP White PVC Compound
Heavy metal free PVC compound.Information provided by Karina Indústria e Comércio de Plásticos Ltda.
Tensile Strength >= 10.0 MPa
>= 1450 psi
After 168 H in Air Oven at 100°C; NBR NM-IEC 60811-1-2
Karina 807-10/236-H-Ise White PVC Compound
Information provided by Karina Indústria e Comércio de Plásticos Ltda.
Tensile Strength 10.0 MPa
1450 psi
Momentive Performance Materials Silplusâ„¢ 80 EX Heat Cured Rubber - Extrusion
Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta..
Tensile Strength 10.0 MPa
1450 psi
Shin-Etsu Silicones LIMSâ„¢ KEG2002-60A/B Elastomer
Information Provided by Shin-Etsu Silicones of America, Inc.
Tensile Strength 10.0 MPa
1450 psi
Master Bond EP30DPMed USP Class VI, Two Component Epoxy Urethane System
Master Bond Polymer System EP30DPMED is a versatile, two component, epoxy-urethane elastomeric compound, featuring superior strength, toughness, and abrasion resistance for high performance bonding,..
Tensile Strength >= 10.0 MPa
>= 1450 psi
ASTM F152
Thermoseal RG-P160 PTG Gasketing
Thermoseal RG-P160 is a blended fiber and polychloroprene rubber gasket material with mineral fillers. A factory applied release coating on both sides aid in flange removal. Continuous roll lengths ..
Tensile Strength 10.0 MPa
1450 psi
ASTM D638
Goodfellow TPX® MX002O Polymethylpentene
This grade is highly recommended for injection molding, film and mandrel extrusion; also for fiber extrusion and blow molding.TPX® is semi-crystalline, transparent, very light and - for a polyolefi..
Tensile Strength 10.0 MPa
1450 psi
ASTM D638
Goodfellow TPX® DX310 Coating/Extrusion Grade Polymethylpentene
This grade is highly recommended for paper coating or for fiber extrusion.TPX® is semi-crystalline, transparent, very light and - for a polyolefin - expensive. It has good release characteristics a..
Tensile Strength 10.0 MPa
1450 psi
ASTM D412
Elastocon TPE Technologies Elastocon® CLR75 Thermoplastic Elastomer
Elastocon® CLR75 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a tactile surface fin..
Tensile Strength 10.0 MPa
1450 psi
Silicone Property; ASTM D412
Arlon 99020N015 0.015" Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier
Design/Construction:Interleave: 0.001" FEP FilmSide 1: Uncured Silicone RubberCarrier: 0.003" PTFE coated FiberglassRecommended Primer: Chemlock 607This data represents typical values for the pro..
Tensile Strength 10.0 MPa
1450 psi
Silicone Property; ASTM D412
Arlon R35640T003 0.003" (0.0762 mm) Uncured Silicone Rubber with Polyethylene Naphthalate Substrate
Design/Construction:Liner: Polyester Side 1: Uncured Silicone RubberSubstrate: Polyethylene NaphthalateAppearance: Gray gum on glass fiber fabricThis data represents typical values for the productio..
Tensile Strength >= 10.0 MPa
>= 1450 psi
ISO 37
Austin Novel Materials Texalan® 565A Polyether-based TPU
Description: Good low temperature resistance, hydro resistance, which can be used in cold and humid temperaturesInformation from Dawnentech
Tensile Strength 10.0 MPa
1450 psi
100; ISO 37
BASF Elastollan 890 AN TPUR
Description: Thermoplastic Polyurethane Elastomers with excellent mechanical properties, outstanding wear resistance, high tear and tensile strength, good damping characteristics and a high resilien..
Tensile Strength 10.0 MPa
1450 psi
Momentive Performance Materials HV 3/706 Heat Cured Rubber - High Temperature
Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta..
Copyright © lookpolymers.com All Rights Reserved