Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 30 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 25 - 30 g/10 min

@Load 5.00 kg,
Temperature 190 °C
25 - 30 g/10 min

@Load 11.0 lb,
Temperature 374 °F
ISO 1133
Polyplastic Armoflen® PO MF 65-4 Polypropylene, 65% Calcium Carbonate
Information provided by PolyPlastic Group.
Melt Flow 20 - 30 g/10 min

@Load 2.16 kg,
Temperature 230 °C
20 - 30 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238/L
NIZHNEKAMSKNEFTEKHIM PP 1362R (Z21S) Propylene Homopolymer
Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P..
Melt Flow 20 - 30 g/10 min

@Load 2.16 kg,
Temperature 230 °C
20 - 30 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238/L
NIZHNEKAMSKNEFTEKHIM PP 1450R (Z30S) Propylene Homopolymer
Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P..
Melt Flow 12 - 30 g/10 min

@Load 5.00 kg,
Temperature 250 °C
12 - 30 g/10 min

@Load 11.0 lb,
Temperature 482 °F
ASTM D1238
Polymer Resources PC/ABS-GP2 General Purpose PC/ABS Alloy, High Flow
PC/ABS Alloy, General Purpose, High FlowProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by ..
Melt Flow 20 - 30 g/10 min

@Load 1.20 kg,
Temperature 300 °C
20 - 30 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Polymer Resources PC-FD4-[color]-1 Polycarbonate, FDA-compliant Feedstocks, Easy Flow with Mold Release, Gamma Resistant
Polycarbonate, FDA-compliant Feedstocks, Easy Flow with Mold Release, Gamma ResistantProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pig..
Melt Flow 18 - 30 g/10 min

@Load 1.20 kg,
Temperature 300 °C
18 - 30 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Polymer Resources PC-GP4 Polycarbonate, General Purpose, Easy Flow
Polycarbonate, General Purpose, Easy FlowFeatures: • High Impact Resistance • Self Extinguishing • High FlowProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conduc..
Melt Flow 18 - 30 g/10 min

@Load 1.20 kg,
Temperature 300 °C
18 - 30 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Polymer Resources PC-GP4-[color]-1 Polycarbonate, General Purpose, Easy Flow with Mold Release
Polycarbonate, General Purpose, Easy Flow with Mold ReleaseProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Infor..
Melt Flow 20 - 30 g/10 min

@Load 11.6 kg,
Temperature 250 °C
20 - 30 g/10 min

@Load 25.6 lb,
Temperature 482 °F
ASTM D1238
Polymer Resources PPX-GP4-IM Modified-PPO, Impact Modified
Modified-Polyphenylene Oxide, Impact Modified, 210F HDTProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Informati..
Melt Flow 18 - 30 g/10 min

@Load 1.20 kg,
Temperature 300 °C
18 - 30 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Polymer Resources PC-FD4 Polycarbonate, FDA-compliant Feedstocks, Easy Flow, Gamma Resistant
Polycarbonate, FDA-compliant Feedstocks, Easy Flow, Gamma ResistantProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test sampl..
Melt Flow 18 - 30 g/10 min

@Load 1.20 kg,
Temperature 300 °C
18 - 30 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Polymer Resources PC-UV4 Polycarbonate, UV-stabilized, Easy Flow
Polycarbonate, UV-stabilized, Easy FlowProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by P..
Melt Flow 18 - 30 g/10 min

@Load 1.20 kg,
Temperature 300 °C
18 - 30 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Polymer Resources PC-UV4-[color]-1 Polycarbonate, UV-stabilized, Easy Flow with Mold Release
Polycarbonate, UV-stabilized, Easy Flow with Mold ReleaseProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Informa..
Melt Flow 5.0 - 30 g/10 min
5.0 - 30 g/10 min
ASTM D1238
Polymer Resources PEI-GP1 Polyetherimide, General Purpose, Unreinforced  (Unverified Data**)
Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Melt Flow 10 - 30 g/10 min

@Load 2.16 kg,
Temperature 170 °C
10 - 30 g/10 min

@Load 4.76 lb,
Temperature 338 °F
ISO 1133
Lubrizol Advanced Materials Pearlbond® 180 Thermoplastic Polyurethane
Pearlbondâ„¢ 180 is a linear, polyester-based polyurethane, supplied in form of small white granules, which combines a very high crystallization rate with a very high thermoplasticity level. It i..
Melt Flow 10 - 30 g/10 min

@Load 2.16 kg,
Temperature 170 °C
10 - 30 g/10 min

@Load 4.76 lb,
Temperature 338 °F
ISO 1133
Lubrizol Advanced Materials Pearlbond® 550 Thermoplastic Polyurethane
Pearlbondâ„¢ 550 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a very high crystallization rate and a very high thermoplasticity level...
Melt Flow 10 - 30 g/10 min

@Load 2.16 kg,
Temperature 170 °C
10 - 30 g/10 min

@Load 4.76 lb,
Temperature 338 °F
ISO 1133
Lubrizol Advanced Materials Pearlbond® 580 Thermoplastic Polyurethane
Pearlbondâ„¢ 580 is a linear, Polyester-based TPU, supplied in form of white spherical granules with a very high crystallization rate and a very high thermoplasticity level.Application: Pearlbond..
Melt Flow 20 - 30 g/10 min

@Temperature 230 °C
20 - 30 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ FPP 1007X Extra High Flow, Talc Fortified Homopolymer Polypropylene
DescriptionPolyfort® FPP 1007X is an extra high flow, 40% talc fortified homopolymer polypropylene. Information provided by A. Schulman.
Melt Flow 20 - 30 g/10 min

@Temperature 230 °C
20 - 30 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ PP 2175HU Toyota High Flow Copolymer Polypropylene
DescriptionPolyfort® PP 2175HU Toyota is a high flow copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 20 - 30 g/10 min

@Temperature 230 °C
20 - 30 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ PP 2175HU-31 High Flow Copolymer Polypropylene
DescriptionPolyfort® PP 2175HU-31 is a high flow copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 20 - 30 g/10 min

@Temperature 230 °C
20 - 30 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ PP 2175HU Toyota High Flow Copolymer Polypropylene
DescriptionPolyfort® PP 2175HU Toyota is a high flow copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 15 - 30 g/10 min

@Load 2.16 kg,
Temperature 280 °C
15 - 30 g/10 min

@Load 4.76 lb,
Temperature 536 °F
Zeon Chemicals Zeonor® 1020R Cyclo-Olefin Polymer
Zeonor 1060R shall be in the form of pellets.
Melt Flow 20 - 30 g/10 min

@Temperature 230 °C
20 - 30 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ PP 2175HU-31 High Flow Copolymer Polypropylene
DescriptionPolyfort® PP 2175HU-31 is a high flow copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 25 - 30 g/10 min
25 - 30 g/10 min
Toyobo GLAMIDE® NB-1700 Nylon/Olefin
GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a..
Melt Flow 20 - 30 g/10 min

@Temperature 230 °C
20 - 30 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ FPP 1007X Extra High Flow, Talc Fortified Homopolymer Polypropylene
DescriptionPolyfort® FPP 1007X is an extra high flow, 40% talc fortified homopolymer polypropylene. Information provided by A. Schulman.
Melt Flow 20 - 30 g/10 min

@Temperature 230 °C
20 - 30 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ PP 2175HU-31 High Flow Copolymer Polypropylene
DescriptionPolyfort® PP 2175HU-31 is a high flow copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 20 - 30 g/10 min

@Load 5.00 kg,
Temperature 372 °C
20 - 30 g/10 min

@Load 11.0 lb,
Temperature 702 °F
Daikin NEOFLON AP-201SH PFA Semiconductor Grade
NEOFLON PFA semiconductor grade.Applications: Good fluidity, suited to making moldings of complex shapes, requiring high fluidity.Information provided by Daikin Industries.
Melt Flow 20 - 30 g/10 min

@Load 5.00 kg,
Temperature 265 °C
20 - 30 g/10 min

@Load 11.0 lb,
Temperature 509 °F
ASTM D1238
Covestro Makroblend® EL 703 Polycarbonate + Polyester-based Blend, Impact Modified, Flame-Retardant, UV Stabilized
Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.
Melt Flow 4.0 - 30 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 - 30 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
Aaron Industries AAROLENE® ARPP C 200-2 Polypropylene Compounded Resin
AAROLENE® ARPP 200 Series Polypropylene Compounded ResinColor may be specified. Melt Flow Index may be specified.
Melt Flow 20 - 30 g/10 min
20 - 30 g/10 min
ASTM D359
Asahi Glass Fluon® LM-730AP LM-ETFE Fluororesin
Fluon®LM-ETFE combines the excellent properties in heat resistance and other mechanical properties owned by ETFE resin and the low melting point.Information provided by Asahi Glass Company, Inc.
Melt Flow 25 - 30 g/10 min
25 - 30 g/10 min
ASTM D1238
Polymer Resources AC-GP3 Acetal Copolymer, High Flow, Thin Walled Molding  (Unverified Data**)
Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Melt Flow 10 - 30 g/10 min
10 - 30 g/10 min
ASTM D1238
Polymer Resources PPX/NY GP2 Modified PPO, Medium Heat PPX/Nylon 6,6 Alloy  (Unverified Data**)
Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Copyright © lookpolymers.com All Rights Reserved