Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 3.5 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 3.5 g/10 min

@Load 2.16 kg,
Temperature 210 °C
3.5 g/10 min

@Load 4.76 lb,
Temperature 410 °F
Noltex Soarnol® AT4403 Ethylene Vinyl Alcohol Copolymer
High ethylene content, low melting point. Suitable for use in multilayer structures where ease of thermoforming is required. Ethylene content 44 mol%.The gas barrier property of Soarnol is about fo..
Melt Flow 3.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
3.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
NOVA Chemicals Novapol® TF-0338-E Hexene LMDPE Film Resin
Excellent stiffness and glossApplications: Diaper back sheet, BlendingAdditives: High temperature AOFilm properties are typical of film extruded at 280°C.Information provided by NOVA Chemicals.
Melt Flow 3.5 g/10 min
3.5 g/10 min
Condition L 230/2.16; ASTM D1238
Pinnacle Polymers 1703 Polypropylene Homopolymer, Stretched Tape Grade
This Pinnacle Polymers Polypropylene is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties an..
Melt Flow 3.5 g/10 min
3.5 g/10 min
ASTM D1238
ExxonMobil LL 1235x70 Cast Film Resin  (discontinued **)
LL 1235x70 is a butene LLDPE with improved stiffness. It can be used alone or as a component in packaging and industrial film.Information provided by ExxonMobil Chemical
Melt Flow 3.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
3.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
Condition E; ASTM D1238
Formosa Plastics Formolene® L63935U Rotational Molding LLDPE  (discontinued **)
Hexene CopolymerApplications: Tanks, toys and other non-tank rotational molding applicationsFormolene L63935U is fully heat and UV stabilized.Meets all requirements of the U.S. Food and Drug Adminis..
Melt Flow 3.5 g/10 min
3.5 g/10 min
Condition G
Ineos Nova 4214 Medium Impact Polystyrene  (discontinued **)
Excellent balance of properties, USP Class VIApplications: Consumer electronics, Injection molding applicationsProperties were determined on injection molded specimens at 23°C and 50% R.H. unless o..
Melt Flow 3.5 g/10 min

@Load 5.00 kg,
Temperature 200 °C
3.5 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Ineos Nova 240 High Performance Styrenic Enhanced Polystyrene  (discontinued **)
Extremely high impact with good flexural stiffness, Custom colorsApplications: Injection molding, Small appliances, Photographic equipmentPerformance grades of polystyrene are engineered to have spe..
Melt Flow 3.5 g/10 min

@Load 2.16 kg,
Temperature 230 °C
3.5 g/10 min

@Load 4.76 lb,
Temperature 446 °F
Condition L; ASTM D1238
LyondellBasell Pro-faxâ„¢ PH350 Polypropylene Homopolymer
Description: Pro-faxâ„¢ PH350 general purpose polypropylene homopolymer resin is available as natural flake. Flake form resin is well suited for mixing with pigments and other additives to make p..
Melt Flow 3.5 g/10 min
3.5 g/10 min
ISO 1133
Iran Petrochemical (PCC) EP-T 30 R Polypropylene
The grade is a medium flow heterophasic the copolymer mainly designed for injection molding application.Application: containers, buckets, pails, crates and also used for automotive parts.Informatio..
Melt Flow 3.5 g/10 min

@Load 5.00 kg,
Temperature 280 °C
3.5 g/10 min

@Load 11.0 lb,
Temperature 536 °F
ASTM D1238
SABIC Innovative Plastics NORYL V0150B PPE+HIPS (Asia Pacific)
Noryl* V0150B is an unfilled, injection moldable modified polyphenylene ether resin.. Designed for high heat resistance and thin wall FR performance, this resin delivers a UL94 V0 rating at 1.5 mm a..
Melt Flow 3.5 g/10 min

@Load 21.6 kg,
Temperature 190 °C
3.5 g/10 min

@Load 47.6 lb,
Temperature 374 °F
ASTM D1238
Solvay Specialty Polymers Cogegum® GFR/350 Polyolefin
Cogegum® XLPO-HFFR - Crosslinkable Halogen Free Fire Retardant compound. Silane grafted compound moisture curable by addition of a catalyst masterbatch (Sioplas® method). It consists of a pol..
Melt Flow 3.5 g/10 min

@Load 10.0 kg,
Temperature 220 °C
3.5 g/10 min

@Load 22.0 lb,
Temperature 428 °F
ISO 1133
Styrolution Novodur® 530 ABS
Novodur 530 is an extrusion grade optimized for sheet applications. It has high impact properties, high modulus and good thermoforming.Information provided by Styrolution
Melt Flow 3.5 g/10 min

@Load 10.0 kg,
Temperature 230 °C
3.5 g/10 min

@Load 22.0 lb,
Temperature 446 °F
ASTM D1238
Techmer ES Statiblend® POM CO
Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified FillerReinforFeature: ConductiveTPCI# 9962114Information provided by TP Composites, Inc.
Melt Flow 3.5 g/10 min

@Load 5.00 kg,
Temperature 200 °C
3.5 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Samsung Cheil Industries Starex® AS-0151BS ABS, Unreinforced
Anti-static material that can be used in the housing of OA devices, IC, LSI carrier etc.Information provided by Samsung Cheil Industries.
Melt Flow 3.5 g/10 min

@Load 5.00 kg,
Temperature 200 °C
3.5 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Samsung Cheil Industries Starex® HF-0660IW ABS, Unreinforced
WNP high flow ABS materialInformation provided by Samsung Cheil Industries.
Melt Flow 3.5 g/10 min

@Load 10.0 kg,
Temperature 220 °C
3.5 g/10 min

@Load 22.0 lb,
Temperature 428 °F
ASTM D1238
Samsung Cheil Industries Starex® MG-0330 ABS, Unreinforced Heat Resistant
Information provided by Samsung Cheil Industries.
Melt Flow 3.5 g/10 min

@Load 5.00 kg,
Temperature 200 °C
3.5 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Samsung Cheil Industries Starex® VE-0812 ABS, Unreinforced FR
Information provided by Samsung Cheil Industries.
Melt Flow 3.5 g/10 min

@Load 3.80 kg,
Temperature 230 °C
3.5 g/10 min

@Load 8.38 lb,
Temperature 446 °F
ASTM D1238
Star Plastics ABS3545 Molding Grade ABS
Information provided by Star Plastics, Inc.
Melt Flow 3.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
3.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
SCG Chemicals EL-Leneâ„¢ LD2305F Low Density Polyethylene Film
Key Characteristics:Excellent clarity and glossGood zip formationContains 1000 ppm slip agent and 500 ppm antiblocking agentRecommended Applications:Zip bagsGeneral purpose film for food packagingIn..
Melt Flow 3.5 g/10 min

@Load 2.16 kg,
Temperature 230 °C
3.5 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Total PPC 4660 Polypropylene, Heterophasic Copolymer
ATOFINA Polypropylene PPC 4660 is heterophasic copolymer.
Melt Flow 3.5 g/10 min

@Load 2.16 kg
3.5 g/10 min

@Load 4.76 lb
Melt flow ratio I10/I2 is 8.5.
Dow AFFINITY™ PL 1845 Polyolefin Plastomer
Film properties below based on a film thickness of 25 µm. Data provided by Dow Chemical.
Melt Flow 3.5 g/10 min
3.5 g/10 min
ASTM D1238
ExxonMobil Exceed™ 3512CB Film Resin
Exceed 3512CB resin is a hexene copolymer produced using ExxonMobil Chemicals Exxpol® Technology. Films made from 3512CB resin have outstanding cold temperature toughness, impact strength and punc..
Melt Flow 3.5 g/10 min

@Load 21.6 kg,
Temperature 150 °C
3.5 g/10 min

@Load 47.6 lb,
Temperature 302 °F
ISO 1133
Fainplast Compounds Hax™ HF 224/4 Flame Retardant Polyolefin Cable Compound
Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:Sheathing, insulation, high flexibilityInformation provided by Fainplast Compounds
Melt Flow 3.5 g/10 min

@Load 2.16 kg,
Temperature 230 °C
3.5 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
Braskem H 503 Raffia Extrusion & Fiber Extrusion Polypropylene Homopolymer
ApplicationsRaffia Extrusion: Industrial bags; Flexible containers; Curtains and covers to aviary and agriculture.Fiber Extrusion: Monofilament for ropes; Fishing nets; Cables and ropes for boats; ..
Melt Flow 3.5 g/10 min

@Load 2.16 kg,
Temperature 190 °C
3.5 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM-D1238
Braskem RC35U4 LLDPE Rotomolding Polyethylene
The resin RC35U4 is a linear low-density polyethylene, 1-butene based, with high stiffness and an adequate balance of processability and environmental stress cracking resistance. It contains long te..
Melt Flow 3.5 g/10 min

@Load 5.00 kg,
Temperature 200 °C
3.5 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Americas Styrenics STYRON® 498 High Impact Polystyrene
Product CharacteristicsHigh glossHigh impactFood Contact CompliantUL Classification 94HBTypical ApplicationsAppliancesMedicalHousewaresConsumer electronicsInformation provided by AmericasStyrenics L..
Melt Flow 3.5 g/10 min
3.5 g/10 min
ASTM D1238
ExxonMobil Exceed™ 3518 CB Premium Cast Film Resin
Exceed 3518 resins are hexene copolymer produced using ExxonMobil Chemicals Exxpol® Technology. Films made from 3518 resins have outstanding tensile properties and impact and puncture toughness. ..
Melt Flow 3.5 g/10 min

@Load 21.6 kg,
Temperature 150 °C
3.5 g/10 min

@Load 47.6 lb,
Temperature 302 °F
ISO 1133
Fainplast Compounds Hax™ HF 223F Flame Retardant Polyolefin Cable Compound
Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:High flexibility, good stress crack resistanceInformation provided by Fainplast Compound..
Melt Flow 3.5 g/10 min
3.5 g/10 min
Condition E; ASTM D 1238
Chevron Phillips 6335B LLDPE Cast/Blown Film Resin, Butene Copolymer  (discontinued **)
Resin Type: Butene Copolymer, Medium Slip Version of 6335Characteristics: Good Optics, Good Drawdown, Can be used straight or blended with LDPE or HDPE, Can be used in blown or cast applications, Lo..
Copyright © lookpolymers.com All Rights Reserved