- HOME
- POLYMER SEARCH
- Thermoplastic
- Styrene-Butadiene
- Styrene/Butadiene/Styrene (SBS)
- Kraton® D1102 E (SBS) Liner Block Copolymer
Kraton® D1102 E (SBS) Liner Block Copolymer
| Category | Polymer , Thermoplastic , Styrene-Butadiene , Styrene/Butadiene/Styrene (SBS) |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D1102 E (SBS) Liner Block Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D1102 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature:D1102 ET - supplied as porous pellets dusted with talcD1102 ES - supplied as porous pellets dusted with amorphous silicaD1102 ESM - supplied as powder dusted with amorphous silicaD1102 EU - supplied as porous pellets undustedRegion: Asia Pacific, Europe, Japan, North America and South AmericaUses: Kraton D1102 E is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.Applications: Bitumen Modification; Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Footwear; Impact Modification; Medical; Packaging and Polymod; Personal Care; and Roads and RoofingInformation provided by Kraton®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.940 g/cc | 0.940 g/cc | ISO 2781 |
| Bulk Density | 0.400 g/cc | 0.0145 lb/in³ | ASTM D 1895 method B |
| Volatiles | <= 0.30 % | <= 0.30 % | KM 04 |
| Viscosity | 750 - 1450 cP | 750 - 1450 cP | 25% Toluene Solution at 25°C; KM 06 |
| Melt Flow | 12 g/10 min @Load 5.00 kg, Temperature 200 °C |
12 g/10 min @Load 11.0 lb, Temperature 392 °F |
ISO 1133 |
| Ash | 0.15 - 0.40 % | 0.15 - 0.40 % | ES; ISO 247 |
| 0.15 - 0.40 % | 0.15 - 0.40 % | ET; ISO 247 | |
| 2.5 - 5.0 % | 2.5 - 5.0 % | ESM; ISO 247 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 66 @Time 30.0 sec |
66 @Time 0.00833 hour |
Measured on compression molded slabs; ISO 868 |
| Tensile Strength | 33.0 MPa | 4790 psi | measured on films cast from a solution in toluene; ISO 37 |
| Elongation at Break | 880 % | 880 % | Measured on films cast from a solution in toluene; ISO 37 |
| 300% Modulus | 0.00290 GPa | 0.421 ksi | Measured on films cast from a solution in toluene; ISO 37 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 17 % | 17 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Polystyrene | 27-30%, KM 03 |
| Total Antioxidant | >0.15%, KM 08 | |
| Total Extractables | <1.0%, KM 05 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved