Physical Properties | Metric | English | Comments |
---|---|---|---|
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | Loose |
Nyco M200 WOLLASTOCOAT® Wollastonite Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance mineral for a br.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | Tapped |
Nyco NYAD® 5000 WOLLASTOCOAT® Wollastonite This grade is recommended for polymer reinforcement.Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology make.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | Vibrated; ASTM D1895 |
Eastman CB11E PET
(discontinued **) VORIDIAN PET CB11E is designed specifically for the carbonated soft drink (CSD) and other beverage markets in the European market area. The polymer delivers faster, more efficient processing and bet.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | Vibrated (Mexico Produced); ASTM D1895 |
Eastman CB12 PET
(discontinued **) Voridian CB12 polymer is a polyethylene terephthalate resin designed specifically for the carbonated soft drink (CSD) and other beverage markets. CB12 delivers fast, efficient processing and good ov.. |
|||
Bulk Density | 0.880 - 0.940 g/cc | 0.0318 - 0.0340 lb/in³ | DIN 53466 |
Stanelco Bioplast® GS 2189 Biodegradable Plastic Bioplast 2189 is a product that is optimised for sheet extrusion, injection and compression moulding. It is always biodegradable and readily compostable in thin sections, this material is useable i.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | ASTM D1895 |
Plenco 1530 Polyester, Briquette, Transfer Molded PLENCO 01530 is a glass and mineral reinforced pelletized polyester molding compound, offering improved mechanical strength properties along with excellent electrical properties and dimensional stab.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | |
Zircar Zirconia ZG Low Mass Zirconia Grog Insulation Zircar Zirconia Low Mass Grog Type ZG is high fired, fibrous yttria-stabilized zirconia particles, ideally suited for thermal insulation under conditions of ultra high temperatures. Type ZG exhibits.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | |
DuPont™ Nomex® 414 Paper, 3.4 mil Nominal Thickness Nomex® Type 414 is designed for uses requiring a strong, yet flexible and conformable sheet. It is electrically and thermally similar to Type 410. Type 414 was designed as slot insulation in hand.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | ASTM D894 |
Daikin POLYFLON M-392 PTFE Molding Powder, Free Flow Free flow powder.Processing Methods: Compression molding, automatic or semi-automatic compression molding, isostatic molding, and ram extrusion.Features: Good fill characteristics particularly into .. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | 1/MA/1/008 |
Dow LIGHTER™ C88 Polyethylene Terephthalate (PET) Resin LIGHTER™ resins are polyethylene terephthalate produced from PTA and MEG. These polymers are specifically designed for the production of beverage, food and other liquid containers and for thermofo.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | 1/MA/1/008 |
Dow LIGHTER™ C93 Polyethylene Terephthalate (PET) Resin LIGHTER™ resins are polyethylene terephthalate produced from PTA and MEG. These polymers are specifically designed for the production of beverage, food and other liquid containers and for thermofo.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | 1/MA/1/008 |
Dow LIGHTER™ C98 Polyethylene Terephthalate (PET) Resin LIGHTER™ resins are polyethylene terephthalate produced from PTA and MEG. These polymers are specifically designed for the production of beverage, food and other liquid containers and for thermofo.. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | 1/MA/1/008 |
Dow LIGHTER™ S93 Polyethylene Terephthalate (PET) Resin LIGHTER™ S93 is a polyester polymer modified to improve infrared reheating of preforms. It provides very good mechanical properties and a wide processing range on all injection molding machines. .. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | 1/MA/1/008 |
Dow LIGHTER™ S98 Polyethylene Terephthalate (PET) Resin LIGHTER™ S98 is a polyester polymer modified to improve infrared reheating of preforms. It provides very good mechanical properties and a wide processing range on all injection molding machines. .. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | |
Asahi Glass Fluon® PA1015Z 15% Glass Fiber, PTFE Filled Compound Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Information provided by Asahi Glass Company, Inc. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | |
Asahi Glass Fluon® PA1020Z 20% Glass Fiber, PTFE Filled Compound Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Information provided by Asahi Glass Company, Inc. |
|||
Bulk Density | 0.880 g/cc | 0.0318 lb/in³ | |
Zircar Zirconia ZG Low Mass Zirconia Grog Insulation Zircar Zirconia Low Mass Grog Type ZG is high fired, fibrous yttria-stabilized zirconia particles, ideally suited for thermal insulation under conditions of ultra high temperatures. Type ZG exhibits.. |