Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.80 g/cc | 0.0650 lb/in³ | 3.6 mil thickness; ASTM D792 |
Rogers Corporation RO4450B Prepreg Prepreg is commonly used to inexpensively form less critical signal layers in antenna designs. A high post-cure Tg makes RO4400 series prepreg an excellent choice for multi-layers requiring sequent.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | ASTM D792 |
Rogers Corporation RO4533 Ceramic-Filled, Glass-Reinforced Hydrocarbon Laminate The RO4500™ Series Cost Performance Antenna Grade Laminates are ceramic-filled, glass-reinforced hydrocarbon based materials that provides the controlled dielectric constant, low loss performance a.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | ASTM D792 |
Rogers Corporation RO4535 Ceramic-Filled, Glass-Reinforced Hydrocarbon Laminate The RO4500™ Series Cost Performance Antenna Grade Laminates are ceramic-filled, glass-reinforced hydrocarbon based materials that provides the controlled dielectric constant, low loss performance a.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | |
3M Dyneon™ Fluorel™ Dipolymer, 35% Carbon Black Filled
(discontinued **) Data provided by the manufacturer, Dyneon LLC.66% fluorine content. See the many specific grades of Fluorel™ fluoroelastomer in MatWeb. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | ASTM D792 |
G-3 Fiberglass Phenolic Laminate Sheet This material is made from woven glass cloth and high-temperature phenolic resin. It has excellent flexural, compressive and impact strengths. Physical strength, resiliency, ease and versatility of .. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | ISO 1183A |
Chevron Phillips Xtel® XK2760BL Polyphenylene Sulfide Alloy
(discontinued **) Xtel® XK2760BL is a high performance, glass fiber and mineral filled PPS based alloy developed to provide excellent mechanical strength with a unique blend of toughness, rigidity, and low flash cha.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | ISO 1183 |
Menzolit Menzolit® HPC 1200 Unsaturated Polyester UP HPC 1200 is a special SMC for high strength applications. The glass level has been selected to combine mouldability with high strength and stiffness properties in orientation direction. The reinforc.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | Fiber Density |
SGL Carbon Group SIGRAFIL C® C25 M350 UNS Milled Carbon Fiber, Unsized Carbon Fiber Milled SIGRAFIL C is excellent for making materials electrically conductive such as powders, dry mixtures, adhesives, floorings, aqueous adhesive systems and all aqueous mixing processes. Milled SIG.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | Fiber Density |
SGL Carbon Group SIGRAFIL C® C25 P350 GLY Pelletized Carbon Fiber, Glycerine Sizing Milled SIGRAFIL C is excellent for making materials electrically conductive such as powders, dry mixtures, adhesives, floorings, aqueous adhesive systems and all aqueous mixing processes. Milled SIG.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | Fiber Density |
SGL Carbon Group SIGRAFIL C® C25 S003 EPY Staple Carbon Fiber, Epoxy Sizing In its precision cut staple form SIGRAFIL C is a superior free-flowing material suitable for low and high temperature thermoplastic injection-molding processes. It is also an excellent way of making.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | Fiber Density |
SGL Carbon Group SIGRAFIL C® C25 S006 EPY Staple Carbon Fiber, Epoxy Sizing In its precision cut staple form SIGRAFIL C is a superior free-flowing material suitable for low and high temperature thermoplastic injection-molding processes. It is also an excellent way of making.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | Fiber Density |
SGL Carbon Group SIGRAFIL C® C25 S006 GLY Staple Carbon Fiber, Glycerine Sizing In its precision cut staple form SIGRAFIL C is a superior free-flowing material suitable for low and high temperature thermoplastic injection-molding processes. It is also an excellent way of making.. |
|||
Density | 1.80 - 1.82 g/cc | 0.0650 - 0.0658 lb/in³ | ISO 1183 |
Solvay Specialty Polymers Solef® 60512/0550 and 60512/0150 Polyvinylidene Fluoride (PVDF) Solef® 60512/0550 and Solef® 60512/0150 are PVDF grades compounded with PTFE for extrusion of anti-wear tapes.Features: CopolymerUses: TapeAdditional Properties: Crystallization Heat - ASTM D3.. |
|||
Density | 1.80 g/cc @Temperature 25.0 °C |
0.0650 lb/in³ @Temperature 77.0 °F |
|
Solvay Specialty Polymers Galden® LLS215 PFPE VPS Fluid Galden® LS and HS grades are specifically recommended for vapor phase soldering.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of servic.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | |
Zircar Ceramics HITAC-4 High Alumina Refractory Adhesive High Alumina Refractory Adhesive Type HITAC-4 is a single part water based high alumina containing adhesive. Specifically developed for bonding low-density fibrous ceramic insulation materials toge.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | Cured |
Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | |
Cotronics Duralco™ 4703 Adhesive and Tooling Compound High temperature resin reinforced with ceramic and metallic fibers and particles, resulting in high thermal stability. Easily machined to close tolerances and will repair and rebuild worn or cracke.. |
|||
Density | 1.80 g/cc @Thickness >=0.000 mm |
0.0650 lb/in³ @Thickness >=0.000 in |
24hr/23°C/50% RH; ISO 1183-A; IEC/EN 61212-2 7.3 |
Elektro-Isola G-Etronax SI Silicone, Glass Fabric Reinforcement, White, Tubes Description: Used in mechanical, electrical and electronic applications at elevated temperatures. Retains good electrical properties at high temperatures. Self-extinguishing. Low dielectric loss fac.. |
|||
Density | 1.80 - 1.84 g/cc | 0.0650 - 0.0665 lb/in³ | ISO R 1183 |
Fainplast Compounds CRK 84 Flexible PVC, Electrical Bedding Lead Free Bedding |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | |
Bond Laminates TEPEX® dynalite 102-RGUD600(x)/47% Roving Glass – PA 6 Consolidated Composite Laminate Within the TEPEX® composite laminate, Polyamide 6 is a resin known for its toughness, stiffness, abrasion resistance, heat and chemical resistances. Roving E-Glass fibers have an excellent impact .. |
|||
Density | 1.80 g/cc | 0.0649 lb/in³ | |
Abatron AboWeld 8708-5 One-Component Structural/Dielectric Epoxy AboWeld 8708-5 is a highly filled, class H (180°C) structural, heat-conductive adhesive paste for SLOW high-temperature curing. Suggested Uses: Structural bonding; Casting; Potting; Encapsulating;.. |
|||
Density | 1.80 g/cc | 0.0649 lb/in³ | |
Abatron AboWeld 8708-7 One-Component Structural/Dielectric Epoxy AboWeld 8708-7 is a highly filled, class H (180°C) structural, heat-conductive adhesive paste for FASTER high-temperature curing. Suggested Uses: Structural bonding; Casting; Potting; Encapsulatin.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | ASTM D792 |
Applied Composites 8007 Polyester SMC Industry Application: ConstructionProduct Application: Water TreatmentDistinct Features: Pigmentable, Low Water Absorption, Weathering Resistant, Good Corrosion Resistance in Waste Water Environment.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | |
Aremco Ceramacast™ 673-N High Temperature Potting & Casting Material Silicon Carbide Single-part castable ceramic exhibiting high strength and thermal conductivity. |
|||
Density | 1.80 g/cc | 0.0649 lb/in³ | Part A |
Abatron BronzeWeld-P™ Bronze-Filled, Structural Adhesive Putty; Paste BronzeWeld-P™ is a bronze-filled structural adhesive putty. Ideal for statuary, antiques, boats, transportation equipment, vases, railings, metal furniture, metal trim, frames, and instruments. Use.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | |
BASF Paliotol™ Yellow K 0961 HD Color Additive Chemical Structure: Chinophthalone Yellow Application: Colourant for plastics; PVC-p, PVC-u, PUR, LD-PE, HD-PE, PP, PS, SB, SAN, CA/CAB, and UPRecommendations for food applications: BgVV, FDA, Franc.. |
|||
Density | 1.80 g/cc | 0.0650 lb/in³ | ISO 1183 |
Polyram RamOfin PPC350M6 Polypropylene, 30% Mineral Filled 30% Mineral filled, heat stabilized polypropylene for injection molding applications.Information provided by Polyram. |
|||
Density | 1.80 - 1.90 g/cc | 0.0650 - 0.0686 lb/in³ | ISO 1138 |
Bulk Molding Compounds tetra-DUR F 4206 Bulk Molding Compound General purpose productTypical Applications - Requiring mechanical strength, abrasion resistance, dimensional stability, electrical insulation, electrostatic dissipation (explosion protection), ther.. |