Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO.1183 DIN.53479 |
Omnia Plastica Akulon® POM h Acetal Homopolymer The general features of homopolymer acetalic resin are similar to those of copolymer POM c, except that service temperature (under load) is slightly higher but resistance to hydrolysis and strong al.. |
|||
Density | 1.42 g/cc @Temperature 23.0 °C |
0.0513 lb/in³ @Temperature 73.4 °F |
±0.02; ISO 1183 |
PolyOne Bergadur™ PB40 G15 blue Polybutylene Terephthalate (PBT) Information provided by PolyOne |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | DAM; ISO 1183 |
DuPont Performance Polymers Zytel® HTN 54G35HSLR NC010 Polyphthalamide (PPA)
(Unverified Data**) Zytel® HTN54G35HSLR NC010 is a 35% glass reinforced, toughened, heat stabilized, lubricated high performance polyamide resin. It is also a PPA resin.Information provided by DuPont Performance Polym.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
LATI LAPEX A G/10 10% Glass Fiber Reinforced Polyethersulfone (PES) (UL94 V-0)
(Unverified Data**) Description: Lapex A compounds are polyethersulfone (PES) products. They are high temperature compounds offering an interesting combination of properties. Lapex A provides outstanding thermal resist.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
DuPont Performance Polymers Delrin® 327UVE RD402 Acetal Homopolymer
(Unverified Data**) Delrin® 327UVE RD402 (formerly DE20554) is a medium-high viscosity acetal homopolymer with UV stabilizers having extremely low VOC emissions, developed for automotive interior applications.Informat.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ASTM D792 |
Plenco Valite 424 Novolac Phenolic, Granular, Injection Molded
(discontinued **) This Valite product has been replaced by Plenco 2424. Data provided by Plenco.VALITE 424 is a black, two stage, general purpose phenolic molding compound. It has a good balance of properties for a .. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | |
Momentive Performance Materials RTV31 Red Extreme High Temperature Potting/Encapsulating Compound Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP LCL33 PEEK (Europe-Africa-Middle East) LNP* LUBRICOMP* LCL33 is a compound based on Polyethereketone resin containg Carbon Fiber, PTFE. Added features include: Elecrtically Conductive , Internally Lubricated. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP RL008 PA 66 (Europe-Africa-Middle East) LNP* LUBRICOMP* RL008 is a compound based on PA 66 containing PTFE. Added features include: Internally Lubricated. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
SABIC Innovative Plastics ULTEM 2200F PEI (Europe-Africa-Middle East) 20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Resin is RoHS compliant. US FDA and European Food Contact approved. Effective June, 2007 this grade will no longer be supported with b.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRICOMP WAL34 PBT (Asia Pacific) LNP* Lubricomp* WAL34 is a compound based on Polybutylene Terephalate resin containing PTFE, Aramid Fiber. Added features of this material include: Internally Lubricated. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ASTM D792 |
Solvay Specialty Polymers AvaSpire® AV-722 CF30 Polyaryletherketone (PAEK), 30% Carbon Fiber AvaSpire® AV-722 CF30 is a 30% carbon fiber reinforced version of AvaSpire® AV-722. This formulation offers improved part economics relative to 30% carbon fiber reinforced PEEK while retaining.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ASTM D792 |
Solvay Specialty Polymers Ryton® XE5515BL Polyphenylene Sulfide Alloy (PPS Alloy), 15% Glass Fiber Ryton® XE5515BL 15% glass fiber reinforced polyphenylene sulfide alloy compound provides excellent mechanical strength and chemical resistance at elevated temperatures and is suitable for extrusi.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Valox® VIC4311 PBT VALOX VIC4311 is a 30% glass filled, impact modified PBT with excellent epoxy adhesion. Automotive underhood applications such as ignition coil housings. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP DF006RXQ PC LNP* THERMOCOMP* DF006RXQ is a compound based on Polycarbonate resin containing 30% Glass Fiber. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP VERTON RX89047 PA 66 LNP* VERTON* RX89047 is a compound based on Nylon 66 resin containing Proprietary Fillers. Added feature of this grade is: Structural. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ASTM-D792 |
Polyram Polytron A35B01 Nylon 66, Chemically Coupled 35% Long Fiber A CHEMICALLY COUPLED 35% LONG FIBER GLASS REINFORCED BLACK NYLON 6.6 HEAT STABILIZED FOR INJECTION MOLDING APPLICATION.Information provided by Polyram Ram On Ind. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183-87 |
Wellman Wellamid® GS40-60 42L-NBK1 40% Glass Sphere Reinforced Nylon 6 Description: Glass Sphere Reinforced Nylon 6Information provided by Wellman. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | |
DuPont™ Kapton® 300A Polyimide Film, 75 Micron Thickness Film thickness 75 micron (3.0 mil)Kapton® Type A is a lower modulus film, which is conducive to dynamic flex applications.General Kapton® information: Kapton® is synthesized by polymerizing an a.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | |
DuPont™ Kapton® 50FPC Polyimide Film, 13 Micron Thickness Film thickness 13 micron (0.5 mil)All purpose polyimide film. Can be laminated, diecut, slit, formed, or adhesive-coated. Similar to Kapton® Type VN with improved bondability. Available in thick.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
DuPont Performance Polymers Delrin® FG311DP NC010 Acetal (POM)
(Unverified Data**) Nucleated Medium-high Viscosity Acetal Homopolymer Developed for Food Contact Applications Delrin FG311DP is a medium-high viscosity acetal homopolymer with improved thermal stability and modificati.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | DAM; ISO 1183 |
DuPont Performance Polymers Zytel® 77G43L NC010 Nylon 612
(Unverified Data**) 43% Glass Reinforced Polyamide 612Zytel 77G43L NC010 is a 43% glass fiber reinforced polyamide 612 resin for injection molding.Information provided by DuPont Performance Polymers |
|||
Density | 1.42 - 1.46 g/cc | 0.0513 - 0.0527 lb/in³ | ISO R 1183 |
Fainplast Compounds GA 72 Flexible PVC, Flame Retardant Sheathing General purposes |
|||
Density | 1.42 - 1.46 g/cc | 0.0513 - 0.0527 lb/in³ | ISO R 1183 |
Fainplast Compounds GA 90/R Flexible PVC, Flame Retardant Sheathing Hydrocarbon resistant |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
DuPont Performance Polymers Delrin® 500PE NC010 Acetal (POM)
(Unverified Data**) Medium Viscosity Acetal Homopolymer with Very Low Emissions Delrin 500PE NC010 (formerly DE20578) is a medium viscosity acetal homopolymer an enhanced version of Delrin 500P with very low VOC emissi.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | |
Arkema Group Rilsan® AUM 50 NOIR T6LD Nylon 12, 50% Glass Bead Filled (Conditioned) Designation ISO 1874-PA12,MHLR,16-020,GB50Rigid grad with glass beads filler (50%) for injection molding. Available color: black. Reinforced light and heat stabilizing agents. Mold-release agent.Goo.. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP DFP34 PC LNP* Lubricomp* DFP34 is a compound based on Polycarbonate resin containing 20% Glass Fiber, 15% PTFE/Silicone. Added features of this material include: Internally Lubricated. |
|||
Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Thermocomp QF008S PA 6/10 (Asia Pacific) LNP* Thermocomp* QF008S is a compound based on Nylon 6/10 resin containing Glass Fiber. Added features of this material include: Heat Stabilized.This data was supplied by SABIC-IP for the Asia Paci.. |