Total 3802 B HDPE, cable, sheet, pipe, injection molding

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Pipe Grade
Manufacturer	Total Atofina
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Total 3802 B HDPE, cable, sheet, pipe, injection molding.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

FINATHENE® 3802 B is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low-pressure slurry polymerization process. FINATHENE® 3802 B is a black polyethylene developed for cable sheathing applications and is designed to meet the requirements for telecommunication cables and power cable (medium and high voltage). FINATHENE® 3802 B is a black medium density polyethylene specially developed for potable water and gas distribution applications.Information provided provided by Total Petrochemicals.Total Petrochemicals acquired former Fina and Atofina plastics product lines.

Physical Properties	Metric	English	Comments
Density	0.948 g/cc	0.0342 lb/in³	ISO 1183
Viscosity	1.30e+6 cP @Shear Rate 100 1/s, Temperature 190 °C	1.30e+6 cP @Shear Rate 100 1/s, Temperature 374 °F	ATOFINA research test
Environmental Stress Crack Resistance	>= 1000 hour	>= 1000 hour	ASTM D1693 cond. B
Oxidative Induction Time (OIT)	>= 30 min	>= 30 min	EN 728
Carbon Black Loading	2.0 - 2.5 %	2.0 - 2.5 %	ISO 6964
Melt Flow	0.20 g/10 min @Load 2.16 kg	0.20 g/10 min @Load 4.76 lb	ISO 1133
	0.92 g/10 min @Load 5.00 kg	0.92 g/10 min @Load 11.0 lb	ISO 1133
High Load Melt Index	18 g/10 min @Load 21.6 kg	18 g/10 min @Load 47.6 lb	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	60	60	DIN 53505
Tensile Strength at Break	32.0 MPa	4640 psi	ISO 527
Tensile Strength, Yield	18.0 MPa	2610 psi	ISO 527
Elongation at Break	>= 700 %	>= 700 %	ISO 527
Elongation at Yield	9.0 %	9.0 %	ISO 527
Modulus of Elasticity	0.700 GPa	102 ksi	ISO 178
Flexural Modulus	0.800 GPa	116 ksi	ASTM D 790

Thermal Properties	Metric	English	Comments
Heat of Fusion	152 J/g	65.4 BTU/lb	DSC
CTE, linear	120 µm/m-°C @Temperature 20.0 °C	66.7 µin/in-°F @Temperature 68.0 °F
Specific Heat Capacity	2.00 J/g-°C	0.478 BTU/lb-°F	DSC
	2.60 J/g-°C @Temperature 150 °C	0.621 BTU/lb-°F @Temperature 302 °F	DSC
Thermal Conductivity	0.400 W/m-K	2.78 BTU-in/hr-ft²-°F	DIN 52612
	0.200 W/m-K @Temperature 150 °C	1.39 BTU-in/hr-ft²-°F @Temperature 302 °F	DIN 52612
Melting Point	125 - 129 °C	257 - 264 °F	crystalline; DSC
Vicat Softening Point	125 °C	257 °F	ISO 306
Brittleness Temperature	-100 °C	-148 °F	ASTM D 746

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+16 ohm-cm	>= 1.00e+16 ohm-cm	IEC 93
Surface Resistance	>= 1.00e+16 ohm	>= 1.00e+16 ohm	IEC 93
Dielectric Constant	2.35 @Frequency 1000 Hz	2.35 @Frequency 1000 Hz	IEC 250
Dielectric Strength	16.0 kV/mm	406 kV/in	IEC 243
Dissipation Factor	0.00020 @Frequency 1000 Hz	0.00020 @Frequency 1000 Hz	IEC 250
	0.00030 @Frequency 1e+6 Hz	0.00030 @Frequency 1e+6 Hz	IEC 250

Users viewing this material also viewed the following: