- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Tipco Tipcofil® AG 800 - 40% Glass Fiber Reinforced Nylon-6 Compound, with High Heat Stability
Tipco Tipcofil® AG 800 - 40% Glass Fiber Reinforced Nylon-6 Compound, with High Heat Stability
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 |
| Manufacturer | Tipco Industries Ltd., India |
| Trade Name | Tipcofil® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Tipco Tipcofil® AG 800 - 40% Glass Fiber Reinforced Nylon-6 Compound, with High Heat Stability.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
40% Glass Reinforced Nylon-6 CompoundApplications: General PurposeProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd.,
India.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.47 g/cc | 0.0531 lb/in³ | ASTM D792 |
| Water Absorption | 1.0 % | 1.0 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | ASTM D955 |
| Melt Flow | 5.0 g/10 min | 5.0 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 180 MPa | 26100 psi | ASTM D638 |
| Elongation at Break | >= 4.0 % | >= 4.0 % | ASTM D638 |
| Flexural Yield Strength | 225 MPa | 32600 psi | ASTM D790 |
| Flexural Modulus | 9.40 GPa | 1360 ksi | ASTM D790 |
| Izod Impact, Notched (ISO) | 13.0 kJ/m² | 6.19 ft-lb/in² | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 220 °C | 428 °F | ASTM D648 |
| Vicat Softening Point | 218 °C | 424 °F | ASTM D1525 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 270 °C | 518 °F | |
| Rear Barrel Temperature | 250 °C | 482 °F | |
| Middle Barrel Temperature | 260 °C | 500 °F | |
| Front Barrel Temperature | 270 °C | 518 °F | |
| Nozzle Temperature | 265 °C | 509 °F | |
| Mold Temperature | 105 °C | 221 °F | |
| Drying Temperature | 85.0 °C | 185 °F |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Rigid Molding M5100 Natural Polyvinyl Chloride, Rigid (PVC, Rigid)
- PolyOne Geon™ Vinyl Flexible XV3870 Polyvinyl Chloride, Flexible (PVC, Flexible)
- Lord Adhesives Aeroglaze® 9743 Epoxy Primer/Tie-Coat
- Styron XZ 92087.00 Carboxylated SB
- SCG Chemicals EL-Leneâ„¢ LD1905FA Low Density Polyethylene Film
- 3M FM024 Indoor UL Recognized Clear Polyester Overlaminate Label Product
- BASF Ultramid® 7423-2 NF3001 13% Glass Filled PA66 (Dry)
- Breplast Bretene TS COR HF Dark High Density Polyethylene
- LATI Latimass 53-04 D009 PP Homopolymer, Impact Modified
- Arlon 32300R062 0.062" (1.57 mm) Uncured Silicone Rubber on PET Carrier
Copyright © lookpolymers.com All Rights Reserved